Professional Documents
Culture Documents
Modular skid mounted dozer trap module constructed to modern OHS, operational and maintenance standards,
for loading yard conveyors from 2.5m RL. Very robust construction, grizzly protected, with easy access for
cleaning, and simplified maintenance requirements.
Adjustable bed depth to handle ore variation, automated hydraulic belt tensioning / take-up system, modular
bolted UHMWPE chute panels for long life and low wall friction, optionally with ceramic linings to suit highly
abrasive ores.
Comes complete with crowned pulleys, s/s primary, secondary and return scrapers, and belt splicing station,
making these units very easy to live with. Using fabric belts to suit ores such as bauxite, salt and sand; well suited
to use with iron ore and most heavy / lumpy / rock ores, using a steel cord belt on the conservatively sized pulleys.
The modular structure is fully hot dip galvanised and stainless steel / non-corrosive materials used for all belt
contacting components. Configured with a robust headwall for dozer pushing forces, and an integral rilling-style
side wing-wall, these units can easily be transported to site as ‘flat-packs’, containerised, or sent fully complete,
tested and ready for operation. Quick-remove FEL hopper option available.
Available configured to be fixed to foundations, or fully portable via dozer push points / tow points and rounded
infills to minimise pushing / towing forces. When used in combination with tracked portable radial stackers, they
make for a very efficient stockpile configuration for rapid ship-loading and flexible storage systems.
www.iput.au/dozer
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
ITEM PART NUMBER MASS (KG) QTY.
1 Stockpile Deck Structure Assembly 5456 1
M
Capacity: 1,500 t/hr at 0.31 m/s belt speed and 1.25 bulk density; M
2,500 t/hr at 0.52 m/s and 1.25 bulk density; 2 Stockpile Skeleton Structure Overall Assembly 7709 1
max 3,500 t/hr at 0.5 m/s belt speed and 1.8 bulk density; 3 Stockpile Head Wall Assembly 1208 1
Unladen mass: 48t 4 Stockpile Head Chute Structure - Fixed 2304 1
Belt Feeder: 1,500 mm wide PN1250 4ply belt, 11 degree inclined,
5 Stockpile Drive Platform Assembly 1465 1
Pullies: 830 mm ceramic lagged head, 530 mm ceramic lagged tail
L 9 L
1.8m face width, @14m centres, 6 Stockpile Conveyor Chute Assembly 7403 1
Grizzly: 117 x 34cm aperture; 2.5m high entry point, 4.8m long feed zone 7 Stockpile Head Chute Assembly 2405 1
2 Feeder drive: 75 kW VSD (415V 4 pole motor)
8 Stockpile Wingwall Guarding Assembly 6207 1
3 Ambient de-rating: >45 deg C
9 Stockpile Grizzly - 4.5m 1475 1
4 17161
1929
J 7 J
340
2494
1186
781
H H
1
8
2
1840
1332
3161
G G
11
10
4075
3014
4250
F F
5332
E E
9410
11°
3560
11°
4425
D D
4079
5157
5044
2535
C C
2037
3 0°
298
B B
CLIENT
STANTEC / BCI MINERALS
PROJECT
www.civmec.com.au
STOCKPILE DOZER TRAP RECLAIM FEEDER
TITLE
iPUT STOCKPILE DOZER TRAP
RECLAIM FEEDER ARRANGEMENT
B
A
6/12/22
15/12/21
MECHANICAL INFO ADDED
ISSUED FOR TENDER
VS
PG
VS
VS
FIXED CONFIGURATION
A REV DATE DESCRIPTION
DEBURR AND BREAK ANY SHARP EDGES
BY CHK
DWG NO REVISION
A
DIMENSIONS IN MILLIMETERS UNO TOLERANCES PER ISO2768 Gr M
THIS DRAWING IS THE PROPERTY OF iPUT PTY LTD AND MUST NOT BE
www.iput.com.au 2196-01-A-001 B
COPIED, REPRODUCED OR MANUFACTURED FROM WITHOUT WRITTEN
ALLIANCE PARTNERS STATUS SCALE FIRST DRAWN BY ENG
CONSENT. INFORMATION CONTAINED HEREIN IS COPYRIGHT OF iPUT PTY
LTD T/A iPUT TECHNOLOGIES AND / OR ITS PARTNERS OR SUPPLIERS TENDER 1:40 15/12/2021 PG VS
SHEET
SIZE A1
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
ITEM DESCRIPTION MASS (KG) QTY.
max 3,500 t/hr at 0.5 m/s belt speed and 1.8 bulk density; 3 Stockpile Skeleton Structure Overall
Assembly 7709 1
Unladen mass: 53t 4 Stockpile Head Chute Structure - Mobile 2220 1
Ground pressure: <35 kPa (unladen) ; <50 kPa (laden)
5 Stockpile Drive Platform Assembly 1465 1
Belt Feeder: 1,500 mm wide PN1250 4ply belt, 11 degree inclined,
L 10 Pullies: 830 mm ceramic lagged head, 530 mm ceramic lagged tail 6 Stockpile Underneath Access Step Ladder 40 1 L
1.8m face width, @14m centres, 7 Stockpile Conveyor Chute Assembly 7403 1
Grizzly: 117 x 34cm aperture; 2.5m high entry point, 4.8m long feed zone
8 Stockpile Head Chute Assembly 2405 1
Feeder drive: 75 kW VSD (415V 4 pole motor)
2 Ambient de-rating: >45 deg C 9 Stockpile Wingwall Guarding Assembly 6207 1
J 12801 J
1929
8
H H
340
2494
1186
781
G G
1840
1332
F 11 F
4075
4250
3014
5332
E E
9410
11°
3560
D D
11°
4425
5044
5157
4079
C 6 C
2535
2037
30°
900
409
B B
2825 CLIENT
STANTEC / BCI MINERALS
PROJECT
3571 STOCKPILE DOZER TRAP RECLAIM FEEDER
www.civmec.com.au
6199 TITLE
iPUT STOCKPILE DOZER TRAP
RECLAIM FEEDER ARRANGEMENT
B
A
6/12/22
15/12/21
MECHANICAL INFO ADDED
ISSUED FOR TENDER
VS
PG
VS
VS
MOBILE CONFIGURATION
A REV DATE DESCRIPTION
DEBURR AND BREAK ANY SHARP EDGES
BY CHK
DWG NO REVISION
A
DIMENSIONS IN MILLIMETERS UNO TOLERANCES PER ISO2768 Gr M
THIS DRAWING IS THE PROPERTY OF iPUT PTY LTD AND MUST NOT BE
www.iput.com.au 2196-01-A-002 B
COPIED, REPRODUCED OR MANUFACTURED FROM WITHOUT WRITTEN
ALLIANCE PARTNERS STATUS SCALE FIRST DRAWN BY ENG
CONSENT. INFORMATION CONTAINED HEREIN IS COPYRIGHT OF iPUT PTY
LTD T/A iPUT TECHNOLOGIES AND / OR ITS PARTNERS OR SUPPLIERS TENDER 1:40 15/12/2021 PG VS
SHEET
SIZE A1
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1