Professional Documents
Culture Documents
Fig. 1
2. Assuming that the diodes in the circuits of Fig. 2 are ideal,
find the values of the labeled currents and voltages.
Fig.2
3. In the circuit shown in Fig. 3, D1 has 10 times the junction
area of D2. What value of V results? To obtain a value for V
of 50 mV, what current I2 is needed?
Fig.3
4. Determine the peak and average power delivered to RL in
Figure 4.
Fig. 4
5. For the fig 5.
a- Find the peak voltage across each half of the secondary.
b- Sketch the voltage waveform across RL.
c- What is the peak current through each diode?
d- What is the PIV for each diode?
Fig. 5
6. Sketch vo for the networks in fig. 7 and find
(a) (b)
Fig .6
7. What value of filter capacitor is required to produce a 1% ripple
factor for a full-wave rectifier having a load resistance of
Assume the rectifier produces a peak output of 18 V.
8. a) Determine the peak-to-peak ripple and dc output voltages in
Figure 7. The transformer has a 36 V rms secondary voltage
rating, and the line voltage has a frequency of 60 Hz.
b) draw the following voltage waveforms in relationship to the
input waveforms: VAB, VAD, and VCD. A double letter
subscript indicates a voltage from one point to
another.
Fig. 7