Professional Documents
Culture Documents
(b) Finish : Pre-treated (Seven Tank Process), Oven Dried and Epoxy Coated
(e) EDGE BENDING:-Teak wood or PVC lipping. (Teak :-6mm thick applied with fevicol and naols.)
( PVC :- Minimum 1.60mm thick applied with hot glue. Under 200ْ C heat.)
(f) JOINTING:_ All wooden parts to be joined with Tongue /Glove method by providing a coat
of wood primer and proper grinding with emery paper to smoothen the surface
and then covering the surface with spirit coat or varnish.
(g) TREATMENT:-All wooden parts/ Block Boards shall be given Anti- Termite /Borer
treatment
LIST OF RECOMMENDED MANUFACTURES FOR HOSPITAL FURNITURE
MEDICAL POINT Medical Point Pvt (India) Ltd 58/10, 2nd floor,
Ashok Nagar New Delhi -110021
OVEN DRYING
Removal of traces of Moisture
entrapped in crystalline spaces
RUB- 04
7 SHOES ROUND 11/4 BER
6 HANDLE M.S 01
HOSPITAL FURNITURE
BED STEAD IRON HOSPITAL
DATE:- SHT
1980 NO
SubMaj A E-IN-C’s BR
1/2
Francis ARMY HQ
DRAWN BY
OVER ALL DESCRIPTION Two section, Mechanically operated, fixed height with back rest adjustment
RAW MATERIAL Tubular Mild & Machine pressed steel of CRCA quality.
S.steel-----SAIL(SALEM)
MAIN FRAME Strong and sturdy frame of mild steel with perforated 2 section top of 18 SWG (1.25mm)
thickness and Corner buffers.
HEAD & FOOT BOWS- Both side pre-laminated particle Board of 20 mm thickness. Panels
framed in 31mm dia detachable .350mm high stainless steel Head and Foot bows.
BACK REST Handle wound lever operated backrest at foot end. . Handle to fold inwards when not in use.
Range 0-80 deg.
BASE Non trolley type base on legs with casters or on Rubber feet. Tubular steel with 32 mm dia.
FINISH Pre-treated (7 stages) with Epoxy powder coated BED STEAD IRON HOSPITAL
oven backed DATE:- SHT
NO
SubMaj A Francis E-IN-C’s BR
COLOUR Ivory white/white/Warm Grey DRAWN BY ARMY HQ
2/2
ATTACHMENTS One Epoxy coated IV Rod with 4 IV Rod location Smt Surjit Kaur,CD
CHECKED BY DRG. NO. HFD/ 2001
points and mosquito net rods.
4 BRAKE(HI-LO) M.S 01
3 BRAKE M.S 01
(TRENDELENBERG)
MECHANISM OF ACTION Handle wound with two separate levers or screws to maneuver the back rest and knee rest.
Height adjustment mechanically by handle.Trendelenberg adjustment on Gas spring.
RAW MATERIAL Tubular Mild & Machine pressed steel of CRCA quality.
S.steel-----SAIL(SALEM)
MAIN FRAME 50x30mm rectangular pipe of 16 swg (1.63mm) with perforated mild steel top of
18swg (1.25mm) thickness Provided with 4 corner buffers.
.HEAD & FOOT BOWS Both side prelaminated particle Board of 20 mm thickness. Panels framed in 31mm dia
detachable 350mm high stainless steel Head & Foot bows.
BACK & KNEE REST Back raise 0-80 deg. Knee raise Range 0-45 deg. Trendelenberg and RT upto+-15 Deg.
Height:-620-825mm
HOSPITAL FURNITURE
BASE Trolley type base 15 mmx30mm rectangular pipe
BED STEAD FOWLER- ICU
of 18 swg (1.63mm) and 32 mm dia.
