Professional Documents
Culture Documents
Service/Spare Parts
Visit our homepage
for additional support
Series F11
parker.com/pmde
Effective: March, 2023
Supersedes: February, 2022
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
Series F11
2 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
Series F11
Content Page
General Information.................................................................................... 4
Cross section..............................................................................................4
Specification............................................................................................... 5
Preparation................................................................................................. 6
Tools required............................................................................................. 6
Disassemble F11 ................................................................................. 7 – 10
Assembly F11......................................................................................11 – 15
Torque..................................................................................................... 16
Barrel retaining ring.............................................................................17 – 19
Test procedur.............................................................................................20
Cavitation.......................................................................................... 21 – 24
Split view F11........................................................................................... 25
Part specification F11................................................................................ 26
F11 spare part list.............................................................................. 27 – 32
How to select spare part guide............................................................ 33 – 39
3 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
General Information Series F11
4
3
1 5 2
4 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
Specifications Series F11
5 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
Preparation, Tools required Series F11
Preparation
Before disassembling motor:
• Always keep work space clean
• Always use correct tools
• Make documentation and take
photos if required
• Only use standard spare parts
from Parker
Tools required
• Retaining ring tool, internal and
external
• Hex key
• Screw driver
• Plier
• Plastic hammer
• Mandrel
• Hook tool
• Torque wrench
• Brush
• Hydraulic press
6 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
Disassembling Series F11
Disassemble F11
7 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
Disassembling Series F11
Disassemble F11
5. Remove the shaft seal carefully with 6. Remove the bearing housing by tapping
screw driver and hammer. carefully underneath with hammer.
8 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
Disassembling Series F11
Disassemble F11
9. Remove shims and guide spacer. Screw 10. Remove the O-rings from the guide
driver can be used carefully. spacer.
11. Remove the cylinder barrel by holding 12. Remove the valve plate with a hook
the housing as shown on picture and tool or retaining ring tool carefully.
gently tap to work bench.
9 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
Disassembling Series F11
Disassemble F11
13. Tap the locker ring. 14. Untighten the round nut and remove
locker rings.
10 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
sembling
Assembling
letin MSG30-5511-M1/UK
Bulletin MSG30-5511-M1/UK ServiceSeries
Service Manual/Spare F11
Se
Parts
Manual/Sp
Bulletin
sembling MSG30-5511-M1/UK Service Manual/Spare Parts F11
Series
Assembling Se
ssembly F11
Assembly
Assembling
F11 Series F11
Place 1.
thePlace
ring gear on the
the ring gearshaft
on the shaft 2. Press 2. down
Press thedown
largethetapered
large tapere
1. Place the ring gear on the shaft with 2. Press down the large tapered roller bea-
h the guide
with
Place 1.
thethe pin
the
ring
Place located
guide
gear
the pinagainst
on the
ring located
gearshaft the
ontheagainst
theguide the
roller
shaft 2. ring bearing
roller together
bearing with the
together ring
with the
guide pin located against Press down
2.
together withthe
Press large
thedown
ring tapered
the
gear. large tapere
de hole.
guide
h the guide
with hole.
pinguide
the
hole. located pinagainst
locatedthe gear.
against the gear.
roller bearing
rollertogether with the ring
bearing together with the
de hole.
guide hole. gear. gear.
3. Place the distance ring on the large 4. Place the small tapered roller bearing
Place 3.
thetapered
distance
Place ring
the distance
roller on the
bearing. ring on the 4. Place 4. thePlace
smallthetapered
small roller
on the shaft as on the picture.
tapered rolle
ge tapered roller bearing on the
bearing shaft
on as
the on the
shaft picture.
as on rolle
the
Place large
thePlace
3. thebearing.
tapered
distance roller
ring onbearing.
distance the
ring on the 4. Place 4. thePlace
smallthetapered
small roller
tapered
ge tapered
large roller bearing.
tapered roller bearing. bearing on the shaft
bearing as on
on the theas
shaft picture.
on the
11 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
letin MSG30-5511-M1/UK
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
Service Manual/Sp
ssembly
Assembly
sembling F11
Bulletin
Assembling F11
MSG30-5511-M1/UK Service Manual/Spare Parts F11
Series Se
Assembling Series F11
Press 5.down
Press thedown
smallthe
tapered
small roller
tapered roller
6. Place 6.
thePlace
lock washers
the lock washers
on the on th
aring inbearing
small steps
in small
until
steps
correct
until correct shaft. shaft.
