Professional Documents
Culture Documents
Chapter 1 - Principle of Fluids
Chapter 1 - Principle of Fluids
(BFC 10403)
CHAPTER 1
PRINCIPLE OF FLUIDS
ZARINA MD. ALI & TAN LAI WAI
UTHM
1
SYLLABUS
2
1.0 Introduction
3
1.0 Introduction
Cont’d
Fluid engineering applications is enormours; which
are flow in pipelines and channels, movements of air
and blood in the body, air resistance, wind loading
on buildings, motion of projectiles, jets, shock waves,
lubrication, combustion and irrigation.
The knowledge of fluid mechanics and hydraulics is
required to properly design water supply systems,
wastewater treatment facilities, spillways, pumps,
turbines, air conditioning systems and etc.
4
1.1 Units and Dimension
Quantity Dimension SI BG
Mass M kg lb
Length L m ft
Time T s s
Temperature θ oC oF
Vapor / gas
- Compressible fluid.
- Density of gas/vapor is different based on
temperature and pressure required.
7
1.2 Ideal & Newtonian Fluid
Cont’d
Ideal Fluid
Known as perfect fluid
This fluid has no friction, surface tension and
compressiblity.
Although this fluid does not exist in reality, a lot
of researchers used it in analysis and calculation
of fluid.
8
1.2 Ideal & Newtonian Fluid
Cont’d
Real Fluid
In real fluid, either liquid or gas, tangential or
shearing forces always develop whenever there is
motion relative to a body, thus creating fluid friction.
Newtonian fluid is a fluid for which the constant of
proportionality (where, shear stress proportional to
the time rate of (angular) deformation) does not
change with rate of deformation.
9
1.2 Ideal & Newtonian Fluid
Cont’d
Real Fluid
Water, air, gasoline, and oils (Newtonian fluids)
Blood and liquid plastics (non-Newtonian fluids)
10
1.3 Properties of Fluid
Cont’d
Density ()
Depends on temperature and pressure
Density = mass per unit volume or = m/V
SI Unit = kg/m3.
Example: density of water = 998 kg/m3 ≈ 1000
kg/m3
11
1.3 Properties of Fluid
Cont’d
13
1.3 Properties of Fluid
Cont’d
15
1.3 Properties of Fluid
Cont’d
Answer 1:
16
1.3 Properties of Fluid
Cont’d
17
1.3 Properties of Fluid
Cont’d
Example 2 :
If the specific volume of a certain gas is 0.73 m3/kg,
calculate its specific weight.
Answer 2 :
vs = 0.73 m3/kg ρ = 1/vs = 1/0.73 =1.37 kg/m3
= g = 1.37 x 9.81 = 13.44 N/m3
18
1.3 Properties of Fluid
Cont’d
Dynamic Viscosity
is a property that represents the
internal resistance of a fluid to
motion or the “fluidity”.
The force a flowing fluid exerts
on a body in the flow direction is
called the drag force, and the
magnitude of this force depends
on viscosity. 19
1.3 Properties of Fluid
Cont’d
Viscosity
To obtain a relation for viscosity,
consider a fluid layer between
two very large parallel plates (or
equivalently, two parallel plates
immersed in a large body of a
fluid) separated by a distance.
20
1.3 Properties of Fluid
Cont’d
Viscosity
Now a constant parallel force F is applied to the
upper plate while the lower plate is held fixed. After
the initial transients, it is observed that the upper
plate moves continuously under the influence of
this force at a constant velocity V.
The fluid in contact with the upper plate sticks to
the plate surface and moves with it at the same
velocity. 21
1.3 Properties of Fluid
Cont’d
Viscosity
Force which are needed to make a constant flow is
Au where is dynamic viscosity,
F
y F/A shear stress
u y shear stress rate
The shear stress acting on this fluid layer is ( = F/A)
where A is the contact area between the plate and the
fluid. Note that the fluid layer deforms continuously
under the influence of shear stress.
22
1.3 Properties of Fluid
Cont’d
du
The shear stress can also shows as
dy
23
1.3 Properties of Fluid
Cont’d
24
1.3 Properties of Fluid
Cont’d
Example 3 :
A plate separated by 0.5 mm from a fixed plate
moves at 0.5 m/s under a force per unit area of 4.0
N/m2. Determine the viscosity of fluid between the
plates.
25
1.3 Properties of Fluid
Cont’d
Answer 3 : 0.5 m/s
du
dy
4.0 N/m2 0.0005 m
dy 0.5
(4.0) 0.004 Ns / m2
du 0.0005
26
1.3 Properties of Fluid
Cont’d
28
1.3 Properties of Fluid
Cont’d
29
1.3 Properties of Fluid
Cont’d
Example 4 :
A liquid compressed in a cylinder has a volume of
1000 cm3 at 1 MN/m2 and a volume of 995 cm3 at 2
MN/m2. What is its bulk modulus of elasticity (K)?
