Professional Documents
Culture Documents
Contents
System Requirements..................................................................................................................................................... 2
What is the Hardware Key? ........................................................................................................................................... 2
Should I Install PTW on the Server or on the Workstations? ........................................................................................ 2
01/25/2017 1
Minimum System Requirements
• PC running Windows 7 or newer Desktop Operating System
• Intel or AMD Processor
• 40 GB minimum hard disk space
• 4 GB of RAM
If you use option 2, you will need to install the Advanced Features SKM to every workstation. Advanced Features
include special reporting fonts, Crystal Reports, SKMPDF, etc.).
01/25/2017 2
Installing PTW
1. Log on to your computer with Full Administrative Rights.
Insert the PTW CD into your CD-ROM drive or run the setup file from our website (www.skm.com and click on
Downloads). The following window will appear:
2. Click the “Install Power*Tools for Windows (PTW) Software” option. (Note that the other options are not
required to be installed unless directed by SKM Technical Support.)
3. PTW will begin the installation process. When you get to the options screen, you should install all parts of the
software, especially if this is the first time you are installing PTW.
The first time you install PTW, you should select all the options.
01/25/2017 3
Installing Advanced Features
4. Log on to the workstation with Full Administrative Rights.
Insert the PTW CD into your CD-ROM drive or run the setup file from our website (www.skm.com and click on
Downloads). The following window will appear:
6. At the Select Features screen, uncheck all options except the Advanced Features option and continue until
installation finishes.
01/25/2017 4
Part 1:
Getting the
server to
broadcast
the
hardware
key
1. Obtain the latest License Manager software from www.skm.com and click on Downloads. The name of the
License Manager is HASPUserSetup.exe.
2. Run HASPUserSetup.exe and once the installation finishes, attach the USB key to the server.
3. Make note of the server IP address as it will be used to configure the software.
01/25/2017 5
Part 2:
Getting the
software to
see the
hardware
key
If your workstations will run PTW using a shortcut to the shared server or computer, you only need to perform the
following steps on that machine.
If your workstations will have PTW installed to locally, you need to repeat these steps on each workstation which has
PTW installed.
2. Rename the file from "nethaspip_.ini" to "nethaspip.ini" (Delete the underscore in the filename.)
3. Double-click the file and open it with Notepad. In the first line, type IP, xxx.xxx.xx.xx where the x refers to the
server IP address:
Example: IP,192.168.20.31
5. Start PTW will run on the workstation. When prompted, select Network Hardware Key and the licensed
modules that you have purchased.
b) Open a web browser and go to http://localhost:1947 Click on Configuration > Access to Remote License
Managers.
c) Enter the server IP address, check Aggressive Search for Remote Licenses, and click on Submit.
d) Wait 1 minute and then start PTW. When prompted, select Network Hardware Key and the licensed
modules that you have purchased.
01/25/2017 6
Monitoring the Hardware Key & Users
Part 3(optional):
Admin Control
Center, User
List, Logging
On the server where the key is attached, open a web browser and go to http://localhost:1947.
Click on Sentinel Keys on the left side panel. From here, you will be able to view available study modules and any
users connected to the licenses, which you click on Sessions.
The following table contains the program number along with the corresponding study module.
01/25/2017 7
Workstation users can also access the License Manager by going to http://localhost:1947 (provided that
HASPUserSetup.exe was installed on their workstation). Make sure “Allow Remote Access to ACC” is checked on
the server.
01/25/2017 8
Logging
Click on Configuration on the left-hand side. Check the boxes to enable “Write an Access Log File”, “Include Local
Requests”, “Include Remote Requests”.
01/25/2017 9
What if I Want to Use the Network Key Temporarily as a Local Key?
Occasionally you might want to use the network key locally—for example, if you have a laptop computer and want
to take the network key home. You can install PTW on the computer as you normally would, but once PTW is
installed you will need to install the standalone driver for the hardware key.
1. To install the driver, you can run C:\PTW32\bin\HASPUserSetup.exe with Full Administrative Rights
NOTE: HASPUserSetup.exe can also be located on our website (http://www.skm.com/downloads.html)
2. Configure C:\PTW32\lib\nethaspip.ini. Refer to Part 2 above for step-by-step instructions. Use 127.0.0.1 as the
IP address of your local machine. Otherwise, use your Computer Host Name as the server address.
01/25/2017 10