Professional Documents
Culture Documents
Candy Washing Machine Manual Original
Candy Washing Machine Manual Original
Thank you for choosing this product. WEEE contains both polluting substances (which
We are proud to offer the ideal product for can cause negative consequences for the
you and the best complete range of home environment) and basic components (which can
appliances for your daily routine. be re-used). It is important to have WEEE
subjected to specific treatments, in order to
remove and dispose properly all pollutants, and
Carefully read this manual for correct and
recover and recycle all materials. Individuals can
safe appliance use and for helpful tips on
play an important role in ensuring that WEEE
efficient maintenance.
does not become an environmental issue; it is
essential to follow some basic rules:
l WEEE should not be treated as household
waste;
Only use the washing machine after
carefully reading these instructions. We l WEEE should be handed over to the relevant
recommend you always keep this manual on collection points managed by the municipality or
hand and in good condition for any future by registered companies. In many countries, for
owners. large WEEE, home collection could be present.
In many countries, when you buy a new
appliance, the old one may be returned to the
FOR U.K. ONLY retailer who has to collect it free of charge on a
On receipt of your appliance please one-to-one basis, as long as the equipment is of
check it carefully for damage. Any equivalent type and has the same functions as
damage found must be reported the supplied equipment.
to the delivery driver immediately.
Alternatively damage found must be
reported to the retailer within 2 days of Contents
receipt.
1. GENERAL SAFETY RULES
2. INSTALLATION
Each product is identified by a unique 16-
character code, also called the “serial 3. DETERGENT DRAWER
number”, printed on the sticker. This can be 4. PRACTICAL HINTS
found inside the door opening. This code is
a unique code for your product that you will 5. CLEANING AND MAINTENANCE
need to register the product warranty, or if
you need to contact the Customer Service 6. REMOTE CONTROL (WI-FI)
Centre. 7. QUICK USER GUIDE
8. CONTROLS AND PROGRAMS
Environmental conditions 9. TROUBLESHOOTING AND WARRANTY
2
1. GENERAL SAFETY in a safe way and understand the
RULES hazards involved.
EN
Children shall not play with the
l This appliance is intended to appliance. Cleaning and user
be used in household and maintenance shall not be made
similar applications such as: by children without supervision.
- Staff kitchen areas in shops, offices
and other working environments; l Children should be supervised
- Farm houses; to ensure that they do not play
- By clients in hotels, motels and with the appliance.
other residential type environments; l Children of less than 3 years
- Bed and breakfast type environments. should be kept away unless
A different use of this appliance continuously supervised.
from household environment l If the supply cord is damaged, it
or from typical housekeeping must be replaced by a special
functions, as commercial use by cord or assembly available from
expert or trained users, is excluded the manufacturer or its service
even in the above applications. If agent.
the appliance is used in a manner
l Only use the hose-sets
inconsistent with this it may reduce supplied with the appliance for
the life of the appliance and may
the water supply connection
void the manufacturer’s warranty. (do not reuse old hose-sets).
Any damage to the appliance or
other damage or loss arising l Water pressure must be between
through use that is not consistent 0.05 MPa and 0.8 MPa.
with domestic or household use l Make sure carpets or rugs do
(even if located in a domestic or not obstruct the base or any of
household environment) shall not the ventilation openings.
be accepted by the manufacturer to
l After installation, the appliance
the fullest extent permitted by law.
must be positioned so that the
l This appliance can be used by plug is accessible.
children aged from 8 years and
l The maximum load capacity of
above and persons with reduced dry clothes depends on the
physical, sensory or mental
model used (see control panel).
capabilities or lack of experience
and knowledge if they have been l To consult the product technical
given supervision or instruction specification please refer to the
concerning use of the appliance manufacturer website.
