Professional Documents
Culture Documents
Task 3
Task 3
nut
Step1: select polygon command
Step 5: make two circles with centre same as hexagon of radius 10 and 20 mm
Step 7: select extrude and the inner circle and hexagon and press enter and make height upto 20 mm
Step 11: select fillet -> multiple -> radius (enter 3mm)->enter
Step 12: select two opposite corners of the structure and pree enter to get the fillet
Step 13: select solid intersect object->select the middle part and the rest and press enter
Step 14: now the shape of bolt is ready , now to form threads
Step 15: type helix command and make the threads inside the bolt having diameter 10 top radius 10
number of turns 20 and height 20
Step 16: make a circle of 0.5 mm then select sweep now select the helix and press enter
Step 17: select subtract then select outer body and then then the helical path then press enter
Step 18: now using “union” merge them to get the bolt
Bolt
Step19: select polygon command
Step 23: make two circles with centre same as hexagon of radius 10 and 20 mm
Step 26: select fillet -> multiple -> radius (enter 3mm)->enter
Step 27: select two opposite corners of the structure and press enter to get the fillet
Step 28: select solid intersect object->slect the middle part and the rest and press enter
Step 29: now using extrude make the inner circle extrude to 60 mm
Step 30: now as done in bolts use helix make outer threads of the nut
Step 31: usng intersect the bottom part of the nuts and press enter and then using “union make the
nut into single object”
Step 32: now use move command and move the bolt and match their centers and attach them