5. Press down the small tapered roller bea- 6. Place the lock washers on the shaft.
load is
Press 5.preload
achived. is small
achived.
ring in small
down the Not totapered
steps tight
Not
until and
to
correct tight
no and 6.
preload
roller no
Press down the small tapered rollerPlace 6.
thePlace
lock washers on the on th
the lock washers
klash.
aring inbacklash.
is achived. Not to tight and no backlash.
small steps until correct
bearing in small steps until correct shaft. shaft.
load ispreload
achived. Not to tight
is achived. Notand no and no
to tight
klash.backlash.
7. Assemble the round nut and tighten it 8. Secure the round nut as shown in the
ssemble7. Assemble
theone
until round the
nutisround
opening and
in nutposition
correct and 8. Secure
picture. 8.the
Secure
roundthe nutround
as shown nut asinsho
the
ten it tighten
until
for one
theitlock
until
opening
one is
washer. opening
in is in picture. picture.
ect position
ssemblecorrect
thefor
position
the lock
round forand
nut washer.
the lock washer.
7. Assemble the round nut and 8. Secure8.the roundthe
Secure nutround
as shown nut asinsho
the
ten it tighten
until one opening
it until one is in
opening is in picture. picture.
ect position
correct for the lock
position for washer.
the lock washer. 12 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
sembling Series F11
embling
Assembling Series F11
Se
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
Assembly
sembly F11
Assembling F11 Series F11
sembly F11
Assembly F11
Assemble F11
Assemble9. Assemble
the valvethe valve plate.
plate. 10. Assemble 10. Assemble
the cylinderthebarrel.
cylinder barr
ke sure9. the
Make
9.
Assemble Assemble
sure
theslot
Assemble the
valve the
isthe
in valve
slot is inplate.
correct
valve plate.
plate. correct
Make sure the Instructions
10. Assemble
10. Assemble10.onAssemble
Instructions
the page
the onthe
18.
cylinder
cylinder page
barrel. cylinder
18. barr
barrel.
Instruc-
slot is in correct position and the valve tions on page 18.
sition Make
position
and
ke sure platethe sure
the slot and
valve the
theslot
valve
plate
is in as
is llocated is
correct in correct
plate is
shown in picture. Instructions Instructions
on page on
18. page 18.
position
llocated
ated and
sition as shown
the valveand
as the
in shown valve
picture.
plate in plate is
is picture.
llocated as
ated as shown in picture. shown in picture.
11. Assemble the O-rings on the distance 12. Carefully tap down the guide spacer
11. ring.
Assemble the O-rings on the
Assemble the O-rings on the 12. housing.
12.toCarefully
the barrel Carefully
tap down tap
thedown
Lubricate with the gu
guide
oil before assembly.
12. The slot on thehousing.
11. Assemble
distance
ance ring.
Assemble ring. theon
the O-rings O-rings
the on the spacer
12.guide to
CarefullytheCarefully
spacertap
spacer must
todown
barrel the tap
thedown
barrel
housing.
be located guide
towards
the gu
distance ring. Lubricate
spacer spacer
with oiltobefore
toLubricate
the barrel the
with barrel
oil housing.
before
assembly.
housing. asse
ance ring. the main ports.
The Lubricate
The
slot on
Lubricate the
with slot on
guide
oil with
the
before oil
spacer before
guide must
assembly. asse
spacer
13 be
ThelocatedThe
be
slot on slot
located
towards
the onthe
guide
Parker the
towardsguide
main
spacer
Hannifin thespacer
main p
ports.
must
Pump & Motor Division Europe
be located towards
be located towards the main ports.
Trollhättan, Sweden the main p
embling
Assembling Series F11
Ser
embling
Assembling Series F11
Ser
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
sembly
Assembly
F11
Assembling F11 Series F11
sembly F11
Assembly F11
Assemble F11
Assemble
13. Assemble
the shims. the Some
shims. Some 14. Lubricate 14. Lubricate
the ball sockets
the ballbefore
sockets be
Assemble
ducts 13. thewithout
13. Assemble
Assemble
products
comes shims.
thethe
comes Some
shims.
shims.
shims,Some Some
without see products 14.
shims, 14.Lubricate
14.
Lubricate
seeassembly. the
the ballball
Lubricate sockets
the
sockets ball
beforebefore
sockets
as- be
assembly.
Assemble Assemble
the pistons.
the pistons
ducts comes
products
re part
spare
comes
listlistforwithout
comes
part
without shims,
more see
without
shims, see shims, seeassembly.
spare part sembly. Assemble
Assemble
assembly. the the pistons.
pistons.
Assemble the pistons
formore
listinformation.
more for
information.information.
re part list for
spare more
part information.
list for more information.
