Professional Documents
Culture Documents
l. Scope:
This technical specitication deflnes the requircnlents lirr thc quality o1'billet. This specification covers
manufbcturing, testing and inspection procedure fbr steel grade billets in the fbllor'ving sections:
Grade: C18MMn C
Quantity: - -
4. Metallurgical requirements:
a N/A tbr as cast product.
5. Dimensional Tolerance :
Dirnensional tolerance shall be as fbllows:
Size + 5mm max ( aim +/- 3 mm)
[,ength tolerance +100.0 mm
Corner radius l0 mm max
Straightness 5 mm/m or max 60mm over entire length.
Rhomboidity l0 mm max
Convexity/Concavity 5mm max
Cuttine E,nd should be gas flame cut
Short length
6. Surface Condition :
. Billets to be t'ree ol'harmlul detbct such as laps. dcep oscillation marks (>l.0rnm dcpth). scabs. scratchcs. sharp
edges, cracks and pinholes, depression, bleed or any surthce del-ects that can attect the turther rolling to end
product.
7 . I nternal Quality :
. Billets u,ill be fiee olany harmlul internal delbcts such as pin holes. pipes, contraction. cavities. cracks. inclusion"
refiactories/slag entrapment that can atii:ct the further rolling to end prclduct.
8. Mechanical Properties:
a N/A lbr as cast product.
9. Test Certificate:
r.s /91
ol
i3
orl
,6!
u s-')il
Krva6eP
JINDAL STEEL & POWtsR LIMITED
DOC. NO. : ]'DC/JSPL/AN GULI BLI 963
TECHNICAL DELIVERY 221
il. Packing: Total billets will be supplied in bare and loose condition.
Annexure-l
C18MMn C c Mn P S Si Cu Ni Cr Mo AI N-ppm CE
\--zr
!,VaceDl