Professional Documents
Culture Documents
Part – 2: PRACTICAL
Sr Question Marks
No Max Given
1 Process Preparation
a Demonstrate the process of preparing the fabric for the dart stitch 2
b Demonstrate the process of threading of SLNS 2
c Demonstrate the process of preparing fabric for a piping work 2
2 Process/Part Identification
a Identify pocket styles 2
b Identify Needle Bar 2
c What is the reverse lever on a sewing machine? 2
3 Process Operation
a Carry out the process of attaching front and back parts of a given sample 8
Carry out the process of stitching square shapes as per the image
d Carry out the process of stitching "S" shape as per the image 8
Part – 3: VIVA
Sr Marks
Question
No Max Given
1 Terms & Definition
a What is thread tension? 2
b What is needle clamp? 2
c What is slide plate? 2
What is the equipment part is called?
d 2
2 Purpose of Process/Operation
a Why threading is necessary? 2
b Why tensioning is necessary and who control this? 2
c What is the importance of pressing? 2
d What is the importance of bobbin threading? 2
3 Function Of Parts/Auxiliaries
---------regulates the machine speed.
a 2
a. foot control b. feed dog c. pressure foot d. none of these
b What is the function of reveres lever? 2
c What is the function of power cord and switch? 2
d What is the function of hand wheel? 2
4 Quality Aspects
a What will happen if thread tension not applied properly? 2
2
d Explain the cleanliness in the work place? 2
e What will you do if any accidents at work? 2
Sub-total (Part – 2) 56
Sub-total (Part-3) 44
TOTAL (Part 2 + Part 3) 100
PART 4
Trainees is declared as
PASS FAIL
(tick at appropriate box)
Grade Obtained (In case of Pass)
A (Above 85 %) B (70%– 85%) C (60% – 69%)
(tick at appropriate box)
Code No of Assessor: A
Note: Assessor shall return the entire set of Assessment Sheet to the concerned Assessment Agency
Statutory Note: Assessment Agency shall retain the complete Assessment Sheet and shall be liable to
produce during verification by RSA
WARNING: No part of this Assessment Sheet shall be amended