Professional Documents
Culture Documents
03 Sheet
03 Sheet
1- What is the difference between serial and parallel transfer? Explain how to convert serial
data to parallel and parallel data to serial. What type of register is needed?
2- The bit sequence 0010 is serially entered (right-most bit first) into a 4-bit parallel out shift
right register that is initially clear. What are the Q outputs after two clock pulses?
3- Assume that a 4-bit serial in/serial out shift register is initially clear. We wish to store the
nibble 1100. What will be the 4-bit pattern after the second clock pulse? (Right-most bit
first).
4- A serial in/parallel out, 4-bit shift register initially contains all 1s. The data nibble 0111 is
waiting to enter. What is the register contains after four clock pulses.
5- The bit sequence 10011100 is serially entered (right-most bit first) into an 8-bit parallel out
shift register that is initially clear. What are the Q outputs after four clock pulses?
6- The group of bits 11001 is serially shifted (right-most bit first) into a 5-bit parallel output
shift right register with an initial state 01110. what is the register contains after three clock
pulses.
7- Draw the 5-bit Serial-in/Serial out Shift Register and its states for the data input and clock
waveforms shown in Figure. The register is initially cleared (all 0s).
8- The contents of a 4-bit register are initially 1101. the register is shifted six times to the
right with the serial input being 101101 (right-most bit first). What is the content of the
register after each shift?
1
10- The contents of a 5-bit register are initially 10101. the register is shifted five times to the
lift with the serial input being 10011(right-most bit first). What is the content of the
register after each shift?
11- Draw the 5-bit Parallel-in/Serial out Shift Register and its logic symbol.
****************************************