Professional Documents
Culture Documents
Prestart Checklist
Download HSE Docs hseprof.com
Supplier Verification & Plant Details Verify Check CAB Verify Check WARNING DEVICES
Cleanliness • Horn
Plant Supplier Seat Condition OK • Reversing Alarm
Operator Restraint Provided
Phone Number Instruments Operational & Labelled WARNING SIGNS (In Cabin)
Verify Check
Levers / Controls Operational
Plant Make Pedals in Good Condition SEAT BELTS
ROPS (Roll Over Protective Structure)
Plant Model Windows / Wipers / Washers Verify Check
Signature:
Date
This is to certify that the plant being supplied conforms to the relevant HSE Legislation, and the requirements as detailed above. HSE Department will assess this Pre-start Checklist to ensure the supplier has verified compliance to HSE Legislative requirements and, to
register the plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from
commencing work on the site until the non-compliance is rectified. HSE Management will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.
This form does not remove any liability for the plant supplier to conform with the relevant HSE Legislation
Form: HSE-INSP-0002
Prestart Checklist
Download HSE Docs hseprof.com
Supplier Verification & Plant Details Verify Check CAB Verify Check WARNING DEVICES
Cleanliness • Horn
Plant Supplier Seat • Amber Flashing Beacon
Operator Restraint • Reversing Alarm
Phone Number Instruments & Labelling
Levers / Controls WARNING SIGNS (In Cabin)
Verify Check
Plant Make Pedals
ROPS (Roll Over Protective Structure) SEAT BELTS
Plant Model Windows / Wipers / Washers Verify Check
Verify Check
Rear View Mirrors DANGER – BEWARE OVERHEAD WIRES
Plate No. SWL & UNDERGROUND SERVICES
Crane Chart
Name
Verify Check
Verify Check
Signature: Exhaust
Pivots
Verify Check
Date Connecting Rods
Safety Pins Engine Guarding
(no excessive wear)
Verify Check
Verify Check
SWL
Plant to conform to manufacturer’s specifications and HSE Regs. Quick Hitch
Plant Operator is to provide daily checksheets to HSE. Safety Pins SWL Verify Check
Where applicable, Personal Protective Equipment must be worn. (where applicable)
Plant Log Book Detailing service history in accordance with Connecting Rods
Manufacturer’s specifications should be written legibly in & Safety Pins
English. Verify Check Hydraulics
Contractor must produce proof of competence of operator, e.g.,
Certificate of Competence, Licence, Detailed Log Book Rams
Hoses Verify Check
Connections Travelling Hitch
(check for excessive
HSE Use Only wear and leaks) Hydraulics Verify Check
This is to certify that the plant being supplied conforms to the relevant HSE Legislation, and the requirements as detailed above. HSE Department will assess this Pre-start Checklist to ensure the supplier has verified compliance to HSE Legislative requirements and, to
register the plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from
commencing work on the site until the non-compliance is rectified. HSE Management will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.
This form does not remove any liability for the plant supplier to conform with the relevant HSE Legislation.
Form: HSE-INSP-0003
Prestart Checklist
Download HSE Docs hseprof.com
Supplier Verification & Plant Details Verify CAB Verify Check WARNING DEVICES
Cleanliness • Horn
Plant Supplier Seat Condition OK • Reversing Alarm
Operator Restraint Provided
Phone Number Instruments Operational & Labelled WARNING SIGNS (In Cabin)
Verify Check
Levers / Controls Operational
Plant Make SEAT BELTS
Pedals in Good Condition
Verify Check
ROPS (Roll Over Protective Structure)
Plant Model Windows / Wipers / Washers
DANGER – SAFE WORKING LIMITS
Rear View Mirrors ON BATTERS
Serial No.
Operator Instruction
Ratio 2 to 1
Name (available on plant) Eg only – As per Manufacturers Specifications
This is to certify that the plant being supplied conforms to the relevant HS&E Legislation, and the requirements as detailed above. HSE Department will check this Pre-start Checklist to ensure the supplier has verified compliance to Legislative requirements and, to
register the plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from
commencing work on the site until the non-compliance is rectified. HSE Management will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.
This form does not remove any liability for the plant supplier to conform with the relevant HSE Legislation
Form: HSE-INSP-0004
Prestart Checklist
Download HSE Docs hseprof.com
This is to certify that the plant being supplied conforms to the relevant HSE Legislation, and the requirements as detailed above. HSE Department will check this Pre-start Checklist to ensure the supplier has verified compliance to HSE Legislative requirements and, to
register the plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from
commencing work on the site until the non-compliance is rectified. HSE Management will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.
