Professional Documents
Culture Documents
TP 1320
4
For more scale apperance, use a hobby knife to
cut the upper and lower inlet leading edges to
Scale in inches the downward-sloping angles shown here
2
ls recommended.
Apply generous filler (lightweight spackling) Tail booms made from laminated
and to create large fillets in these areas foam carved to shape (see
photos of the real F/A-22 for
guidance with shaping)
Sand all wing and empennage leading edges round
and apply a piece of 3M Satin tape around the
leading edge to add smoothness and durability
Rx F4
F1
F3
TP 1320 F2
F1 F2 F4
F3
Turtledeck
Apply generous filler (lightweight
spackling) to create large
fillets in this area
ood stick
er than the LSPJ, T2 T3 T4
e plates to ensure T5
is aligned with the
ain on the servo)