3
Electrical connections and l Donot expose the washing
safety instructions machine to rain, direct sunlight
or other weather elements.
l The technical details (supply Protect from possible freezing.
voltage and power input) are
indicated on the product rating l When moving, do not lift the
plate washing machine by the knobs
or detergent drawer; during
l Make sure that the electrical transport, never rest the door on
system is earthed, complies the trolley. We recommend two
with all applicable law and that people lift the washing machine.
the (electricity) socket is
compatible with the plug of the l In the event of fault and/or
appliance. Otherwise, seek malfunction, turn off the
qualified professional assistance. washing machine, close the
water tap and do not tamper
l The use of converters, multiple
with the appliance.
sockets or extension cords is
Immediately contact the
strongly advised against
Customer Service Centre and
l Before cleaning or maintaining
only use original spare parts.
the washing machine, unplug Failure to observe these
the appliance and turn off the instruction may jeopardise
water tap. appliance safety.
WARNING:
water may reach very high
temperatures during the
wash cycle.
4
2. INSTALLATION
l Remove the 2 or 4 transportation
EN
1
screws (A) on the back and
remove the 2 or 4 flat washers, A A
B
rubber bungs and plastic spacer B A
tubes (B) as illustrated in figure 1. A
B B
l If the washing machine is built-in,
unscrew the 3 or 4 transportation
screws (A) and remove the 3 or 4
flat washers, rubber bungs and
plastic spacer tubes (B).
l During the removal of the screws
occasionally spacer tubes fall
inside the product, these can be
remove by tilting the product forward
and recovering them from the floor or
inside the base of the machine.
l Cover the open transportation screw 2
holes with the 2 or 4 plastic caps
A
included in the instruction bag. 3
1 2
WARNING:
keep packaging materials
away from children.
l Place the corrugated plastic sheet, B
found on top of the appliance during
the unpacking process, into the base
of the appliance as shown in figure 2
(according to the model, consider
version A, B or C).
In some models this operation
will not be necessary, because C
the corrugated plastic sheet
will be already placed on the 3
bottom of the appliance. 2 1
5
Hydraulic connections 3
4
l HOT&COLD (fig. 4):
water mains connection settings with hot
and cold water for higher energy savings. 1
Connect the grey tube to the cold water
tap and the red one to the hot water
tap. The machine can be connected to
the cold water tap only: in this case, some
programs may start a few minutes later.
5
l AQUASTOP (fig. 5):
a device located on the supply tube that
stops water flow if the tube deteriorates; B
in this case, a red mark will appear in the
window “A” and the tube must be
replaced. To unscrew the nut, press the A
one-way lock device "B".
6
Setting 7
l The washing machine should be installed in
EN
its final position such that the water fill hose
is not kinked or trapped. The corrugated
drain hose should be inserted into suitable
drain pipe of between 50 cm and 85 cm
height above the floor using the curved drain
hose support. If an under sink connection is
used the drain hose must be routed above
the sink overfill opening to prevent back
siphoning. Care must be taken to avoid
min 4 cm
kinking or trapping the drain hose (fig. 7).
max 100 cm
l Level the appliance using the feet as
+2,6 mt
illustrated in figure 8:
max min 50 cm
a. turn the nut clockwise to release the max 85 cm
screw;
b. rotate the foot to raise or lower it until it * ACCESSORY SOLD SEPARATELY
touches to the floor;
c. lock the foot, screwing in the nut, until it 8
tightens against to the bottom of the
washing machine.
WARNING: B
contact the Customer Service Centre
should the power cord need
replacement.
Installation faults are not covered by
the manufacturers warranty.
C
7
3. DETERGENT DRAWER
The detergent draw is split into 3
compartments as illustrated in figure 9: 9
l compartment "1": for prewash detergent;
l compartment “ ”: for special additives, 1
softeners, starch fragrances, etc.;
2
WARNING:
only use liquid products; the washing
machine is set to automatically dose
additives at each cycle during the last
rinse.
8
4. PRACTICAL HINTS Maximise the load size
l Achieve the best use of energy, water,
Load tips detergent and time by using the
EN
recommended maximum load size.
When sorting laundry, make sure: Save up to 50% energy by washing a full
load instead of 2 half loads.
- have eliminated metallic objects such as
hair clips, pins, coins, from laundry;
Do you need to pre-wash?
