Professional Documents
Culture Documents
Sheriguda(V), Ibrahimpatnam(M), R.R. Dt. Hyderabad, Telangana 501510 8. The Hartley oscillator is less preferred than due to Colpitts
Dept : EEE (2022-2023) Semester : B.Tech II Year (Sem-I)
oscillator’s performance in ___________________ [ ]
a) All frequency region b) Mid frequency region
Subject: ANALOG ELECTRONICS Mid-2 SET-1 c) High frequency region d) Low frequency region
1. Which of these doesn’t refer to a series-shunt feedback? [ ] 10. Which of the following amplifier is less efficient than others?[ ]
a) Voltage in and Voltage out b) Current in and Voltage out a) Class A b) Class B c) Class C d) Class AB
c) Voltage Controlled Voltage Source d) Series voltage feedback
Fill in the blanks
2. In which network is the unit of the feedback factor Ω? [ ]
a) Shunt-shunt feedback b) Shunt-series feedback 11. Frequency of oscillation for three section RC phase shift network is
c) Series-series feedback d) Series-shunt feedback given by ___________________
3. In an ideal op-amp, which is not true? [ ] 12. How many inductors are there in the tank circuit? ____________
a) Open loop voltage gain is infinite b) Input resistance is infinite
c) Slew rate is infinite d) CMRR is zero 13. Till what frequency do we get amplification from IC 741?_________
4. RC phase shift oscillators contain a minimum of _________ Phase 14. The output of a stable oscillator have ________________________
shift network. __________ [ ] 15. How do we obtain sinusoidal output out of a class B amplifier?
a) 1 b) 2 c) 3 d) 4 _____________________________
16. What is the a theoretical efficiency of class B amplifier ________
17. The unwanted characteristics of amplifier output apart from the
5. The Hartley oscillator is less preferred than due to Colpitts desired output is collectively termed as _____________________
oscillator’s performance in ___________________ [ ]
a) All frequency region b) Mid frequency region 18.The current flowing into one input of the op-amp is 12nA and it is 10
c) High frequency region d) Low frequency region nA in the other. Find the input offset current. ______________
19.Which configuration of the transistor amplifier is used for Hartley
6. Oscillator _______an AC input for giving an AC output. [ ] oscillator? ____________________________________
a) Doesn’t need b) Need c) Doesn’t need at lower frequencies 20. Phase shift provided by the overall tank circuit in Hartley oscillator is
d) Doesn’t need at higher frequencies _______________
SREE DATTHA INSTITUTE OF ENGINEERING AND SCIENCES
Sheriguda(V), Ibrahimpatnam(M), R.R. Dt. Hyderabad, Telangana 501510 8. Which of the following amplifier is less efficient than others?[ ]
Dept : EEE (2022-2023) Semester : B.Tech II Year (Sem-I)
a) Class A b) Class B c) Class C d) Class AB
Subject: ANALOG ELECTRONICS Mid-2 SET-3 9. Which of these doesn’t refer to a series-shunt feedback? [ ]
a) Voltage in and Voltage out b) Current in and Voltage out
Name: ____________________________ H.T.No:_________________________
c) Voltage Controlled Voltage Source d) Series voltage feedback
Answer all the Questions Marks (20* 0.5=10)
10. In which network is the unit of the feedback factor Ω? [ ]
Multiple Choice a) Shunt-shunt feedback b) Shunt-series feedback
c) Series-series feedback d) Series-shunt feedback
1. In an ideal op-amp, which is not true? [ ]
a) Open loop voltage gain is infinite b) Input resistance is infinite
Fill in the blanks
c) Slew rate is infinite d) CMRR is zero
2. RC phase shift oscillators contain a minimum of _________ Phase 11. Till what frequency do we get amplification from IC 741?_________
shift network. __________ [ ]
a) 1 b) 2 c) 3 d) 4 12. The output of a stable oscillator have ________________________