This form does not remove any liability for the plant supplier to conform with the relevant HSE Legislation
Form: HSE-INSP-0005
Prestart Checklist
Download HSE Docs hseprof.com
Supplier Verification & Plant Details Verify CAB Verify Check WARNING DEVICES
Cleanliness • Horn
Plant Supplier Seat Condition OK • Reversing Alarm
Operator Restraint Provided
Phone Number WARNING SIGNS (In Cabin)
Instruments Operational & Labelled Verify Check
Levers / Controls Operational
SEAT BELTS
Plant Make Pedals in Good Condition
Verify Check
ROPS (Roll Over Protective Structure)
Plant Model DANGER – SAFE WORKING LIMITS ON BATTERS
Windows / Wipers / Washers
Rear View Mirrors
Serial No. Ratio 4 to 1
Operator Instruction Eg only – As per Manufacturers Specifications
Name (available on plant)
Verify Check
Signature: Locating lock for Verify Check
Low/Neutral/Lower Range
Pad lock provided Exhaust
Date
Warning sign – Hasp must be
locked in position before
operating Verify Check
Plant to conform to manufacturer’s specifications and HSE Plant Engine Guarding
Regs.
Plant Operator is to provide daily checksheets to HSE.
Where applicable, Personal Protective Equipment must be worn.
Plant Log Book Detailing service history in accordance with Verify Check
Manufacturer’s specifications should be written legibly in
English. Tyres
Contractor must produce proof of competence of operator, e.g., Wheels
Certificate of Competence, Licence, Detailed Log Book
Brakes
Park Brake
This is to certify that the plant being supplied conforms to the relevant HSE Legislation, and the requirements as detailed above. HSE will assess this Pre-start Checklist to ensure the supplier has verified compliance to Legislative requirements and, to register the plant
onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from commencing work on the site
until the non-compliance is rectified. HSEManagement will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.
This form does not remove any liability for the plant supplier to conform with the relevant HSE Legislation
Form: HSE-INSP-0006
Supplier Verification & Plant Details Verify Check WARNING DEVICES Verify Check BASKET
• Horn Cleanliness
Sub-con name • Amber Flashing Beacon Operator Restraint
• Motion Alarms Instruments & Labelling
Phone Number • Raise & Lower Alarms Levers / Controls
• Out of Level Alarm Pedals
Plant Make Log Book
Deadman Switch
Plant Model Operation Instruction
Verify Check Hydraulics (available on plant)
Serial No. Rams Verify Check
Hoses
Name Connections SWL / Crane Chart
(check for excessive Verify Check
Signature: Wear and leaks) WARNING SIGNS Safety Harness & Lanyard
Verify Check Verify Check
Date Pivots Harness Available
Connecting Rods
Verify Check
Safety Pins DANGER – BEWARE OVERHEAD WIRES
(no excessive wear) &SERVICES
Plant to conform to manufacturer’s specifications and HSE Plant
Regs. Verify Check Hydraulics Verify Check
Plant Operator is to provide daily checksheets to HSE.
Where applicable, Personal Protective Equipment must be worn. Exhaust Rams
Plant Log Book Detailing service history in accordance with (if applicable)
Manufacturer’s specifications should be written legibly in
Hoses
English. Connections
Contractor must produce proof of competence of operator, e.g., Verify Check
Certificate of Competence, Licence, Detailed Log Book (check for excessive wear,
Levers / Controls Verify Check leaks and creep)
Engine Guarding
This is to certify that the plant being supplied conforms to the relevant HSE Legislation, and the requirements as detailed above. HSE Department will assess this Pre-start Checklist to ensure the supplier has verified compliance to Legislative requirements and, to
register the plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from
commencing work on the site until the non-compliance is rectified. HSE Management will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.
This form does not remove any liability for the plant supplier to conform with the relevant HSE Legislation
Form: HSE-INSP-0007
Supplier Verification & Plant Details Verify Check WARNING DEVICES Verify Check BASKET
• Horn Cleanliness
Plant Supplier Verify Check • Amber Flashing Beacon (when onsite) Instruments & Labelling
Levers / Controls • Reversing Alarm Levers / Controls Basket & Base
Phone Number • Head, Tail & Turn Indicators Pedals
Verify Check Log Book
Plant Make
Self Closing Gate Operation Instruction
(available on plant)
Plant Model
Verify Check
Serial No.
Safety Working Load
Name
Signature:
Verify Check
Date Pivots Verify Check
Connecting Rods WARNING & RESTRICTION SIGNS
Safety Pins
(no excessive wear)
Plant to conform to manufacturer’s specifications and HSE Plant
Regs.