DATE:- SHT
NO
CASTORS 100 mm dia castors with brakes on opposite corners SubMaj A Francis E-IN-C’s BR
2/2
DRAWN BY ARMY HQ
SIDE RAILINGS Collapsible railings of stainless steel of 16 swg Smt Surjit Kaur,CD
CHECKED BY DRG. NO. HFD/ 2002
FINISH Pre-treated (7 stages) with Epoxy powder coated
oven backed
3 CASTOR 100
Ø/BRACKET 2 NOS 04
2 H TYPE LEG M.S 02
1 MAIN FRAME M.S 01
SR OBJECT AND SIZE MATL QTY
NO
HOSPITAL FURNITURE
BED STEAD FOWLER
DATE:- SHT
NO
SubMaj A Francis E-IN-C’s BR
1/2
DRAWN BY ARMY HQ
OVER ALL DESCRIPTION Four section, Mechanically operated by four levers to obtain desired position like Back
Rest, Knee rest, Trendelenberg and revere Tredelenberg positions. Fixed height, two way
longitudinal tilt
MECHANISM OF ACTION Handle wound with two separate screws for back & knee rest. Trendelenberg/reverse
Trendelenberge adjustments on gas spring up to ± 15 deg.
RAW MATERIAL Tubular Mild & Machine pressed steel of CRCA quality. S-steel :- SAIL (Salem)16 swg
MAIN FRAME 50x30 mm Rectangular pipe of 16 SWG (1.63 mm) with perforated mild steel sheet top of
18 SWG (1.25 mm) thickness provided with 4 corners buffers
HEAD & FOOT BOWS Both side pre laminated particle Board of 20 mm thickness. Panels framed in
31mm dia detachable 350mm high stainless steel Head &Foot bows.
BACK & KNEE REST Handle wound lever operated backrest at foot end.. Handle to fold inwards
when not in use. Head Raise Range 0-80. Knee raise Range 0-45 deg.
Trendelenberg and RT upto+-15 Deg.
HOSPITAL FURNITURE
Height:-620-825mm
BED STEAD FOWLER
BASE Non trolley type base on legs of 32 mm dia DATE:- SHT
with castors SubMaj A Francis E-IN-C’s BR NO
2/2
DRAWN BY ARMY HQ
CASTORS 100 mm dia castors with brakes on opposite sides..
Smt Surjit Kaur,CD
CHECKED BY DRG. NO. HFD/ 2003
FINISH Pre-treated (7 stages) with Epoxy
powder coated oven backed
HOSPITAL FURNITURE
BED STEAD ORTHOPEDIC
DATE:- SHT
NO
SubMaj A Francis E-IN-C’s BR
2/3
DRAWN BY ARMY HQ
MECHANISM OF ACTION Handle wound with two separate levers or screws for maneuver the back rest
and knee rest. Height adjustment mechanically by handle. Trendelenberg adjustment on
Gas spring. Hydraulic operated height adjustment 485 mm to 710 mm
RAW MATERIAL Tubular Mild & Machine pressed steel of CRCA quality.S.steel----SAIL(SALEM)
MAIN FRAME Trolley Type,50x30 mm Rectangular pipe of 16 SWG (1.63 mm) with
perforated mild steel sheet top of 18 SWG (1.25 mm) thickness provided with 4
corners buffers.
HEAD & FOOT BOWS Head & foot and are detachable and can be used inter changeably according
to where treatment is applied
BACK & KNEE REST Handle wound lever operated backrest at foot end. Handle. Handle to fold
inwards when not in use. Head Raise Range 0-80. Knee raise Range 0-45 deg.
Trendelenberg and RT upto+-15 Deg. Height:-620-825mm
BASE Trolley type base 15 mm x 30 mm Rectangular pipe of 18 SWG (1.63 mm).
CASTORS Whole structured mounted or 150 mm x 400 mm super quality castors two with
bricks and two without brakes.