15. Assemble the shaft package with pis- 16. Make sure the timing is correct.
Assemble
15. Assemble
theinshaft
tons to the the
package
shaft
cylinder package
with
barrel. with16. Make16.
sure
Make
the timing
sure theis correct.
timing is co
Assemble
ons in15. thecylinder
pistons
the inshaft
to Assembleto the package
the
barrel.
cylinder with
shaft package
barrel. with16. Make16.
sure the sure
Make timingthe
is timing
correct.is co
ons inpistons
to the cylinder
in to the barrel.
cylinder barrel.
14 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Bulletin MSG30-5511-M1/UK
Assembling
embling ServiceSeries
Manual/Spa
Ser
F11
embling
Assembling Series F11
Ser
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
Assembly
sembly F11
Assembling F11 Series F11
sembly F11
Assembly F11
Assemble F11
17. Carefully
Carefully tap downtap thedown the 18. Lubricate
18. Lubricate the sealing thesurface
sealingon surfa
the
17. Carefully
17.
Carefully Carefully
tap
bearing
ring housing. downtaptap
housing.down
the the bearing
down the hou- 18. 18.theLubricate
Lubricate
shaft
18. Lubricate
shaft before the
before
sealing thethe
sealing
surface
assembling sealing
surface
assembling
on the surfa
on
shaftthe th
sh
seal.
sing. shaft before assembling the shaft seal.
bearing housing.
ring housing. shaft before assembling
shaft before assembling the shaft seal. the sh
19. Carefully push down the shaft seal. Im- 20. Place the back up ring with the radius
19.portant
CarefullyCarefully push
pushtodown thedown
assemble inshaft the shaft
right position. Place20.
20. agains the
the Place
back
dust the
lip onup back
thering up ring
shaftwith
seal. the with
Carefully push down the shaftthe in
al. 19. Carefully
seal.
Important to push
Important to
assemble down
assemble
in shaft radius 20. Place
radius
agains
20. Place the the the
agains
backdust back
the up
dust ring
thetheon
lip onwith
up ring lip with
th
seal. position
right
ht position
al. Important Important to assemble
to assemble in in shaft
radiusseal.radiusseal.
shaft
agains agains
the dust the dust
lip on thelip on th
right
ht position position shaft seal.shaft seal.
15 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Assembling Ser
tin MSG30-5511-M1/UK
embling
Bulletin MSG30-5511-M1/UK Service Manual/Spare PartsF11 Pa
Series
Service Manual/Spare
mbling
Assembling
Bulletin MSG30-5511-M1/UK Series Parts
Service Manual/Spare F11
Series F
Assembly
Assembling
sembly F11 F11 Series F11
embly F11
Assembly F11
Assemble F11 ret
retaining
retaining rin
ring retainin
ring ring
back-up back-
ring
back-up ring
back-up r
21. Carefully
Carefully tapdown
downtap tap down
shaft seal shaft seal 22. Assemble 22. Assemble
the retainingthering.
retaining
Make ring
Carefully
21. tap
Carefully shaft seal
down shaft sealsup-22. Assemble the
22.sure retaining
Assemble ring.
thering. Make
retaining ring. Ma
and
21.
support support
Carefully
ring.
tapring.
down shaft seal and 22. Assemble
surethethe
thethe
chamfer chamfer
retaining
is downwards. is downwards
Make sure
support
andring.
support
port ring. ring. sure thechamfer
sure theisis
chamfer downwards.
chamfer
downwards. is downwards.
23. Assemble the hex. screws and torque 24. Tap down the flat key and turn the
Assemble
23. the
thetohex. screws and 24. Tapshaft
down
24. thethe
Tap flat
down key
the and
flat turn
key the
andthe
turn tu
t
23.Assemble
Assemble Assemble
them hex. thethehex.
screws
specified hex.
value,screws
and onand
screws
shown and24. Tap down24.
at Tap
least oneflat
down key
rev. the
Make and turn
flat
sure key
the and
que them to
torque
pagespecified
them value, value, shaft
17. to specified atback-lash
least
shaft
shaft (see
at least one
at rev.gears
ofleast
onethe Make
one sure
rev.
are the sure th
Make
correct
que them to specified
torque
wn onshown
page 17.
value,
them to specified value, back-lash shaft
ofpage
the17).
at rev.
gears
least Make
one
aregears
correct
sureMake
rev. the sur
(see
own onshown on
page 17. page 17. back-lash
back-lash back-lash of
of the gears the are gears are
correctarecorrect
(see (s
on page 17. page 17).page of the corre
page 17). 17).
page 17).
