Professional Documents
Culture Documents
1x6x59
MATERIAL LIST:
6 ea. 1x6x8'
2 ea. 2x4x9'
1 ea. 48x48 corrugated plastic sheet
Screws as needed
1x6x37
1x6x37
CUTS:
1. Cut 2 ea. 1x6x59 top and bottom rails.
Cut-offs will make 2 ea. 1x6x37 vertical rails
2. Cut 4 ea. 1x6x72 legs. Cut-offs will make 2
ea. 1x6x22 leg spacers
3. Cut 4 ea. 2x4x48 feet
4. Cut 4 ea. 2x4x5.5 feet blocking
1x6x59
1x6x22 2x4x5.5
2x4x48
2x4x48
Silver Mountain Targets Sample Frame
1 2 5
4'-11" 1x6x59
2" Step 5:
To assemble, place the 2 feet parallel to
Step 1: Step 2: each other on the ground, and insert the
1x6x37
1x6x37
Layout two legs, 4'11" Lay two vertical rails, upright legs of the main target into the
apart and 2 horizontal rails spaces in the feet. Fasten target backer
as shown. (cardboard or corrugated plastic) to rails.
Fasten target on backer
1x6x59
1x6x72 1x6x72
3 4
1x6x59 Step 4:
Step 3: Build two sets of feet, with spaces
Add the last two legs ¾” wide between the 2x4 spacers
on top, aligning them and the upright 1x6. Spaces are
with the first two for the legs of the main target
legs. Securely fasten
with 2" screws in
locations shown
1x6x59 Side View