- to have buttoned pillow cases, closed l For heavily soiled laundry only!
zips, tied loose belts and long robe SAVE detergent, time, water and
ribbons; between 5 to 15% energy consumption
- to have removed rollers, hooks or clips by NOT selecting Prewash for slight to
from curtains; normally soiled laundry.
9
The use of ecological detergents without
When washing heavily soiled whites, phosphates may cause the following
we recommend using cotton programs of effects:
60°C or above and a normal washing
powder (heavy duty) that contains
- cloudier rinse drain water: This effect is
bleaching agents that at medium/high
tied to the suspended zeolites which do
temperatures provide excellent results.
not have negative effects on rinse
efficiency.
For washes between 40°C and 60°C
the type of detergent used needs to be - white powder (zeolites) on laundry at
appropriate for the type of fabric and the end of the wash: this is normal, the
level of soiling. Normal powders are powder is not absorbed by fabric and does
suitable for “white” or colour fast fabrics not change its colour.
with high soiling, while liquid detergents To remove the zeolites, select a rinse
or “colour protecting” powders are programme. In the future consider using
suitable for coloured fabrics with light slightly less detergent.
levels of soiling.
- foam in the water at last rinse: this does
not necessary indicate poor rinsing.
For washing at temperatures below Consider using less detergent in future
40°C we recommend the use of liquid washes.
detergents or detergents specifically
labeled as suitable for low temperature
washing. - abundant foam: This is often due to the
anionic surfactants found in the detergents
which are hard to eliminate from laundry.
For washing wool or silk, only use In this case, do not re-rinse to eliminate
detergents specifically formulated for these effects: it will not help at all.
these fabrics. We suggest conducting a maintenance
wash using a proprietary cleaner.
l Too much detergent leads to excessive
foam, which prevents the cycle being If the problem persists or if you suspect a
carried out correctly. It could also affect malfunction, immediately contact an
the quality of the washing and rinsing. Authorised Customer Service Centre.
10
5. CLEANING AND l Fill the drawer with hot water.
MAINTENANCE
EN
Looking after your appliance correctly can
extend its lifespan.
Drawer cleaning
l Shake the drawer in order to let the water
l It is advisable to regularly clean the flow in all the compartments.
detergent drawer to avoid the
accumulation of detergent and additive
residues.
1 WARNING:
DO NOT use acid products (for example
vinegar) or aggressive detergents to
clean the drawer, in order to avoid
2 damaging the seals and/or internal
parts of the appliance.
11
Cleaning the pump filter S u g g e s tio n s fo r m o v e s o r
prolonged disuse
l The appliance has a special filter that
traps larger residues that could block the
draining system, such as buttons or coins l If the appliance is kept in a non-heated
(depending on the model, consider room for long periods of time, all water
version A or B). residues must be completely removed
We recommend checking and cleaning from the pipes.
the filter 5 or 6 times a year.
l Disconnect the machine from the power
l Disconnect the machine from the power supply socket.
supply.
l Ensure all the water has been emptied l Detach the tube from the drainage system
from the drum. and clip on the rear of the machine and
l Before unscrewing the filter, we lower it, fully draining water into a bowl.
recommend you place an absorbent cloth
under it to keep the floor dry. A small l Secure the drain tube with the drainage
amount of water will come out of the filter system and clip on the rear of the
as you remove it - this is normal. machine when finished.
l Turn the filter counter-clockwise to the
limit stop. l Keep the door glass and gasket clean.
l Remove and clean the filter; when
finished, replace it turning it clockwise. FOR MODELS WITH AUTOMATIC
The filter handle will be locked when it is LIQUID DETERGENT AND SOFTENER
not possible to turn any further and the DOSING SYSTEM:
handle is horizontal. Smearing a small should you need to tilt or move the
amount of liquid soap on the filter seal will machine, remove the detergent drawer
help refitting. before proceeding, keeping it
l Repeat the previous steps in reverse horizontal so as to avoid any leakage.
order to reassemble all parts.
12
6. REMOTE CONTROL (WI-FI)
This appliance is equipped with Wi-Fi
EN
technology that allows you to control it
remotely via App.