16 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
n MSG30-5511-M1/UK
Assembling Series F11 Parts
Service Manual/Spare
bling Series F11
Torque
ue
Torque
17 Parker Hannifin
e size "R" mm 17 Parker
Pump Hannifin
& Motor
Pump &Sweden
Trollhättan,
Division Europe
Motor Division Europe
Trollhättan, Sweden
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
Assembling Series F11
One groove
2. When the barrel housing have one Opening barrel retaining ring
groove assemble the cylinder barrel as 3. Assemble the cylinder barrel as shown
shown in picture 3. in picture.
Two grooves
4. When the barrel housing have two Opening barrel retaining ring
grooves assemble the cylinder barrel 5. Assemble the cylinder barrel as shown
as shown in picture 5. in picture.
18 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
M Bi-directional, motor or pump operation G Left hand rotation, mo
S MSG30-5511-M1/UK
Bulletin
BulletinBi-directional,
MSG30-5511-M1/UK Service
motor Manual/Spare
operation, Parts bi-metal
high speed, Service
Service
Manual/Spare
Manual/Spare
Parts
Parts
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
Lplates
Valve
Valve Left
plates hand rotation, pump Series F11
operation Series
Series
F11 F11
Series F11
Valve plates
R Right hand rotation, pump operation
Q
Valve
Valve Bi-directional,
plates
platesF11F11 motor operation, low noise
H Valve plates F11
Bi-directional, motor operation, high pressure
J Right hand rotation, motor operation, internal drain
Type
GType Description
Description
M
Left
Type hand rotation,
M Moperation
r or pump
motor operation, internal drain
Description
Bi-directional, motor or pump operation
M
Bi-directional,
Bi-directional,
motor
motor
or pump
or pumpoperation
operation
r operation,
S S Bi-directional,
S high speed, bi-metal
Bi-directional,Bi-directional,
motor
motor
operation, motor
operation, operation,
highhigh
speed,
speed,high
bi-metalspeed, bi-metal
bi-metal
pumpLoperation
LL LeftLeft
hand hand Left
rotation, hand
rotation,
pump
pumprotation,
operation pump
operation operation
pump R operation
RR Right
Right
handhand
rotation,
rotation,
Rightpumppump
hand operation
operation
rotation, pump operation
r operation, low noise
Q QQ Bi-directional,
Bi-directional,
motor
motor
operation,
operation,
Bi-directional, low low
motor noisenoise low noise
operation,
r operation, high pressuremotor
H HH Bi-directional,
Bi-directional, motor
operation,
operation,
Bi-directional, highhigh
motor pressure
pressure
operation, high pressure
motorJ operation,
JJ Right
motorGoperation, M
Rightinternal
handhand
internal
G LeftLeft
drain
rotation,
rotation,
Rightmotor
drain
motor
hand operation,
operation,
rotation, Q
internal
motor internal
drain
operation, drain
internal drain
S
G hand hand
rotation,
rotation,
Leftmotor
motor
hand operation,
operation,
rotation, internal
motor internal
drain
operation, drain
internal drain
S H R
MMQ QQ
Note!
The internal drained
valve plates G and J is
shown from the back
R
S SH JH H side of the valve plate. L
From the front, when
installed, they looks the
same as the M valve
Note! plate.
Note!
Note!
The internal drained TheTheinternal
internal
drained
drained
valve plates G and J is valve
valve
plates
plates
G andG andJ is J is
LR RJ shown from the back
side of the valve plate. G
JJ
shown
shown
sideside
fromfrom
of the
the the
of the
valve
back
valve
back
plate.
plate.
From the front, when FromFromthe the
front,
front,
when when
19 looks the
installed, they
Parker Hannifin
Note! installed,
installed,
Pump theythey
& Motor looks looks
Division the the
Europe
same as the M valve Trollhättan, Sweden
samesame as the
as the
M valve
M valve
The internal drained valve plates G and J
plate. plate.
plate.
is shown from the back side of the valve
plate.
From the front, when installed, they looks
L LG
the same as the M valve plate.
