Professional Documents
Culture Documents
PATH
NAUNI GILL
STEP 1
• Than put all your pieces together and see if the box
looks correct and if you need to make any final
adjustments before glueing it all together when you are
ready head to the glueing station and make your not to
use to much glue only the right amount and don’t put it
all over the table or the box and make sure to use your
finger to apply the glue and make sure to do it on both
sides of the cut to make sure it is firm and enough to
hold your item
STEP 8
• Give your piece arounf 24 hours to
fully glue and be stable and once it is
stable we are going to sand again
first we are going to use the belt disk
sander while using this machine we
can not push our piece towards the
belt because if so it will sand way to
much off so you have to be paying
attention to how much is getting
sanded off and also you sand only 2
of your sides than you head over to
the smalled sanders and sand once
again using all 3 of them
STEP 9