Professional Documents
Culture Documents
Eee 4
Eee 4
Applies to:
L5
DTC
A/F sensor positive current control circuit open
P2237:00
The PCM monitors A/F sensor positive current control circuit voltage. If the voltage
out of the specified value while the engine running, the PCM determines that the
A/F sensor positive current control circuit is open.
https://www.motologic.com/car/2010_mazda6/article/2a0bf0ce6359e746553b5a73a6610880?returnPath=%2Fcar%2F2010_mazda6%2Fsearch%3Fk… 1/4
3/17/2021 DTC P2237:00 [L5] • 2010 Mazda Mazda6 • MotoLogic
POSSIBLE Open circuit in wiring harness between A/F sensor terminal B and PCM terminal
CAUSE 2AD
PCM malfunction
Diagnostic procedure
1 IDENTIFY TRIGGER DTC FOR FREEZE FRAME DATA Yes Go to the next step.
(MODE 2)
No Go to troubleshooting procedures for DTC on
Is the DTC P2237:00 on FREEZE FREEZE FRAME DATA (Mode 2).
FRAME DATA (Mode 2)?
(See DTC TABLE [L5].)
2 VERIFY FREEZE FRAME DATA (MODE 2)/SNAPSHOT Yes Go to the next step.
DATA AND DIAGNOSTIC MONITORING TEST
RESULTS HAVE BEEN RECORDED
https://www.motologic.com/car/2010_mazda6/article/2a0bf0ce6359e746553b5a73a6610880?returnPath=%2Fcar%2F2010_mazda6%2Fsearch%3Fk… 2/4
3/17/2021 DTC P2237:00 [L5] • 2010 Mazda Mazda6 • MotoLogic
Have the FREEZE FRAME DATA No Record the FREEZE FRAME DATA (Mode
(Mode 2)/snapshot data and 2)/snapshot data and DIAGNOSTIC
DIAGNOSTIC MONITORING TEST MONITORING TEST RESULTS on the repair
RESULTS (A/F sensor, HO2S order, then go to the next step.
related) been recorded?
3 VERIFY RELATED REPAIR INFORMATION Yes Perform repair or diagnosis according to the
AVAILABILITY available repair information.
4 INSPECT A/F SENSOR CONNECTOR CONDITION Yes Repair or replace the terminal and/or
connector, then go to Step 8.
Switch the ignition to off.
5 INSPECT PCM CONNECTOR CONDITION Yes Repair or replace the terminal and/or
connector, then go to Step 8.
Disconnect the PCM connector.
6 INSPECT A/F SENOR POSITIVE CURRENT CIRCUIT Yes Go to the next step.
FOR OPEN CIRCUIT
Is there continuity?
7 INSPECT A/F SENSOR Yes Replace the A/F sensor, then go to the next
step.
https://www.motologic.com/car/2010_mazda6/article/2a0bf0ce6359e746553b5a73a6610880?returnPath=%2Fcar%2F2010_mazda6%2Fsearch%3Fk… 3/4
3/17/2021 DTC P2237:00 [L5] • 2010 Mazda Mazda6 • MotoLogic
p
Reconnect the A/F sensor and PCM
connectors.
(See AIR FUEL RATIO (A/F) SENSOR
Inspect the A/F sensor. REMOVAL/INSTALLATION [L5].)
8 VERIFY DTC TROUBLESHOOTING COMPLETED Yes Replace the PCM, then go to the next step.
https://www.motologic.com/car/2010_mazda6/article/2a0bf0ce6359e746553b5a73a6610880?returnPath=%2Fcar%2F2010_mazda6%2Fsearch%3Fk… 4/4