GG
19 19 19
Parker Hannifin
19 Parker Hannifin Parker
Parker
Hannifin
Pump Hannifin
& Motor Division Europe
Pump & Motor Division Europe PumpPump
&Trollhättan,
Motor
& Motor
Division
Division
Europe
Europe
Trollhättan, Sweden Sweden
Trollhättan,
Trollhättan,
Sweden
Sweden
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
Anti Cavitation valve Series F11
F11
Anti Cavitation valve Series
Motors
Motorswith
withanti-cavitation
anti-cavitationvalvevalve
20 Parker Hannifin
20 Parker
Pump &Hannifin
Motor Division Europe
Pump & Motor
Trollhättan, Division Europe
Sweden
Trollhättan, Sweden
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
Test Procedure Series F11
Test Procedure
MSG30-5520-M1/UK Service Manual
The general condition of the unit can be Series F12 the drain flow for one minu-
Measure
Test Procedure
established by checking the drain flow. te; if it exceeds the maximum figures
Remove the drain line and keep the shown below, the unit is worn or dama-
drain port
The above a suitable
general condition container.
of the unit gedbyinternally
can be established checking theand
drain should be the
flow. Remove replaced
Run thedrain
unitline
atand keep the drain port above a suitable container. Run the unit at 500 rpm and
1000 rpm and pressu- or repaired. Also, check for leakage at
pressurise the system to 200 bar (3000 psi)
rise the system
Measure the todrain
200flow
barfor(3000 psi)if it exceeds
one minute; the the
shaft seal figures
maximum and between
shown below, the
the bearing
unit
and barrel
is worn or damaged internally and should be replaced housings.
or repaired. Also, check for leakage at
the shaft seal and between the bearing and barrel housings.
21 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
Cavitation Series F11
Cavitation
Cavitation marks in the cylinder barrel
bores, on the port side or on the valve
plate depends on air in the oil.
Reasons can be when inlet pressure/
flow isn’t sufficient. Example when
stopping a fan drive and inertia will run
the motor.
Why cavitation?
• Too high speed
• Too low inlet pressure
(pump mode)
What consequence?
• A metallic sound comes from the
system
• Material damage as craters in the
goods which contaminate the
hydraulic system
• Lift off if severe cavitation
• Shaft seal leakage
22 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
Cavitation Series F11
Cavitation
Valve plate with scratched surface.
The damage depends on contaminated
oil due to poor filtration, clogged filter,
previous break down or bad handling
when filling the reservoir.
23 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
Cavitation Series F11
Cavitation
Pistons with the grinding rings intact
have been in a clean system. No over-
speed and good viscosity on the oil.
Note!
High temperature (low viscosity) can be
a reason.
24 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Catalogue MSG30-xxxx/UK Hydraulic motor/pump
Content
Bulletin MSG30-5511-M1/UK Series Service
F10 Manual/Spare Parts
Cavitation Series F11
Contamination / High speed / Oil temperature
Cavitation
Severe damage in cylinder bore at the
pistons turning point.
Severe
Reason is to high damage
speed, in cylinder
the piston is bore
the
thrown out in the pistons turning
pherferie point.
and breaks
Reasonoil
through the protecting is film.
to high speed, the pi
is thrown out in the pherferie an
breaks through the protecting o
film.
High speed
speed wear
wear
Cavitation
Cavitation
25 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Parker Hannifin
3
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
Split view F11 Series F11
492 491
130
110
488
221
486 121
431
222
411
440
310
321
452
460
464
470
474
475
211
233
236
237
26 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
Parts specification F11 Series F11
Parts specification
Item Description
110 Barrel housing
121 Valve Plate (repair kit)
130 Hex Socket Plug Assy
211 Bearing Housing
221 O-Ring (seal kit)
222 O-Ring (seal kit)
233 Shaft Seal (seal kit)
236 Back-up ring (seal kit)
237 Retaining Ring (seal kit)
310 Shaft
321 Key (key kit)
411 Cylinder Barrel Assy (repair kit)
431 Barrel Retaining ring (repair kit)
440 Piston Assy (repair kit)
452 Ring Gear
460 Tap Roller Bearing (bearing kit)
464 Spacer ring (bearing kit)
470 Tap Roller Bearing (bearing kit)
474 Lock washer ( bearing kit)
475 Round nut (bearing kit)
486 Guide spacer
488 Shims (shim kit)
491 Hex Screw (repair kit)
492 Hex Screw (repair kit)
27 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Bulletin MSG30-5511-M1/UK Spare Parts
Spare Parts Series F11 F11-5
28 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Bulletin MSG30-5511-M1/UK Spare Parts
Spare Parts Series F11 F11-6
29 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Bulletin MSG30-5511-M1/UK Spare Parts
Spare Parts Series F11 F11-10
30 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Bulletin MSG30-5511-M1/UK Spare Parts
Spare Parts Series F11 F11-12
31 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Bulletin MSG30-5511-M1/UK Spare Parts
Spare Parts Series F11 F11-14
32 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Bulletin MSG30-5511-M1/UK Spare Parts
Spare Parts Series F11 F11-19
33 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
How to Select F11/12 Spare Parts Series F11
110
488
121
411
430
442
440
F12 — — — — — — —
452
Frame Function Main Mounting Shaft Shaft Version 460Option Option
size ports flange seal number page 77 – 79 page 7
221
61
211
470
478
476
233
34
238 Parker Hannifin
229 Pump & Motor Division Europe
231
Trollhättan, Sweden
Cartridge 225
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
How to Select F11/12 Spare Parts Series F11
The pages we may need to use are the “split view” and the parts list for the parti-
cular motor size. In our example F12-030-MS-SV-T-000-0000-P0, “F12-030”
is the size of the motor, and we need to turn to that particular page.
