Serial No.
‘PRLINE ITEM No. PRUNE ITEM NO.@
‘Name ofthe item ‘SUCKER ROD GUIDE ROLLER 3/4” WHEEL
(ROLLER GUIDE) FOR 3/4 INCH SUCKER RODS.
(GaP Material Code [as0006973
[pe Suitable for use with 3/4 inch Sucker RO X2-7/8 inch, 65
pot EVE tubing,
()_| Quantity tobe purchased 20s
‘Complete coupling including wheeled rollers ited on
them of each sizes as per (a} above
Ta__| Material of coupling body “Steel with minimum tensile sengih of 76000 sq. nde
for 3/8 inch sucker rod X 2-7/8 inch, 6.5 pof EVE tubing,
(a) | Material of Wheels & Rallpins Wheel shall beset on stainiess steel 65-316) journal and
roll pins. Wheel material shall be Ultra high molecular
‘weight poly-ethylene (UHM) suitable for application in
temp of up to 175
Te)_[tenath of couping Upto 30 inches
(| Number of wheels per counting Minimum 4 wheels
(| Coupling tireacs Pin threads suitable for Sucker rod-3/4 inch seas per
APL-118 specifications
(| Outside Diameter Suitable for use with 2778 inch, 65 por EUE tubing
TH | Additional details
T._ Each wheeled rod guide coupling should be supplied with extra set of wheel ht [4 wheels with ral pins and
lock pins
2. Each set should contain 4 wheels and pins suitable fr field replacement of item mentioned here and type of
{a)above
3. Total numberof set of wheel kit and roll in willbe equal o total number of roller guide mentioned at(b}
above.
NOTE:
1. All the above items should comply with other specifications lke Measurement, Testing, Gauging, Marking,
Packaging, Thread protectors and Color code etc. must be strictly adhered to 2s per above ref at (a)
2. Bidder must give details of offered items in the datasheet enclosed, which wl be only used for evaluation ot
technical specification
3._ Diagram of sucker rod guide roller tobe provided with Techno-commercil bi.
4. With regards to sucker rods thread, gauging and threading should be conforming to AP-118, 2010 or lates.
5. Copy of material Test Certificate, guarantee & warranty certificate shall be submitted along withthe materials
at the time of inspection and orginal copy shinged with material
‘TECHNICAL SPECIFICATIONS FOR SRP SUB SURFACE PUMPS AND ACCESSORIES FOR FY 2018-19