Answer 4:
dp 2 1
K 200MPa
dV V (995 1000) /1000
30
31
1.3 Properties of Fluid
Cont’d
This force acts in the plane of the surface, normal to
any line drawn in the surface and its tends to
reduce the surface area of liquid body.
Effect of surface tension is to reduce the liquid area
to minimum level and increase the internal forces
thus, surface tension force must be in equilibrium.
= 0.073 N/m – for air-water interface
= 0.480 N/m – for air -mercury interface
32
1.3 Properties of Fluid
Cont’d
Unit : N/m
For interior of liquid cylinder, P
R
2
A spherical droplet, P
R
36
1.3 Properties of Fluid
Cont’d
Increasing of liquid’s level in tube can be estimated
if angle,which is between wall and liquid are
known. Here is the formulae; 2 cos
h
r
dimana: - angle
- specific weight
- surface tension
r - radius
37
1.3 Properties of Fluid
Cont’d
Example 6 :
Find the capillary rise in the tube for a mercury-air-
glass interface with 130oC if the tube radius is 1mm
and the temperature is 20oC.
Answer 6 :
2 cos 2(0.514)(cos130 o )
h 0.005m
r (13570 )(9.81)(1 / 1000 )
38
Appendix
Next slides show the properties of air, water and
common gases at standard sea-level atmosphere
pressure.
39
1.3 Properties of Fluid (Appendix)
Table A.1: Properties of air at standard sea-level
atmosphere pressure Cont’d
Specific Dynamic Kinematic
Temperature Density,
oC weight, viscosity, Viscosity,
kg/m3
N/m3 Ns/m2 m2/s
0 1.29 12.7 1.72 10-5 13.3 10-6
10 1.25 12.2 1.77 10-5 14.2 10-6
20 1.20 11.8 1.81 10-5 15.1 10-6
30 1.16 11.4 1.86 10-5 16.0 10-6
40 1.13 11.0 1.91 10-5 16.9 10-6
50 1.09 10.7 1.95 10-5 17.9 10-6
60 1.06 10.4 1.99 10-5 18.9 10-6
70 1.03 10.1 2.04 10-5 19.9 10-6
80 1.00 9.80 2.09 10-5 20.9 10-6
90 0.972 9.53 2.19 10-5 21.9 10-6
100 0.946 9.28 2.30 10-5 23.0 10-6 40
1.3 Properties of Fluid (Appendix)
Table A.2: Properties of water at standard sea-level
atmosphere pressure Cont’d
Temperature Density, Specific weight, Dynamic viscosity, Surface tension*,
oC kg/m3 N/m3 Ns/m2 N/m
0 1000 9810 1.75 10-3 0.0756
10 1000 9810 1.30 10-3 0.0742
20 998 9790 1.02 10-3 0.0728 * Contact
with air
30 996 9770 8.00 10-4 0.0712
40 992 9730 6.51 10-4 0.0696
50 988 9690 5.41 10-4 0.0679
60 984 9650 4.60 10-4 0.0662
70 978 9590 4.02 10-4 0.0644
80 971 9530 3.50 10-4 0.0626
90 965 9470 3.11 10-4 0.0608
41
100 958 9400 2.82 10-4 0.0589
1.3 Properties of Fluid (Appendix)
Table A.3: Properties of fluid at standard sea-level
atmosphere pressure Cont’d
Bulk
Density, Specific Viscosity,
Temp Surface Modulus,
gravity, sg
Fluid tension, K
oC 10– 3
kg/m3 – N/m 106 N/m2
Ns/m2
Benzene 20oC 876 0.88 0.65 0.029 1030
Tetrachloride
20oC 1588 1.594 0.97 0.026 1100
Carbon
Raw oil 20oC 856 0.86 7.2 0.03 –
Gasoline 20oC 680 0.68 0.29 – –
Glycerine 20oC 1258 1.26 1494 0.063 4344
–
Hydrogen 73.7 0.074 0.021 0.0029 –
257oC
42
1.3 Properties of Fluid (Appendix)
Table A.3: Properties of fluid at standard sea-level
atmosphere pressure Cont’d
Specific Surface Bulk
Density viscosity
Temp weight, tension, Modulus,
, ,
Fluid sg K
oC 10– 3
kg/m3 – N/m 106N/m2
Ns/m2
Kerosene 20oC 808 0.81 1.92 0.025 –
Mercury 20oC 13550 13.56 1.56 0.51 26200
Oxygen –195oC 1206 1.21 0.278 0.015 –
SAE 10 oil 20oC 918 0.92 82 0.037 –
SAE 30 oil 20oC 918 0.92 440 0.036 –
Water 20oC 998 0.999 1.00 0.073 2171
Sea water 20oC 1023 1.024 1.07 0.073 2300
43
1.3 Properties of Fluid (Appendix)
Table A.4: Physical properties of common gases at standard
sea-level atmosphere pressure Cont’d
Chemical Molar Mass, Density, Viscosity,
Gas Constant, R
Gas formula M