36 Parker470Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
211 3788317 Bearing Housing Type I 1 Require item 61
211 3788323
Bulletin Bearing Housing Type S
MSG30-5513-M1/UK 1 Require item 61
Service Manual/Spare Parts
Bulletin
211MSG30-5511-M1/UK
MSG30-5513-M1/UK
Spare 3788320
BulletinParts Bearing
Series F12
MSG30-5513-M1/UK Housing Type T 1 Service
Require Split
Spare
Service item Manual/Spare
view
61 F12-30
Parts
Manual/Spare Parts Parts
arts Series 231
HowSpare
F12 3797194
to Select
PartsF11/12
SeriesSeal Carrier
Spare
F12 Parts 1 though F12-125 F12-30
F12-30 Series F11
F12-030 all types from serial
Rotating parts no. 201809300001 and up.
310 Part
F12-030
Pos 3799648
all
Notypes Shaft
fromtype
Description C no. 201809300001
serial 1Qty and up.
Remarks
310 3799638 Housing Shaft typepartsD With two tappered 1
Pos Part No Description 491 roller bearings Qty Remarks
310 3799632 Shaft type K 1 Require flat key
61 Hex Socket
Housing Plug M12*1
parts 1 VSTI12X1EDVITCF
310 3799644 Shaft type P 1 Require flat key
110 3721864 Hex Barrel Housing Assy Type F 1
61
310 3799634 ShaftSocket type SPlug130 M12*1 1
1 VSTI12X1EDVITCF
110
110 3721863 Barrel Housing Assy Type S 1
310 3721864
3799640 Barrel Housing
Shaft type T Assy Type F 1
1 Require flat key
130 3721863 Barrel
110 Hex Socket
Housing PlugAssy
for SType
housing 1 8 HP5ON-S
321 3724437* Flat Key for K and P shaft S 1
1
130
130 Hex Socket Plug for F housing 1 VSTI18X1,5EDVITCF
321 3724449* Hex Flat Socket
Key for Plug for S housing 1
T shaft 110C 1 8 HP5ON-S
211 3784481 Hex
130 Bearing
Socket Housing Type
Plug for F housing 1 1 Require item 61
VSTI18X1,5EDVITCF
430 3724477** Barrel Support 1 Seal kit contain:
211 3784481
211 3788317 Bearing
Bearing Housing
Housing TypeType IC 1
1 Require
Require item
item 61
61
The 211
blue 3788323
452 T in the description
3791927 Ring Gear
Bearing Housingmatches
488Type S our model
1
1 number
O-rings
Require pos:itemF12-030-MS-SV-T-
221,61225, 229
211 3788317 Bearing Housing Type I 1 Require item 61
000-0000-P0 and has partHousing
numberType 3799640 (in green),
Shaft quantity
seal pos: 233 1.
211 3788320
For other
211 Bearing
parts please
3788323 Bearing contact Type T
HousingParker S121 1
Hannifin
1 Require
Require item item 61 61
231 3797194
211 3788320 Bearing Seal Carrier
Seal kitsHousing Type T 411 Require item 61 237, 238
1
1
Retaining rings pos:
In the
231remarks
3797194 (orange text)
Rotating
Seal Carrier we
parts
3793493 Sealing kit type V FPM
have a note that
1 states
Repair“Require
spare part kit Flat Key”. We
Bulletin
can offer
310 that MSG30-5513-M1/UK
part
3799648 to the
Shaft customer,
type C Flat keys must
1 Service
always be Manual/Spare
order with Parts
Minimum
3785132 Rotating
430 3799638 Sealing kitpartstype N NBR contain:
OrderSpare
310 Parts Series F12
Shaft type D 1 F12-30
310Quantity
3799648
3784552 (MOQ)Shaft
Sealingtypekit Ctype S PTFE 1 Valve plate pos: 121
310 3799638
3799632 ShaftShaft type
type K 1 442 flat key
Require
310 3720898 Sealing kit Dtype S SuperCut 1001 Cylinder 440 pos: 411
Barrel
F12-030
310 all
3799644 types from
Shaft
310 3799632 Shaft type K typeserial
P no. 201809300001 1
1 and up.
