You are on page 1of 1

1. Determine VGS of M3. VTN= | VTP| = 0.4 V, kn= kp =120μA/V2, λn= |λp| = 0.015V-1.

x1 and x2
are last two numbers of your register number respectively. (8)

2. Analyze the characteristics of FET differential amplifier with active loads. Derive its small-
signal differential voltage gain. (10)
3. Draw the current steering and derive the expression for current transfer ratios. (4)
4. For the amplifier shown in the below Fig. determine output resistance Ro. Assume
β1= β2 = 100. x1 and x2 are last two numbers of your register number respectively. (10)

5. Draw a Widlar current source and mention its importance. (4)


6. For the depletion mode MOSFET connected in a configuration shown in the below figure
sketch its approximate ID – VDS characteristic (4)

You might also like