Professional Documents
Culture Documents
6 VOLT
PHYSICAL SPECIFICATIONS
MODEL NAME TERMINAL TYPE D DIMENSIONS B INCHES (mm) WEIGHT E LBS. (kg) HYDROLINK OR SPWK HANDLES
ELECTRICAL SPECIFICATIONS
VOLTAGE CAPACITY A AMP-HOURS (Ah) ENERGY (kWh)
120 50
5000
40
100
4500
30
80
Temperature (F)
4000
(C)
20
Temperature (C)
Temperature (F)
60
Temperature
3500 10
40
Number of Cycles
0
Number of Cycles
3000 20
-10
2500 0
-20
-20 -30
2000
-40 -40
1500 0% 20% 40% 60% 80% 100% 120%
Percentof
Percent of Available
Available Capacity
Capacity
1000
500
0
20% 30% 40% 50% 60% 70% 80%
Depth of Discharge
EXPECTED LIFE VS. TEMPERATURE
Depth-of-Discharge
70 2.06
State of Charge %
60 2.04
*PERIODIC CHARGE
50 2.02
75°F (24°C) FREQUENCY
40 1.99
Provide a periodic freshening charge to maintain a SOC greater than the
30 1.97 threshold of 70%.
20 1.94
85°F (29°C)
10 1.92
0 2 4 6 8 10 12 14 16 18 20
7.13 7.13
E E (181) (181) E
10.30 WIDTH
10.30 WIDTH
(262) (262)
5/16"-18 .47 5/16"-18 .47
LENGTH 7 LENGTH
STAINLESS STEEL 6 5 STAINLESS STEEL4 3
NOTES: UNLESS OTHERWISE SPECIFIED ZONE DESCRIPTION
INITIAL RELEASE; ECO2693
1. DIMENSIONS ARE REFERENCE ONLY NEW CASE STYLE; ECO2997
H
D D CORRECT COVER DIMS; MODIFY NOTE 1; ECO3079
D
2.79
1.79
G
C C 10.74 10.74
C
9.69 (273)9.69 (273)
(246) (246)
HEIGHT HEIGHT
F
B
B B
10.30 TITLE
WIDTH
RETURNED ON DEMAND
A A (262)
UNLESS OTHERWISE
SPECIFICED
6V (T105, 5/16"-18T125, T605) BAYONET.47 UNLESS OTH
SPECIFIC
LENGTH
TOLERANCES ARE:
STAINLESS ELPTSTEELBATTERY ASSEMBLY TOLERANCE
BP DP CS
DWN BY SCALE CHK APPVD
X.X ı#0.02" CSIZE=DWG SCALE
X.X ı#0.02"
X.XX ı#0.01" X.XX ı#0.01"
X.XXX ı#0.005" DATE DWG NO REV X.XXX ı#0.005"
7 6 5 7 4 6 3 5
ANGL ES = ı #0 ı 3$0 '
4 03-23-11 720429 3 C
ANGL ES = ı #0 ı 3$0 '
UNCONTROLLED COPY WHEN DOWNLOADED or PRINTED- UNCONTROLLED COPY WHEN DOWNLOADED or PRINTED-
Check MASTER DOCUMENT LOG to verify that this document/drawing is current prior to use D
Check MASTER DOCUMENT LOG to verify that this document/drawing is current prior to use
C 10.74
9.69 (273)
(246) HEIGHT
TERMINAL CONFIGURATIONSD
1 ELPT EMBEDDED LOW PROFILE
B TERMINAL
7 6 5 4 3
A
A. The amount of amp-hours (Ah) a battery can deliver when discharged at a constant rate at 86°F (30°C) for all rates and C. Height taken from bottom of the battery to the highest point on the battery. Heights may vary depending on type of terminal.
maintain a voltage above 1.75 V/cell. Capacities are based on peak performance. D. Terminal images are representative only.
B. Dimensions may vary depending on type of handle or terminal. Batteries should be mounted with 0.5 inches E. Weight may vary.
(12.7 mm) spacing minimum.
TROJAN BATTERY
COMPANY WITH
QUALITY SYSTEM
Designed in compliance with applicable BCI, DIN, BS and IEC standards.
CERTIFIED BY DNV
= ISO 9001:2015 =
Tested in compliance to BCI and IEC standards.
© 2019 Trojan Battery Company, LLC. All rights reserved. Trojan Battery Company is not liable for damages that may result from any information provided in or omitted
from this publication, under any circumstances. Trojan Battery Company reserves the right to make adjustments to this publication at any time, without notice or obligation.