Professional Documents
Culture Documents
0-3/2018
LOCAL STORM
DETECTION
Symbol
3
AT-555 | REMOTE RELAY MODULE Instruction Manual
The connsole is provided with 4 dry-contact relays able to switch signals up to 250 V, 2 A.
These relays can be associated with different events and alarms using the alarm configuration
screen (see 7.1)
3 3
2 2
1 Normally open
2 Common
1 1
3 Normally closed
4
Front panel
Network indicator
Use of CPU
Rear panel
On/OFF CAN-RS-485
Switch Communication
5
AT-555 | REMOTE RELAY MODULE Instruction Manual
MODBUS COMMUNICATION
The ATSTORM® REMOTE RELAY MODULE has implemented a Modbus Commnication over
RS-485 or TCP in order to get information from ATSTORM V3 sensors.
TCP:
The paremeters of the Modbus Configuration can be done by the settings webpage of the
system:
To configure the IP settings enter the new settings and press SAVE
To configure the Slave ID and the Local Port enter the new settings and press SEND
6
MODBUS COMMUNICATION
REGISTER MAP
The ATSTORM® REMOTE RELAY MODULE has implemented a Modbus Commnication over
RS-485 or TCP in order to get information from ATSTORM V3 sensors.
0 NORMAL
1 ALERT
2 EMERGENCY
3 MAX. RISK
-1 No server comm
-2 No sensor comm
7
AT-555 | REMOTE RELAY MODULE Instruction Manual
RS-485
8
9
Notas
Notas
Aplicaciones Tecnológicas S.A. - Parque Tecnológico de Valencia - Nicolás Copérnico, 4 - 46980 Paterna (Valencia), Spain
T +34 961 318 250 - F +34 961 318 206 - atsa@at3w.com - at3w.com