Professional Documents
Culture Documents
represents Hexa which means six. It comes with various benefits and
features. These ICs are mainly used as amplifiers for analog converters
However, you may still be concerned about why they act as an essential
component in many devices and how it functions. This article gives you a
Table of Contents
Let’s look into some types of hex drivers along with their functions and
roles. Hex IC-4069 contains hex means six in total circuits. This type of
not require features of medium power source TTL drives and logic-level
converters.
output signals.
The IC-7407 acts as a hex buffer that contains collector outputs. This hex
The IC-7405 consists of an open collector and output of high voltage. This
Hex Inverter
in digital logic gates. As it takes the input values and gives back the output
value. This implies that if the input is of high logic, it returns the value of
· Oscillators
generating square waves, sine waves, and clock signals. The circuit of the
a resistor. The capacitor starts charging and discharging over the power
supply over the determined rate by the capacitor and resistor values.
or clock signal.
· Data Transmission
transmission which convert the digital signals from one level of voltage to
voltage of transmitted signals can vary between -12 volts to +12 volts.
logic levels. The hex inverter integrated circuits make it possible to convert
· Signal Conditioning
The hex inverter Integrated can also feature in signal conditioning PCBs to
convert the signals from analog to digital form. For instance, the hex
the analog signal form to a digital form. The comparator gives an output
value that goes into a hex inverter integrated circuit. There, it inverts the
· Power Management
The Hex inverter Integrated Circuits are also used in the management of
the circuit’s power, which controls the voltage supply to all other electronic
and push outputs. Its pins have lower-power Schottky which enhances the
diodes that protects the input pins from higher input Vcc. The diodes
and ROHS compliant and found in packages like TSSOP-14 and SO-14.
Moreover, it possesses a voltage range of 5.5 volts to 4.5 volts, along with
higher input voltage and 0.8 volts of minimum value of low input voltage.
Schmitt trigger.
As this IC has NOT gates, t shows that it has specific output and input
power source. Then connect pin 8 with the ground. And it starts working.
switching time. It refers to the period in which an output pin switches the
type of input signals into another form. The propagation delay of this
module is 29ns. This makes it ideal for several devices, which include
waves.
The Hex inverter 4049 Integrated circuit also acts as an inverter buffer
with six or hex NOT gates. It is widely used in the Converter of CMOS TTL.
The IC-4049 uses a voltage multiplier PCB and creates the max input value
and SOIC. Additionally, the max sink current of the module can rise to 2
Nevertheless, a double voltage circuit does not only convert Direct Current
Therefore, these circuits become useful for devices that are concerned
immunity.
and uses cases. It is used for pulse framing and logic reversal. Moreover, it
oscillators.
1. 74HC04
The CMOS-based 74HC04 hex inverter Integrated circuit works within the
higher noise immunity. All these features make IC-74HC04 ideal for
2. CD4049
the range of voltage of 18 volts to 3 volts. This IC offers features like higher
3. SN74LS04
The TTL-based IC SN74LS04 hex inverter IC works within the voltage limit
4. 74HC14
and 2 volts. It offers features like the input of Schmitt trigger, low
make this hex inverter IC ideal for digital consumer devices. Moreover, it
output current.
5. CD4069
higher input impedance. This makes it ideal for use in digital consumer
electronic devices. Moreover, it has a max value of current output, six mA,
6. SN74HC04
within the voltage of 6 volts and 2 volts. However, it offers features like a
greater noise immunity. These features enable this IC inverter best for
7. 74LS04
voltage of 5.25 Volts and 4.75 Volts. It offers features like low consumption
of power, greater capability of output drive, and high speed. Thus making
8. CD74HC04
between the voltage value of 6 Volts and 2 Volts. The features like high
9. MC14069
the voltage level of 18 volts and 3 volts. Features like the high capability of
6 mA.
10. 74HC240
the voltage level of 6 volts and 2 volts. It serves as a line driver or a buffer
11. CD74LS04
the voltage level of 5.25 volts and 4.75 volts. Its low consumption of power,
high capability of output drive, and high speed make it perfect to use in
12. 74ACT04
the voltage level of 5.5 Volts to 4.5 Volts. It offers features like low
propagation delay.
Conclusion
few factors while choosing the right Hex IC inverter. These factors include
power.
Related Posts:
https://www.raypcb.com/hex-inverter-ic/