Professional Documents
Culture Documents
2. What is the design strength of the section using a reduction factor of 0.90?
3. What additional concentrated live load can the beam carry at the midspan?
SITUATION: A reinforced concrete beam has a width of 300 mm and an effective depth of 600 mm.
Compression reinforcement if needed will be placed at a depth of 60 mm below the top. If fc’=30 MPa, fy=414
MPa, and if the beam is to resist an ultimate moment of 650 kN-m.
SITUATION: A doubly reinforced concrete beam section has an effective depth of 625 mm and a width of 350
mm. It is reinforced with compressive bars at the top having an area of 1500 sq. mm and 4970 sq. mm tension bars
at the bottom with a steel covering of 62.5 mm both on top and bottom bars. Balanced steel ratio = 0.0285,
fc’=27.58 MPa and fy=413.4 MPa. Use NSCP 2015.
9. Compute the safe concentrated live load that the beam could carry at its midspan if it has a service dead load of
30 kN/m on a span of 6m.