A. Pipe 6D before test. Polyethylene pipe conforming to B. Pipe 60 after test. No measurable thickness loss.
Good ASTM F 678. Photo P801-D-80674 erosion resistance. Photo P801-0-80675
c. Pipe 6T before test. This is an ABS truss composite
pipe conforming to ASTM D 2680. Annulus between con- centric tubes is filled with lightweight concrete. Exposed D. Pipe 6T after test. Wear on the liner was minor. surfaces of lightweight concrete were coated with a vinyl Erosion resistance is good. Photo P801-D-80677 resin solution to reduce absorption of water. Photo P801- D-80676
Figure 14. -Polyethylene and ABS pipes before and after test.