Require
Require
Pistons pos:
flat
flat
440
key
key (7 pcs)
310 3799634 Repair
Shaft typeSpare
S part Kit 1
310
Pos 3799644
Part No Shaft type P
Description 1Qty Hex
Require
Remarks
Screws flat
pos:key491 (4 pcs)
3721446 Shaft
310 3799634
3799640 Type M type(Motor)
T 1 Require flat key
310 Shaft
Housingtype S
parts 1
3722010 Flat
321 3799640
3724437* TypeKey
S (High
forTK speed Motor)
and P shaft 1 Bearing spare part kit
310
61 310 Shaft
Hex type
Socket Plug M12*1 1
1 Require flat key
VSTI12X1EDVITCF
321 3723977
321 3724437*
3724449* TypeKey
Flat
Flat L (CCW
Key for T
for K pump)
shaft
and P shaft 1
1 contain:
110 3721864
3723978 Flat BarrelRHousing
TypeKey (CW Assy Type F 1
430 3724449*
321
110
3724477**
3721863
Barrel
Barrel for Tpump)
Support
Housing shaft
Assy Type S
1
1
321
1
Seal kit Bearing
Tap Rol contain:pos: 460, 470
452 3724477**
430 3791927 Barrel
Ring Gear
Bearing spare
Support part kit 1
1 O-rings
Spacer pos: 221, 225, 229
476
130
The 452
blue 3791927 Hex Socket Plug
T in the description for S housing
matches 1
our model Seal kit contain:
8number
HP5ON-S F12-030-MS-SV-T-
130 3723971 Bearing
Ring Gear
Hex Socket kit PlugParker
for F housing 1
1 Shaft
O-ringsseal
Retaining pos:pos:
rings 233
221,
VSTI18X1,5EDVITCF pos: 478229
225,
For other parts
000-0000-P0 please
and has partcontact
number 3724449Hannifin
(in green), quantity 1.237, 238
211 3784481 Bearing Shim kitHousing Type C 1 Retaining
Shaft seal
Require rings
pos:
item pos:
233
61
For other Seal kits Shim kit contain:
452parts please
211 3788317
3721330 Bearing
contact Parker Hannifin
Shims kitHousing Type I 1 460Retaining
Require
Shims pos: rings
item pos: 237, 238
61 kit
488part
The shaft 3793493
seal is the Sealing
next kit
item type
to V
be FPM
found. Looking Repair
for spare
it visually in
211 3788323 Seal kitsHousing Type S
Bearing 1 Require
(1 pcs
contain: on 61the “split view”
itemside)
each
3785132
*Kitdetermine
contain Sealing
100 that
pcs, **Kit kit type
typeisN
contain NBR
20 pcs
we can
211 3793493
3788320 the
Sealing
Bearing shaft
kit
Housing item
V Type
FPM Tnumber1 233.Repair
Require spare
itempart61 kit
Valve plate pos: 121
1 221contain:
3784552 Sealing kit kit type S PTFE
231 3785132
3797194 Sealing
Seal Carriertype N NBR
3720898 Sealing kit type Cylinder Barrel pos: 411
for S SuperCut
30 100the 61 Parker Hannifin
We can refer3784552
to theSealing
parts kit listtype SthePTFE
name of Valve plate
part, shaft pos: 121Division
seal itemEurope
233 (red
Rotating parts Pistons
Pump & Motor
pos: 440 (7 pcs)
circle), 3720898 Repair
Sealing Spare
kit type part
S Kit
SuperCut 100 Cylinder Barrel
Trollhättan,pos:
Sweden411
310and look at the
3799648 Shaftparts
type listing
C for the description.
1 Hex211
Screws
3721446 Repair
Type M (Motor)
Spare Pistons pos:pos:
440 491 (4 pcs)
(7 pcs)
310 3799638 Shaft type D part Kit 1
3722010 Type S (High speed Motor) Hex Screws pos: part (4
491 pcs)
Some 310parts are notType
3721446
3799632 soldM
Shaft as(Motor)
type separate
K items and1will Bearing
only bespare
Require available
flat key kitin kits.