13. How do we obtain sinusoidal output out of a class B amplifier?
3. The Hartley oscillator is less preferred than due to Colpitts _____________________________
oscillator’s performance in ___________________ [ ]
a) All frequency region b) Mid frequency region 14. What is the a theoretical efficiency of class B amplifier ________
c) High frequency region d) Low frequency region 15. The unwanted characteristics of amplifier output apart from the
desired output is collectively termed as _____________________
4. Oscillator _______an AC input for giving an AC output. [ ]
16.The current flowing into one input of the op-amp is 12nA and it is 10
a) Doesn’t need b) Need c) Doesn’t need at lower frequencies
nA in the other. Find the input offset current. ______________
d) Doesn’t need at higher frequencies
17.Which configuration of the transistor amplifier is used for Hartley
5. The output of oscillator will not depend upon ________ [ ]
oscillator? ____________________________________
a) Feedback b) Amplifier c) Both feedback and amplifier
d) Input voltage
18.Phase shift provided by the overall tank circuit in Hartley oscillator is
_________
6. Which of the following amplifier class have the highest linearity and
lowest distortion? [ ]
19. Frequency of oscillation for three section RC phase shift network is
a) Class A b) Class B c) Class C d) Class B push-pull
given by ___________________
7. Which of the following amplifier is most suited for making tuning
20.How many inductors are there in the tank circuit? ____________
circuits? [ ]
a) Class A b) Class B c) Class C d) Class D
SREE DATTHA INSTITUTE OF ENGINEERING AND SCIENCES 8. In which network is the unit of the feedback factor Ω? [ ]
Sheriguda(V), Ibrahimpatnam(M), R.R. Dt. Hyderabad, Telangana 501510 a) Shunt-shunt feedback b) Shunt-series feedback
Dept : EEE (2022-2023) Semester : B.Tech II Year (Sem-I)
c) Series-series feedback d) Series-shunt feedback
Subject: ANALOG ELECTRONICS Mid-2 SET-4 9. In an ideal op-amp, which is not true? [ ]
a) Open loop voltage gain is infinite b) Input resistance is infinite
Name: ____________________________ H.T.No:_________________________ c) Slew rate is infinite d) CMRR is zero
Answer all the Questions Marks (20* 0.5=10)
10. RC phase shift oscillators contain a minimum of _________ Phase
Multiple Choice shift network. __________ [ ]
a) 1 b) 2 c) 3 d) 4
1. The Hartley oscillator is less preferred than due to Colpitts
oscillator’s performance in ___________________ [ ]
a) All frequency region b) Mid frequency region Fill in the blanks
c) High frequency region d) Low frequency region
11. How do we obtain sinusoidal output out of a class B amplifier?
2. Oscillator _______an AC input for giving an AC output. [ ] _____________________________
a) Doesn’t need b) Need c) Doesn’t need at lower frequencies 12. What is the a theoretical efficiency of class B amplifier ________
d) Doesn’t need at higher frequencies
13. The unwanted characteristics of amplifier output apart from the
3. The output of oscillator will not depend upon ________ [ ] desired output is collectively termed as _____________________
14. The current flowing into one input of the op-amp is 12nA and it is 10
a) Feedback b) Amplifier c) Both feedback and amplifier
nA in the other. Find the input offset current. ______________
d) Input voltage
15. Which configuration of the transistor amplifier is used for Hartley
4. Which of the following amplifier class have the highest linearity and
oscillator? ____________________________________
lowest distortion? [ ]
a) Class A b) Class B c) Class C d) Class B push-pull
16. Phase shift provided by the overall tank circuit in Hartley oscillator is
_________
5. Which of the following amplifier is most suited for making tuning
circuits? [ ]
17. Frequency of oscillation for three section RC phase shift network is
a) Class A b) Class B c) Class C d) Class D
given by ___________________
6. Which of the following amplifier is less efficient than others?[ ]
18. How many inductors are there in the tank circuit? ____________
a) Class A b) Class B c) Class C d) Class AB
19.Till what frequency do we get amplification from IC 741?_________
7. Which of these doesn’t refer to a series-shunt feedback? [ ]
a) Voltage in and Voltage out b) Current in and Voltage out
20. The output of a stable oscillator have ________________________
c) Voltage Controlled Voltage Source d) Series voltage feedback