Plant Operator is to provide daily checksheets to HSE. Verify Check Hydraulics
Where applicable, Personal Protective Equipment must be worn. Verify Check Verify Check
Plant Log Book Detailing service history in accordance with Rams
Manufacturer’s specifications should be written legibly in Safety Prop Guarding Of
Hoses
English. Under Scissor Scissor
Contractor must produce proof of competence of operator, e.g., Connections
Certificate of Competence, Licence, Detailed Log Book (check for excessive Verify Check
Wear and leaks)
Exhaust
(if applicable)
HSE Use Only Verify Check
Tyres
NOTE: Sign only when all items have been checked Wheels
Brakes
Plant Check By:
Park Brake
Position:
Instructions:
Date: / / Verify Check
Verify Box to be ticked by Owner / Supplier / Operator prior to arrival onsite.
Engine Guarding Check Box to be ticked after visual inspection by HSE Department
This is to certify that the plant being supplied conforms to the relevant HSE Legislation, and the requirements as detailed above. HSE Department will assess this Pre-start Checklist to ensure the supplier has verified compliance to HSE Legislative requirements and, to
register the plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from
commencing work on the site until the non-compliance is rectified. HSE Management will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.
This form does not remove any liability for the plant supplier to conform with the relevant HSE Legislation
Form: HSE-INSP-0008
Prestart Checklist
Download HSE Docs hseprof.com
This is to certify that the plant being supplied conforms to the relevant HSE Legislation, and the requirements as detailed above. HSE will assess this Pre-start Checklist to ensure the supplier has verified compliance to Legislative requirements and, to register the plant
onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from commencing work on the site
until the non-compliance is rectified. HSE Management will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.
This form does not remove any liability for the plant supplier to conform with the relevant RoK OH&S Legislation
Form: HSE-INSP-0009
Prestart Checklist
Download HSE Docs hseprof.com
Supplier Verification & Plant Details Verify Check CAB Verify Check WARNING DEVICES
Cleanliness • Horn
Plant Supplier Seat Condition OK • Amber Flashing Beacon
Operator Restraint Provided • Reversing Alarm
Phone Number Instruments Operational & Labelled
Levers / Controls Operational WARNING SIGNS (In Cabin)
Verify Check
Plant Make Pedals in Good Condition
SEAT BELTS
ROPS (Roll Over Protective Structure)
Plant Model Windows / Wipers / Washers Verify Check
This is to certify that the plant being supplied conforms to the relevant HSE Legislation, and the requirements as detailed above. HSE Department will assess this Pre-start Checklist to ensure the supplier has verified compliance to HSE Legislative requirements and, to
register the plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from
commencing work on the site until the non-compliance is rectified. HSE Management will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.
This form does not remove any liability for the plant supplier to conform with the relevant HSE Legislation
Form: HSE-INSP-0010
Date:
Supplier Verification & Plant Details Verify Check CAB Verify Check WARNING DEVICES
Cleanliness
• Horn
Plant Supplier Seat Condition OK • Amber Flashing Beacon
Operator Restraint Provided • Reversing Alarm
Phone Number Instruments Operational & Labelled
Levers / Controls Operational WARNING SIGNS (In Cabin)
Verify Check
Plant Make Pedals in Good Condition
SEAT BELTS
ROPS
Plant Model Windows / Wipers / Washers Verify Check
Rear View Mirrors DANGER – BEWARE OVERHEAD WIRES
Serial No.
Operator Instruction Verify Check
Name (available on plant) Exhaust
Verify Check
Signature: Verify Check
Pivots
Connecting Rods Engine Guarding
Date
Safety Pins
(no excessive wear)
Verify Check
Plant to conform to manufacturer’s specifications and HSE Plant Tyres
Regs.
Plant Operator is to provide daily checksheets to HSE. Verify Check Hydraulics Wheels
Where applicable, Personal Protective Equipment must be worn. Brakes
Plant Log Book Detailing service history in accordance with Rams
Manufacturer’s specifications should be written legibly in Hoses Park Brake
English.
Contractor must produce proof of competence of operator, e.g., Connections
Certificate of Competence, Licence, Detailed Log Book (check for excessive
Wear and leaks)
Verify Check
Handrails
HSE Use Only Steps
Verify Check Crush Point Hazard Verify Check
NOTE: Sign only when all items have been checked Sign displayed both
SWL if used as Crane sides
Lift point
Plant Check By:
Position:
Instructions:
Date: / / Verify Box to be ticked by Owner / Supplier / Operator prior to arrival onsite.
Note : Register if to be used on Public Roads
Check Box to be ticked after visual inspection by HSE Department
This is to certify that the plant being supplied conforms to the relevant HSE Legislation, and the requirements as detailed above. HSE Department will check this Pre-start Checklist to ensure the supplier has verified compliance to HSE Legislative requirements and, to
register the plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from
commencing work on the site until the non-compliance is rectified. HSE Management will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.