3723977
310 3722010
3799644 Type Type L (CCW
ShaftStype
(High pump)
P speed Motor) 1 Requirespare
contain: flat key
Bearing part kit
3723978 Type
310 3723977
3799634 Type L
Shaft Rtype
(CWSpump)
(CCW pump) 1 Tap Rol Bearing pos: 460, 470
contain:
310 3723978
3799640 Type Shaft Rtype
Bearing (CW Tpump)
spare part kit 1 Require
Spacer
Tap Rol pos:
470 flat
Bearing476key
pos: 460, 470
321 3724437* Flat
3723971 Bearing Key kit
Bearing for K and
spare partP shaft
kit 1 Retaining
Spacer pos: rings
476pos: 478
321 3723971
3724449* Bearing
Flat
Shim Key for T shaft
kitkit 1 Retaining rings pos: 478
430 3724477** Barrel Support 1 Shim kit contain:
3721330 Shim Shimskit kit Seal
478 kit contain:
452 3791927 Ring Gear 1 Shims pos:
Shim kitpos: 488
contain:
476 O-rings 221, 225, 229
3721330
*Kit contain Shims
100 pcs, kit contain 20 pcs
**Kit (1 pcs pos:
Shims on each488side)
Shaft
233seal pos: 233
For other parts please contact Parker Hannifin (1 pcs on each
*Kit contain 100 pcs, **Kit
238 contain 20 pcs Retaining rings side)
pos: 237, 238
229 Seal kits 30 Parker Hannifin
231
Pump & Motor Division Europe
Cartridge
3793493 Sealing kit type V FPM30 Repair spare part kit
225 Parker Hannifin
Trollhättan, Sweden
3785132
version Sealing kit type N NBR contain:
Pump & Motor Division Europe
Trollhättan, Sweden
3784552 Sealing kit type S PTFE Valve plate pos: 121
237 Cylinder Barrel pos: 411
3720898 Sealing kit type S SuperCut 100
Repair Spare part Kit Pistons pos: 440 (7 pcs)
3721446 Type M (Motor) Hex Screws pos: 491 (4 pcs)
3722010 37
Type S 2(High speed Motor) Parker Hannifin
Bearing spare
Parker Hannifin part kitDivision Europe
Pump & Motor
3723977 Type L (CCW pump) Pump & Motor Division
contain: Europe
Trollhättan, Sweden
Trollhättan, Sweden
3723978 Type R (CW pump)
310 3799632 Shaft type K 1 Require flat key
310 3799644 Shaft type P 1 Require flat key
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
310 3799634 Shaft type S 1
How310
to Select F11/12
3799640 Spare
Shaft type TParts 1 Require flat key
Series F11
321 3724437* Flat Key for K and P shaft 1
321 3724449* Flat Key for T shaft 1
430 3724477** Barrel Support 1 Seal kit contain:
452 3791927 Ring Gear 1 O-rings pos: 221, 225, 229
Shaft seal pos: 233
For other parts please contact Parker Hannifin
Retaining rings pos: 237, 238
Seal kits
3793493 Sealing kit type V FPM Repair spare part kit
3785132 Sealing kit type N NBR contain:
3784552 Sealing kit type S PTFE Valve plate pos: 121
3720898 Sealing kit type S SuperCut 100 Cylinder Barrel pos: 411
Repair Spare part Kit Pistons pos: 440 (7 pcs)
3721446 Type M (Motor) Hex Screws pos: 491 (4 pcs)
3722010 Type S (High speed Motor) Bearing spare part kit
3723977 Type L (CCW pump) contain:
3723978 Type R (CW pump) Tap Rol Bearing pos: 460, 470
Bearing spare part kit Spacer pos: 476
3723971 Bearing kit Retaining rings pos: 478
Shim kit Shim kit contain:
3721330 Shims kit Shims pos: 488
*Kit contain 100 pcs, **Kit contain 20 pcs (1 pcs on each side)
30 Parker Hannifin
In the Kits section, we need to look at the right to determine which
Pump & Motor parts
Division is required
Europe
Trollhättan, Sweden
based on pos number. In this example we would like to get pos 233, shaft seal. Then
it’s only available in a seal kit and not sold as separate item. Some kits can be sold
with MOQ.
We are looking for a shaft seal item 233, and there appears to be 2 seal kits to
chose between. The model code calls out a V, F12-030-MS-SV-T-000-0000-P0,
and it matches the seal kit with the V so our part number must be 3793493.
If your requested part is not listed in Spare part list, always consult with Parker
Division
38 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
Additional Information Series F11
39 Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Bulletin MSG30-5511-M1/UK Service Manual/Spare Parts
Declaration Series F11
All PMDE products are designed and manufactured considering the basic as well as the
proven safety principles according to:
• ISO 13849-1:2015
• SS-EN ISO 4413:2010
so that the machines in which the products are incorporated meet the essential health
and safety requirements.
Christian Jäger
General Manger
Pump & Motor Division Europe
Offer of Sale
Please contact your Parker representation for a detailed ”Offer of Sale”.