Professional Documents
Culture Documents
BENCHWORK
1st Quarterly Exam
GENERAL DIRECTIONS:
31 The try square is used to measure the 41 The one physical properties of metal is called?
A. Area A. Density
B. Height B. Ductility
C. Length C. Fatigue
D. Square D. Hardness
32 The combination square is used to 42 The type of metal that is considered precious is
A. Set the object at any angle called?
B. Enlarge the size of an object A. Aluminum
C. Minimize the size of an object B. Gold
D. Measure the length of an object C. Nickel
D. Silver
33 What is the tool that measures the inside
and outside diameter and depth of hole and 43 What is the other termed used for mild carbon
slot? steel?
A. Steel tape A. Alloyed metal
B. Try square B. Special metal
C. Micrometer C. Ordinary metal
D. Vernier caliper D. Galvanized metal
34 What is the most commonly used 44 The carbon makes the metal to become
measuring tool of the welder? A. Ductile
A. Steel rule B. Hard
B. Steel tape C. Malleable
C. Pull push rule D. Strong
D. Vernier caliper
45 What are the characteristics of white cast iron?
35 The type of wrench that is used in very little A. hard
space is called? B. Brittle
A. Allen C. Corroded
B. Box end D. Low strength
C. Open end
D. Adjustable 46 The one of the characteristics of tungsten steel
is
36 The type of wrench that has 12 inside notches A. Hard
is called? B. Tables
A. Box end C. Resist strain
B. Combination D. No corrosion
C. Offset
D. Open end 47 What is the one of the characteristics of
copper?
37 What is the type of wrench that can be used A. Very soft
when the size of other wrench is not available? B. Heat resistant
A. Pipe C. Soft and malleable
B. Allen D. Best conductor of electricity
C. Box end
D. Adjustable 48 What is the effect of chromium element to the
metal?
38 What are the two types of special wrenches? A. Tough
A. Allen and bristo B. Ductile
B. Pipe and adjustable C. Extremely strong
C. Open end and box end D. Resistant to corrosion
D. Adjustable and combination
49 The molybdenum makes the metal to become
A. Hard and strong
B. Extremely strong
C. Improved ductility
D. Resist to corrosion