13
7. QUICK USER GUIDE 8. CONTROLS AND
This washing machine automatically adjusts PROGRAMS
the level of the water to the type and
quantity of washing. This system gives a
reduction in energy consumption and a
saving in washing times. H I
Program selection A
DC E F G B
l Turn on the washing machine and select
the required program.
l Adjust the washing temperature if H I
necessary and press the required "option"
buttons.
A
l Press the START/PAUSE button to start
E D C F G B
washing.
If there is a break in the power supply
whilst the machine is operating, when
the power is restored, the machine will
restart from the beginning of the phase it * Depending on model
was in when the power was lost.
l At the end of the programme, the A Programme selector with OFF
message "End" will appear on the display position
or, on some models, all wash stage
indicator lights will turn on. B START/PAUSE button
C DELAY START button
Wait until the DOOR LOCKED light has D OPTIONS button
gone out before opening the door.
E RAPID / STAIN LEVEL button
l Turn off the washing machine. F TEMPERATURE SELECTION
button
For any type of wash, see the program
table and follow the operating sequence G SPIN SPEED button
as indicated. F+G CHILD LOCK
14
l After switching on the appliance, wait a
WARNING: few seconds for the programme to start
don’t touch the buttons while inserting running.
EN
the plug because the machines
PROGRAMME DURATION
calibrates the systems during the first
seconds: touching the buttons, the l When a programme is selected the
machine couldn’t work property. In display automatically shows the cycle
this case, remove the plug and repeat duration, which can vary, depending on
the operation. the options selected.
l Once the programme has started you will
be kept informed constantly of the time
Opening the door remaining to the end of the wash.
A special safety device prevents the l The appliance calculates the time to the
door from being opened immediately end of the selected programme based
after the end of the cycle. upon a standard loading, during the cycle,
Wait for 2 minutes after the wash the appliance corrects the time to that
cycle has finished and the "Door applicable to the size and composition of
Security" light has gone out before the load.
opening the door.
PROGRAMME END
l When the display shows that the
PROGRAMME selector with OFF programme is finished and the DOOR
position LOCKED indicator light has gone out, the
door can be opened.
l When the programme selector is turned
the display lights up to show the settings l At the end of the cycle, switch off the
for the programme selected. appliance by turning the selector to OFF.
15
l Press the START/PAUSE button again to
re-start the programme from the point it OPTIONS button
had been paused at.
This button allows you to choose between
three different options:
CANCELLING THE SET PROGRAMME
- EXTRA RINSE
l To cancel the programme, set the
selector to the OFF position. l This option allows you to add one rinse at
the end of the washing cycle and is useful
l Wait until the DOOR LOCKED light has for people with delicate and sensitive
gone out before opening the door. skin, for which a small amount of
detergent residue can cause irritations or
allergies.
DELAY START button l It is advisable to also use this function for
the children clothes and for the washing
l This button allows you to pre-programme of heavily soiled items, which requires a
the wash cycle to delay the start of the lot of detergent to be used, or for the
cycle for up to 24 hours. washing of toweling items whose fibres
mostly have the tendency to hold the
l To delay the start use the following detergent.
procedure: Pre
- PREWASH
- Select the required programme.
l This option allows you to make a prewash
- Press the button once to activate the and it is particularly useful for heavily
delay start and then press it again (or soiled loads (can be used only on some
hold it) to set the desired delay. The programmes as shown in the table of
delay increases each time the button is programmes).
pressed up to 24 hours, at which point l We recommend you use only 20% of the
pressing the button again will reset the recommended quantities shown on the
delay start to zero. detergent pack.
- Confirm by pressing the START/PAUSE - EASY IRON
button. The delay countdown will begin (only available on certain models)
and when it has finished the programme
will start automatically. This function allows you to minimizes
creases as much as possible, eliminating
l It is possible to cancel the delay start by the intermediate spins or reducing the
turning the programme selector to OFF. intensity of the last one.