SIDE RAILING Collapsible railing made of stainless steel heavy HOSPITAL FURNITURE
gauge tubular steel. BED STEAD ORTHOPEDIC
FINISH Pre-treated (7 stages) with Epoxy powder coated DATE:- SHT
oven backed NO
SubMaj A Francis E-IN-C’s BR
COLOUR Ivory white/white/Warm Grey DRAWN BY ARMY HQ
1/3
HOSPITAL FURNITURE
OVER ALL DESCRIPTION Three/Two Mechanically operated by four levers to obtain desired position like
Back Rest, Knee rest, Trendelenberg and Reverse Trendelenberg positions, ,
Fixed height.
MECHANISM OF ACTION Handle wound with two separate levers or screws for maneuver the back rest
and knee rest. Trendelenberg adjustment on Gas spring.
RAW MATERIAL Tubular Mild & Machine pressed steel of CRCA quality.
S.steel-----SAIL(SALEM)
MAIN FRAME 50x30 mm Rectangular pipe of 16 SWG (1.63 mm) with perorated mild steel
sheet top of 18 SWG (1.25 mm) thickness provided with 4 corners buffers
HEAD & FOOT BOWS Head & foot and are detachable epoxy coated or of stainless steel
fitted with colourful railings (7 railings/vertical support)
BACK & KNEE REST Handle wound lever operated backrest at foot end. Handle to fold inwards
when not in use. Range Of head raise :-0-80. Knee raise Range 0-45 deg.
Trendelenberg and RT upto+-15 Deg. Height:-620-825mm
BASE Non trolley type base on legs of 32 mm dia with castors
CASTORS 100 mm dia castors with brakes on HOSPITAL FURNITURE
opposite sides .
BED STEAD PAEDIATRIC
RAILING Collapsible railing made of stainless steel
DATE:- SHT
heavy gauge tubular steel. The height of NO
SubMaj A Francis E-IN-C’s BR
the side rails should be adjustable DRAWN BY ARMY HQ
2/2
MAIN FRAME:- Machine pressed, 3 side covered having one drawer and box 7 Superimposed Top S.S 01
Top: Superimposed stainless steel top with 2 cm raised edges on three 24 GA
sides 6 Plywood 406 x 406 Plywood 01
x 72 mm thick
CASTORS 50 mm dia with the locking facility and rear end buffers
5 Drawer 20 GA MS 01
FINISH Pre-treated (7 stages) with Epoxy powder coated oven backed
4 Cam Lock with Key Brass 01
COLOUR Ivory white/white/Warm Grey 3 Door 20 GA MS 01
HOSPITAL FURNITURE
TABLE BED SIDE TYPE-I
DATE:- SHT
820
NO
SubMaj A Francis E-IN-C’s BR
1/2
DRAWN BY ARMY HQ
RAW MATERIAL Tubular and Machine pressed Mild steel of CRCA quality, with press
bent angles and channels of 18 SWG
MAIN FRAME Machine pressed mild steel sheet box with door having ventilation
5 SUPERIMPOSED S.S 01
louvers and self locking latch mounted on square legs.
TOP
Top:- Stainless steel top with raised edges of 2 cm on 3 sides 4 FRAME TUB. WITH M.S 01
CABINET
LEGS Tubular steel with rubber feet
3 KNOB WITH BLANK BRA- 01
FINISH : Retreated (7 stages) with Epoxy powder coated oven backed SS
HOSPITAL FURNITURE
TABLE BED SIDE TYPE-II
DATE:- SHT
NO
SubMaj A Francis E-IN-C’s BR 2/2
DRAWN BY
ARMY HQ
Smt Surjit Kaur,CD
CHECKED BY
DRG. NO. HFD/ 2006
HOSPITAL FURNITURE
TABLE INVALID
DATE:- SHT
NO
SubMaj A Francis E-IN-C’s BR
1/1
DRAWN BY ARMY HQ
MAIN FRAME Frame work of Mild steel of CRCA quality of 22 dia press bent angles mounted on four rubber shoes.
