Professional Documents
Culture Documents
Small Signal Diode 1N91x, 1N4x48, FDLL914, FDLL4x48: Ordering Information
Small Signal Diode 1N91x, 1N4x48, FDLL914, FDLL4x48: Ordering Information
www.onsemi.com
ABSOLUTE MAXIMUM RATINGS (Values are at TA = 25°C unless otherwise noted) (Note 1)
Rating Symbol Value Unit
Maximum Repetitive Reverse Voltage VRRM 100 V
Average Rectified Forward Current IO 200 mA
DC Forward Current IF 300 mA
Recurrent Peak Forward Current If 400 mA
Non−repetitive Peak Forward Surge Current Pulse Width = 1.0 s IFSM 1.0 A
Pulse Width = 1.0 ms 4.0 A
Storage Temperature Range TSTG −65 to +200 °C
Operating Junction Temperature Range TJ −55 to +175 °C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. These ratings are limiting values above which the serviceability of the diode may be impaired.
THERMAL CHARACTERISTICS
Parameter Symbol Max Unit
Power Dissipation PD 500 mW
Thermal Resistance, Junction−to−Ambient RqJA 300 °C
www.onsemi.com
2
1N91x, 1N4x48, FDLL914, FDLL4x48
120
160 o
Ta=25 C
o Ta= 25 C
100
150
80
140
60
130
40
120
20
110 0
1 2 3 5 10 20 30 50 100 10 20 30 50 70 100
Figure 1. Reverse Voltage vs. Reverse Current Figure 2. Reverse Current vs. Reverse Voltage
BV − 1.0 to 100 mA IR − 10 to 100 V
550 750
o
Ta= 25 C
o Ta= 25 C
500 700
450 650
400 600
350 550
300 500
250 450
1 2 3 5 10 20 30 50 100 0.1 0.2 0.3 0.5 1 2 3 5 10
Forward Current, I F [uA] Forward Current, I F [mA]
Figure 3. Forward Voltage vs. Forward Current Figure 4. Forward Voltage vs. Forward Current
VF − 1 to 100 mA VF − 0.1 to 10 mA
1.6 900
o
Ta= 25 C
Typical
800
1.4 o
Forward Voltage, VF [mV]
Ta= −40 C
Forward Voltage, V F [mV]
700
1.2 o
600
Ta= 25 C
1.0 500 o
Ta= +65 C
400
0.8
300
0.6
10 20 30 50 100 200 300 500 800 0.01 0.03 0.1 0.3 1 3 10
Forward Current, I F [mA]
Forward Current, I F [mA]
Figure 5. Forward Voltage vs. Forward Current Figure 6. Forward Voltage vs. Ambient Temperature
VF − 10 to 800 mA VF - 0.01 - 20 mA (- 40 to +65°C)
www.onsemi.com
3
1N91x, 1N4x48, FDLL914, FDLL4x48
0.90 4.0
o o
TA = 25 C Ta = 25 C
0.85 3.0
2.5
0.80 2.0
1.5
0.75 1.0
0 2 4 6 8 10 12 14 10 20 30 40 50 60
500 500
300 300
100 100
0 0
0 50 100 150 0 50 100 150 200
o
Ambient Temperature ( oC) Temperature ( C)
Figure 9. Average Rectified Current (IF(AV)) Figure 10. Power Derating Curve
vs. Ambient Temperature (TA)
www.onsemi.com
4
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
AXIAL LEAD
CASE 017AG
ISSUE O
DATE 31 AUG 2016
4.56
3.05
0.533
0.460 NOTES: UNLESS OTHERWISE SPECIFIED
A) PACKAGE STANDARD REFERENCE:
JEDEC DO−204, VARIATION AH.
B) HERMETICALLY SEALED GLASS PACKAGE.
C) PACKAGE WEIGHT IS 0.137 GRAM.
D) ALL DIMENSIONS ARE IN MILLIMETERS.
1.91
1.53
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
DOCUMENT NUMBER: 98AON13443G Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
MiniMELF / SOD−80
CASE 100AD
ISSUE O
DATE 30 APR 2012
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
DOCUMENT NUMBER: 98AON79582E Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
onsemi and are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves
the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation
special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others.
ADDITIONAL INFORMATION
TECHNICAL PUBLICATIONS: ONLINE SUPPORT: www.onsemi.com/support
Technical Library: www.onsemi.com/design/resources/technical−documentation For additional information, please contact your local Sales Representative at
onsemi Website: www.onsemi.com www.onsemi.com/support/sales