16
l A dedicated steam treatment was devised SPIN SPEED button
for each programme, to guarantee
washing top efficiency depending on item l By pressing this button, it is possible to
EN
fabrics and colours. reduce the maximum speed, and if you
wish, the spin cycle can be cancelled.
If an option is selected that is not l If the label does not indicate specific
compatible with the selected information, it is possible to use the
programme then the option indicator maximum spin expected in the program.
light first flashes and then goes off.
To prevent damage to the fabrics, it is
not possible to increase the speed
RAPID / STAIN LEVEL button over the maximum allowed for the
programme.
This button allows you to choose between
two different options, depending on the l To reactivate the spin cycle press the
selected programme. button until you reach the spin speed you
would like to set.
- RAPID
l It is possible to modify the spin speed
The button becomes active when you without pausing the machine.
select the RAPID (14'/30'/44') programme
on the knob and allows you to select one
of three durations indicated. An over dosing of detergent can
cause excessive foaming. If the
- STAIN LEVEL appliance detects the presence of
excessive foam, it may exclude the
l Once the programme has been selected spinning phase or extend the duration
the wash time set for that programme will of the program and increase water
be automatically shown. consumption.
TEMPERATURE SELECTION
button CHILD LOCK
l This button allows you to change the l Pressing simultaneously the buttons "F"
temperature of the wash cycles. and "G" for about 3 seconds, the
machine allows you to lock the keys. In
l It is not possible to raise the temperature this way, you can avoid making accidental or
over the maximum allowed for the unwanted changes if a button on the
programme, in order to protect the display is pressed accidently during a cycle.
fabrics.
l The key lock can be simply cancelled by
l If you want carry out a cold wash all the pressing the two buttons simultaneously
indicators must be off. again or turning off the appliance.
17
Digital Display l When START/PAUSE is pressed on
the machine with the door closed, the
The display’s indicator system allows you to indicator will flash momentarily and then
be constantly informed about the status of illuminate.
the machine.
If the door is not properly closed,
1 2 7 8 the light will continue to flash for
about 7 seconds, after which the
start command will be automatically
cancelled. In this case, close the
door in the proper way and press
34 5 6 the START/PAUSE button.
1 2 7 8
l A special safety device prevents the door
from being opened immediately after the
end of the cycle. Wait for 2 minutes after
the wash cycle has finished and the
DOOR LOCKED light has gone out before
345 6
opening the door. At the end of the cycle
turn the programme selector to OFF.
* Depending on model
4) Kg Detector INDICATOR LIGHT
1) OPTIONS INDICATOR LIGHTS (function active only on Cotton and
Synthetics programmes)
The indicator lights show the options that
can be selected by the relevant button. l During the first minutes of the cycle, the
"Kg Detector" indicator will remain on
2) CYCLE DURATION while the intelligent sensor will weigh the
laundry and adjust the cycle time, water
l When a programme is selected the and electricity consumption accordingly.
display automatically shows the cycle
duration, which can vary, depending on l Through every wash phase "Kg Detector"
the options selected. allows to monitor information on the wash
load in the drum and in the first minutes of
l During the initial filling phase of the cycle the wash it:
the machine calculates the actual cycle
time needed based on the load size, - adjusts the amount of water required;
content and options selected. The real
time of the wash will then be displayed. - determines the length of the wash cycle;
This time can recaulculate during the - controls rinsing according to the type of
wash depending on detergent levels and fabric selected to be washed it;
load balancing.
- adjusts the rhythm of drum rotation for
3) DOOR LOCKED INDICATOR LIGHT the type of fabric being washed;
l The indicator light is illuminated when the - recognises the presence of too much
door is fully closed. soap suds, and if necessary, adjust the
amount of rinse water.
Close the door BEFORE selecting the
START/PAUSE button. - adjusts the spin speed according to the
load, thus avoiding any imbalance.
18
5) KEY LOCK INDICATOR LIGHT - ON FOR 1 SECOND, THEN OFF FOR 3
SECONDS: the door is open. Remote
The indicator light show that the keys are
control cannot be activated.
