Professional Documents
Culture Documents
4
CLAUSE 7. FABRICAT ION AWS D1.1/D1.1M:2020
a
DESIRABLE ACCEPTABLE UNACCEPTABLE
R > RMAX
R < RMAX R = RMAX
i EXCESSIVE
t; J + f ; S�2 + +
i
' t;
I ........ I
c�
R < RMAX R=0
: +
L R< RMAX
{ H f
(A) WELD PROFILES FOR BUTT JOINTS
R=0 EXCESSIVE
C R C
Figure 1.4-Requirements for Weld Profiles (see Tables 1.8 and 1.9)
212
Copyright American Welding Society
Provided by IHS Marki! under license with AWS
No reproduction or networking permitted without license from IHS Not for Resale, 01/31/2020 02:35:12 MST
APPENDIX-1 Figure 7.4
AWS D1.1/D1.1M:2020 CLAUSE 7. FABRICATION
R > RMAX
R < RMAX R = RMAX
EXCESSIVE
_L _j_
R
C
Figure 1.4 (Continued)-Requirements for Weld Profiles (see Tables 1.8 and 1.9)
213
Copyright American Wei.ding Society
Provided by IHS Marki! Under license with AWS
No reproduction or networking permitted without license from IHS Not for Resale, 01/31/2020 02:35:12 MST
APPENDIX-1 Figure 7.4
CLAUSE 7. FABRICATION AWS D1.1/D1.1M:2020
·---
I I
I
I I I
I
I
I
I ,. I ,.
L-- ""--' L--.., .. _ _.
_,
' '
>
., ., > ., >
SIZE
I
I
I
I
-- L ,-:.:.,;;,�.----=---i I
(E) FILLET WELD PROFILES FOR INSIDE CORNER JOINTS, LAP JOINTS, AND T-JOINTS
,rC = EXCESSIVE
w
SCHEDULE C SCHEDULE C
SCHEDULE C APPLIES APPLIES
APPLIES
Figure 1.4 (Continued)-Requirements for Weld Profiles (see Tables 1.8 and 1.9)
214
Copyright American Welding Society
Provided by IHS Marki! under license with AWS
No reproduction or networking permitted without license from IHS Not for Resale, 01/31/2020 02:35:12 MST
APPENDIX-1 Figure 7.4
AWS D1.1/D1.1M:2020 CLAUSE 7. FABRICATION
DESIRABLE ACCEPTABLE
SHELF BAR
Figure 1.4 (Continued)-Requirements for Weld Profiles (see Tables 1.8 and 1.9)