TOP Upholstered 35 cms dia top fitted with strong and accurate machine screw
BACK REST Backrest of CRCA, mild steel, fitted to the main frame at a height of 12” from the top
HOSPITAL FURNITURE
STOOL STEEL WITH BACKREST
DATE:- SHT
NO
SubMaj A Francis E-IN-C’s BR
1/1
DRAWN BY ARMY HQ
HOSPITAL FURNITURE
SINGLE STEP STOOL
DATE:- SHT
NO
SubMaj A Francis E-IN-C’s BR
1/2
DRAWN BY ARMY HQ
2 FLAT AL.TR 30 mm W AL 06
HOSPITAL FURNITURE
TWO TIER STOOL
DATE:- SHT
NO
SubMaj A Francis E-IN-C’s BR
2/2
DRAWN BY ARMY HQ
MAINFRAME 25mm Dia, Tubular steels used for stand and 32 mm Dia tubular steel is used
for cradle.
4 CASTOR 100Ø x 28 04
BASE On four rubber stamps/100 mm dia castors. laminated Bottom Shelf with drawer
for storage. 3 CRIB M.S 01
FINISH Pretreated with 7 tank process & Epoxy Power coated. 2 SUPPORT TUBE M.S 04
1 SIDE FRAME M.S 02
COLOUR Bars :- CRIB bars in bright colours (Blue, Pink, Yellow)
SR OBJECT AND SIZE MTL QTY
Frame :- Light Pink, Light Blue. NO
HOSPITAL FURNITURE
BABY CRADLE
DATE:- SHT
NO
SubMaj A Francis E-IN-C’s BR
1/1
DRAWN BY ARMY HQ
RAW MATERIAL Tubular steel and mild steel of CRCA quality with cushioned seat and back
and fixed head rest.
MAIN FRAME Tubular Mild steel construction fitted with polyurethane cushioned seat and back and fixed arm rests.
TYRES :Solid puncture proof rubber tyres of 65 Cm dia .Wheels fitted with self propelling loops and brake
arrangement. Front with 15cms solid castors.
CASTORS Two swivel castors of 200mm dia in front.
HOSPITAL FURNITURE
INVALID CHAIR NON FOLDING
DATE:- SHT
NO
SubMaj A Francis E-IN-C’s BR
1/1
DRAWN BY ARMY HQ
OVERALL DESCRIPTION : 45 cms padded seat with detachable arm-rest. Front with 15 cms
solid castors and rear with 65 cms solid wheels With brakes.
HOSPITAL FURNITURE
INVALID WHEEL CHAIR (FOLDING)
DATE:- SHT
NO
SubMaj A Francis E-IN-C’s BR
1/2
DRAWN BY ARMY HQ
RAW MATERIAL Tubular steel and mild steel of CRCA quality with cushioned seat and back
and fixed head rest.
MAIN FRAME Tubular Mild steel construction fitted with polyurethane cushioned seat and back and fixed arm rests.
TYRES :Solid puncture proof rubber tyres of 65 Cm dia .Wheels fitted with
self propelling loops and brake arrangement. Front
with 15cms solid castors.
COLOUR Upholstery :- Mauve ,Light, blue, Lemon Yellow. BODY :- Ivory white
HOSPITAL FURNITURE
INVALID WHEEL CHAIR PAEDIATRIC
DATE:- SHT
NO
SubMaj A Francis E-IN-C’s BR
1/1
DRAWN BY ARMY HQ
935
Smt Surjit Kaur,CD
Ǿ 540
Ǿ 630
OVERALL DESCRIPION
Frame 100 mm dia castors of stainless steel
fitted with coloured plastic container with lid
4 CASTOR 100 Ø 03
1 FRAME S.S 01
HOSPITAL FURNITURE
SOILED LINEN TROLLEY
DATE:- SHT
NO
SubMaj A Francis E-IN-C’s BR 1/1
DRAWN BY
ARMY HQ
Smt Surjit Kaur,CD
CHECKED BY
DRG. NO. HFD/ 2014