EN
locked.
l For all the information about the
6) Wi-Fi INDICATOR LIGHT functionality and the instructions for an
easy configuration of the Wi-Fi, please
l On models equipped with Wi-Fi, it refer to:
indicates the status of the connection. It go.candy-group.com/sm
could be:
19
Table of programmes
1)
(MAX.) * 1
2
PROGRAMME (see control panel)
(MAX.) 2 1
2)
Cottons 4) 5 6 7 8 9 10 90° ( )
2)
ECO 40-60 5 6 7 8 9 10 60°
2)
Jeans 4) 3 3 3 3 3 3 40°
2)
Synthetics & Coloured 4)
2,5 3 3,5 4 4,5 5 60° ( )
Rinse - - - - - - -
Drain + Spin - - - - - - -
4)
Delicates 59' 2 2 2,5 2,5 2,5 2,5 40°
3)
Rapid 30' 1,5 2 2,5 2,5 2,5 2,5 30°
Mixed & 4)
5 6 7 8 9 10 40°
Coloured 59'
Perfect 4)
59’ 2,5 3 3,5 4 4,5 5 40°
Cotton 59'
4)
Special 49' 2,5 3 3,5 4 4,5 5 40°
49’
20
Please read these notes:
INFORMATION FOR THE TEST
* Maximum load capacity of dry clothes,
EN
LABORATORIES
according to the model used (see control
panel).
STANDARD PROGRAMMES
ACCORDING TO
(Only for models with liquid
(EU) No 1015/2010 e No 1061/2010
detergent compartment)
When only a limited number of ECO 40-60 PROGRAMME
articles have stains which require
SETTING THE TEMPERATURE TO
treatment with liquid bleaching
40°C
agents, preliminary removal of
stain can be carried out in the ECO 40-60 PROGRAMME
washing machine. SETTING THE TEMPERATURE TO
Pour the bleach into the liquid 60°C
bleach container, inserted into the ________________________________________
compartment marked "2" in the
detergent drawer, and set the STANDARD PROGRAMME
special programme RINSE. ACCORDING TO
When this phase has terminated, (EU) No 2019/2023
switch off the appliance, add
the rest of the fabrics and ECO 40-60 PROGRAMME
proceed with a normal wash on
the most suitable programme.
21
Description of programmes Jeans
This programme has been designed to
To clean different types of fabrics and have the highest quality cleaning of fabrics
various levels of dirt, the washing machine such as denim: ideal for removing dirt
has specific programs to meet every need without affecting the elasticity of the fibers.
of washing (see table of programmes).
Wool/Hand Wash
Choose programme in accordance This programme performs a wash cycle
with the laundry instructions appearing dedicated to the wool fabrics that can be
on labels, especially the maximum washed in a washing machine, the articles
recommended temperature. to be washed by hand or laundry items
made from silk or specified as "Wash as
Silk" on the fabric label.
WARNING: Synthetics & Coloured
IMPORTANT WASH PERFORMANCE
This programme allows you to wash
ADVICE.
different type’s fabrics and different colours
l New, coloured garments should be all together. The rotation movement of the
washed separately for at least 5 or 6 drum and the water levels are optimized,
washes. both during the washing the rinsing phase.
The accurate spin action, ensures a
l Certain large dark items such as reduced formation of creases in the fabrics.
jeans and towels should always be
washed separately.
Rinse
l Never mix NON COLOURFAST fabrics. This programme performs 3 rinses with an
intermediate spin (which can be reduced or
excluded by using the appropriate button). It
REMOTE CONTROL (Wi-Fi) is used for rinsing any type of fabric, for
Position that you have to select when you example after a wash carried out by hand.
want to enable / disable remote control
through the App, via Wi-Fi. In this case, the Drain + Spin
start of cycle will take place through the App The programme completes the drain and a
commands. More details in the REMOTE maximum spin. It is possible to delete or
CONTROL (Wi-Fi) section. reduce the spin through the SPIN
SELECTION button.
