Professional Documents
Culture Documents
09 Sparkmix Epoxy
09 Sparkmix Epoxy
(INJECTION EPOXY)
PRODUCT DESCRIPTION SPARKMIX EPOXY-IE is a two component, solvent free epoxy system.
A low viscosity epoxy that is good for grouting and repairing
damaged or concrete with cracks as injection epoxy.
SURFACE PREPARATION Remove laitance, grease, oil, curing compounds, dirt, foreign
materials and disintegrated materials using wire brush or air
compressors. Surface must be clean and dry.
HEALTH AND SAFETY Gloves, goggles, barrier creams or protective clothing must be worn
while mixing and applying SPARKMIX EPOXY-IE. Splashes in the skin
should be removed with water. Contact with eyes should be flushed
with water for at least 10 minutes. SEEK MEDICAL ASSISTANCE.
TYPICAL PROPERTIES
FOOTNOTES:
1. Based on actual report of 3.74 in. Sq. X 0.13 kg epoxy cube of Sparkmix
Epoxy IE
2. Formulated with 90% EEW 190 DGEBA & 10% diluents E748,40deC @
24 hours.
PACKAGING 1 gallon kit (3/4 gal. component “A” & 1/4 gal. component “B”)
SPARKTON PRODUCTS are intended for industrial use only. Keep away from children.
Observe product caution