Professional Documents
Culture Documents
1
License and Software Installation Instructions
5
License Installation – Node Locked
1. Run the VI-Licensing Setup .exe 3. Accept the default component selections, install software
2. Read and accept terms and conditions 4. Enter the port number ( can leave default port # if it is an
open/unused port ) and browse to your license file
6
License Installation – Node Locked
5. If the license installation process was successful, you will get the 7. Under system variables → check that the environment variable
below message VIGRADE_LICENSE_PATH = 6200@localhost exist ( adjust port #
based on how your license was setup ).
7
License Installation – Floating License
SERVER
1. For floating license installation, follow the same steps indicated in
previous 2 slides for node locked licenses, but this time on the
SERVER Machine .
8
License Installation – Floating License
CLIENT 2. Once installed, search for “environment variables” on your windows
search and go to result “Edit the system environment variables”.
On the client machine, Select the “Environment variables” button
• 1. Install VI-Licensing on the client machine. During the installation
process make sure to un-check the component "License Server"
and proceed with the installation of "Client Tools“ and "Visual
Studio runtime".
9
License Installation – Floating License
4. As a last step, go to the License Manager in NVH Simulator NVH Simulator reads the system environmental variables
(as set on previous page) the first time it is launched, and
uses these here in the license server address field of the
license manager. If later modified in the license manager, it
uses the new modified license server addresses instead of
system environmental variables.
This license manager in NVH Simulator applies license
server settings to all NVH Sim applications (including SPC,
DPT, Road Creator, etc.)
Note: you can setup multiple hosts or combination of floating and node locked licenses. Need to setup License Manager and environmental
variables appropriately
Eg: 1. Floating & node locked combination
6200@NVHSimulator.network.com ; 6200@localhost The order of host determines which
or license is accessed first
6200@localhost;6200@NVHSimulator.network.com
10
Floating license – Who is using the license?
• On the client side, we now have the ability to get information on which user is currently using a network
license
• To do this, go to the Command prompt on the client pc and use the command
cd C:\Program Files\VI-grade\VI-Licensing Setup 2023
lmxendutil.exe –licstat –vendor vigrade –host <hostname> -port <port number> -network
11
VI-Licensing Control Panel
• The License Control Panel
provides access to license
usage and log file
information
License Manager
1. With the new Licensing system, we have a new license manager setup.
2. The license manager now has additional check out options for additional licenses like Jury, ORS and ESS. These are not checked out by
default now, so that some of these licenses when unused can be utilized by someone else ( network licenses ) .
3. For internal node locked licenses, since you would probably want to check out all licenses, pls. go to the license manager and check the
checkboxes. You will need to do this only the first time you launch the latest version of NVH Sim.
13
Install NVH Simulator and SPC/DPT
Note:
From NVH Simulator 2022.2 DPT is no longer required, all functionality is available in NVH Data Prep
(part of NVH Simulator installer)
SPC/DPT installer is still needed for SPC installation, but latest version is 2022.1 14
Quick Checks
• Once you have installed the software, check to make
sure the corresponding programs appear in the start
menu in the NVH Simulator folder SPC Installer
QNX Installer
SPC Installer
15
Software Version
• The version number for the software is in the
About box
• Please include it when sending in feedback…
16
Additional Software
The following software can be downloaded as needed: