Professional Documents
Culture Documents
1 500
200
150
Stock Chest, Washers, Moderate
280
100
Sag/Ball Mills, Kilns Drives Dust/Dirt
420
500,000
speed factors.
ISO
400,000 635 100 1.5 - 5.0 A A A A A Photo courtesy of SKF USA Inc.
7
630-220 #1 220 0.5 - 1.5 A A B A B Re-greasing volume based on bearing size and service intervals,
ISO
300,000
for ideal conditions.
10
200,000 *NDm X 100K, A=Best B=Good C=Fair NR= Not Recommend For a specific application, use Re-Greasing Frequency Chart.
ISO
90%
22
Chesterton Operating
SPEED FACTOR
W
ISO
Grease Temperature B
Grease Fill %
ISO
100,000
0 - 75,000 1 70%
46
to 100°F) L
68
50,000
D
00
30,000
625, 630 (0 to 150°F) 30%
150,000 - 300,000 3
ISO 220
Inc.
37 to 135°C 10%
ISO 460
630-220 #1, (100 to 275°F) 75,000 - 150,000 3 Quantity in grams (g) = D x B x 0.005
635 0%
10,000 150,000 - 300,000 3
0 200K 400K 600K 800K 1M 1.2M 1.4M If only bearing housing dimensions are known, grams can
-40 -20 0 20 40 60 80 100 120 Please contact Chesterton Application Engineering for NLGI #3. be estimated by quantity in grams (g) = (W x L)/3 x 0.005.
NLGI depends on other factors as well, including bearing type, thickener Speed factor mm x min -1
TEMPERATURE °C Dimensions are in mm.
type, base oil viscosity, and base oil type.