Cottons
This programme is suitable for washing
coloured cotton garments at 40°C or for Delicates 59'
ensuring the highest degree of cleanliness for Developed to wash and treat delicate
cotton resistant laundry washing at 60°C or garments and precious fabrics. This
90°C. The final spin is at maximum speed that programme washes at a low temperature
ensures excellent water removal. for 59 minutes. Recommended for small
loads.
ECO 40-60
The ECO 40-60 programme is able to clean Sport Plus 39'
normally soiled cotton laundry declared to Created to remove dirt from technical
be washable at 40°C or 60°C, together in garments used in the gym and for sports.
the same cycle. This programme is used The programme washes for 39 minutes at a
to assess the compliance with the EU low temperature.
Ecodesign legislation (environmentally Recommended for small loads of synthetic
friendly products design). garments.
22
Hygiene Plus 59' washing at medium temperature, this
This programme offers the best possible programme is recommended for laundry
combination of high temperature, time and that is not particularly dirty.
EN
cleaning action to guarantee maximum
sanitising power against bacteria in only 59 *Preset temperature of 20°C (modifiable
minutes. Recommended for cotton laundry, by the relevant button). The washing
it washes at a temperature of 60°C and is cycle is also suitable for washing cotton
best used with small loads. fabrics.
23
9. TROUBLESHOOTING AND WARRANTY
If you believe the washing machine is not working correctly, consult the quick guide
provided below which includes some practical tips on how to fix the most common
problems.
l Models with a display: the error is shown by a number preceded by the letter “E”
(example: E2 = Error 2).
l Models without display: an error is shown by a sequence of flashes of every LED.
The error code is shown by the number of flashes followed by a pause of 5 seconds
(example: two flashes – pause 5 seconds – two flashes – repeating = Error 2).
24
OTHER ANOMALIES
EN
The washing machine Make sure the product is plugged into a working supply socket.
does not work / start Make sure power is on.
Make sure the wall socket is working, testing it with another
appliance such as a lamp.
The door may not be correctly closed: open and close it again.
Check whether the required program was correctly selected and the
start button pressed.
Make sure the washing machine is not in pause or time delay mode.
Water leaked on the This may be due to a leak from the seal between the tap, supply
floor near the hose and fill valve; in this case, replace it and tighten the hose
washing machine connections correctly.
Make sure the front filter is correctly closed.
The washing machine The machine is fitted with a detection system that protects the load
does not spin and product from damage if the load is not balanced before spinning.
This may result in:-
• The machine attempts to balance the load, increasing the time of
spin.
• Reduction of the speed of spin to decrease vibrations and noise.
• The spin cycle aborting to protect the machine and load.
If this is experienced remove the load de-tangle it, reload it and
restart the spin program.
This could be due to the fact that water has not been completely
drained: wait a few minutes. If the problem persists, see Error 3
section.
Some models include a "no spin" function: make sure it is not
selected.
Check which options are selected and their effect on the spin cycle.
Excessive detergent can impede the spin cycle, ensure the correct
amount of detergent is being used.
Strong vibrations / The washing machine may not be fully levelled: if necessary, adjust
noises are heard the feet as indicated in the specific section.
during the spin cycle Make sure transport screws, rubber bungs and spacer tubes were
removed.
Make sure there are no foreign objects inside the drum (coins,
hinges, buttons, etc…).
25
It is always recommended to use original
spare parts, that are available at our By placing the mark on this
Authorised Customer Service Centres. product, we are confirming compliance
to all relevant European safety, health
and environmental requirements which
Warranty are applicable in legislation for this
The product is guaranteed under the product.
terms and conditions stated on the
certificate included with the product. The
certificate has to be stored so as to be
shown to the Authorized Customer
Service Centre in case of need. You can The manufacturer declines all
also check the warranty conditions on responsibility for any printing errors in
our web site. To obtain assistance, the booklet included with this product.
please fill in the form on-line or contact Moreover, it also reserves the right to
us at the number indicated on the make any changes deemed useful to its
support page of our web site. products without changing their
essential characteristics.
26
fkhldsk
- CO/CSO 3D/3T E -
20.04 - 43035379 - IDM s.r.l.