This document provides formulas and definitions for calculating building parameters:
1) PSO is the percentage of site occupancy calculated as the allowable maximum building footprint divided by the total lot area.
2) MACA is the maximum allowable construction area calculated as the PSO maximum plus the impervious surface area minimum.
3) TGFA is the total gross floor area calculated as the allowable maximum building footprint multiplied by the building height limit.
This document provides formulas and definitions for calculating building parameters:
1) PSO is the percentage of site occupancy calculated as the allowable maximum building footprint divided by the total lot area.
2) MACA is the maximum allowable construction area calculated as the PSO maximum plus the impervious surface area minimum.
3) TGFA is the total gross floor area calculated as the allowable maximum building footprint multiplied by the building height limit.
This document provides formulas and definitions for calculating building parameters:
1) PSO is the percentage of site occupancy calculated as the allowable maximum building footprint divided by the total lot area.
2) MACA is the maximum allowable construction area calculated as the PSO maximum plus the impervious surface area minimum.
3) TGFA is the total gross floor area calculated as the allowable maximum building footprint multiplied by the building height limit.
ISA = hardscape USA = Softscape MACA = PSOmax + ISAmin TOSL = ISA+USA GFA = FLAR x BHL TGFA = AMBF x BHL TGFA = AMBF x (No. of Floors (including roof deck))
AMBF= Allowable Maximum Building Footprint
PSO= Percentage of Site Occupancy (%) TLA= Total Lot Area (with or without firewall) TOSL= Total Open Space within Lot (%) ISA= Impervious Surface Area (%) USA=Unpaved Surface Area (%) MACA= Maximum Allowable Construction Area GFA= Gross Floor Area FLAR=Floor-Lot Area Ratio BHL=Building Height Limit TGFA=Total Gross Floor Area Building Bulk= Volume of the Building AMVB= Allowable Maximum Volume of Building OFB= Outermost Faces of Building WEIGHT: Water = 1000kg/m3 Concrete = 2400kg/m3 Steel = 7850kg/m3 Use 40kg/ bag (standard @ philippines) 10mmØ = 0.617kg/m (linear meter) Mortar Mixture (Per m2) or (per Area) = Splice Allowance: x (1.067) or 6.7% 12mmØ = 0.888kg/m (linear meter) = Splice Allowance: x (1.075) or 7.5% 16mmØ = 1.580kg/m (linear meter) = Splice Allowance: x (1.092) or 9.2% Use 40kg/ bag (standard @ philippines)
Plastering Mixture (Per m2) or (per Area)
Board ft: = thk(in)+width(in)+length(ft) 12 Use 40kg/ bag (standard @ philippines)