This form does not remove any liability for the plant supplier to conform with the relevant HSE Legislation
Form: HSE-INSP-0011
Prestart Checklist
Download HSE Docs hseprof.com
Supplier Verification & Plant Details Verify Check CAB Verify Check WARNING DEVICES
Cleanliness
• Horn
Plant Supplier Seat Condition OK
• Amber Flashing Beacon
Operator Restraint Provided
Instruments Operational & Labelled • Reversing Alarm
Phone Number
Levers / Controls Operational
WARNING SIGNS (In Cabin)
Plant Make Pedals in Good Condition Verify Check
Verify Check Boom ROPS (Roll Over Protective Structure)
Plant Model Pivots SEAT BELTS
Windows / Wipers / Washers
Connecting Rods Rear View Mirrors Verify Check
Serial No. Safety Pins Operator Instruction DANGER – BEWARE OVERHEAD WIRES,
(no excessive wear) (available on plant) PIPES and SERVICES
Name Log Book
SWL / Crane Chart
Signature:
This is to certify that the plant being supplied conforms to the relevant HSE Legislation, and the requirements as detailed above. HSE Department will check this Pre-start Checklist to ensure the supplier has verified compliance to Legislative requirements and, to
register the plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from
commencing work on the site until the non-compliance is rectified. HSE Management will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.
This form does not remove any liability for the plant supplier to conform with the relevant Legalisation
Form: HSE-INSP-0012
Prestart Checklist
Download HSE Docs hseprof.com
Verify Check
Handrails
Plant to conform to manufacturer’s specifications and Vic Plant
Regs. Steps
Plant Operator is to provide daily checksheets to HSE Where
applicable, Personal Protective Equipment must be worn.
Plant Log Book Detailing service history in accordance with
Manufacturer’s specifications should be written legibly in
English.
Contractor must produce proof of competence of operator, e.g.,
Certificate of Competence, Licence, Detailed Log Book
Verify Check
Tyres
Wheels
HSE Use Only Park Brake
This is to certify that the plant being supplied conforms to the relevant HSE Legislation, and the requirements as detailed above. HSE Department will assess this Pre-start Checklist to ensure the supplier has verified compliance to HSE Legislative requirements and, to
register the plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from
commencing work on the site until the non-compliance is rectified. HSE Management will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.
This form does not remove any liability for the plant supplier to conform with the relevant HSE Legislation
Form: HSE-INSP-0013
Prestart Checklist
Download HSE Docs hseprof.com
Supplier Verification & Plant Details Verify Check CAB Verify Check WARNING DEVICES
Cleanliness • Horn
Plant Owner: Seat Condition OK • Amber Flashing Beacon
Operator Restraint Provided • Reversing Alarm
Address: Instruments Operational & Labelled
Levers / Controls Operational WARNING SIGNS (In Cabin)
Verify Check
City/Suburb: Pedals in Good Condition
SEAT BELTS
ROPS (Roll Over Protective Structure)
Phone: Windows / Wipers / Washers
Verify Check
DANGER – SAFE WORKING LIMITS ON BATTERS
Rear View Mirrors
Plant Make:
Operator Instruction
(available on plant) Ratio 4/1
Plant Model: Eg only – As per Manufacturers Specifications
Verify Check
Serial No.: Exhaust Verify Check
Locating lock for
Signature: Low/Neutral/Lower Range
Verify Check
Pad lock provided
Engine Guarding
Warning sign – Hasp must be
Verify Check locked in position before
Plant to conform to manufacturer’s specifications and Vic Plant Tyres operating
Regs.
Plant Operator is to provide daily checksheets to HSE Wheels
Where applicable, Personal Protective Equipment must be worn. Brakes
Plant Log Book Detailing service history in accordance with Verify Check
Manufacturer’s specifications should be written legibly in Park Brake
English. Rubber Mounts (Drum)
Contractor must produce proof of competence of operator, e.g.,
Certificate of Competence, Licence, Detailed Log Book Verify Check
Crush Point Hazard
Sign displayed both Verify Check
sides Drum Cleaning Rakes
HSE Use Only Verify Check
Handrails
NOTE: Sign only when all items have been checked Steps
Verify Hydraulics
Plant Check By: Rams
Position: Hoses
Connections Instructions:
Date: / / (check for excessive Verify Box to be ticked by Owner / Supplier / Operator prior to arrival onsite.
wear and leaks) Check Box to be ticked after visual inspection by HSE Department
This is to certify that the plant being supplied conforms to the relevant HSE Legislation, and the requirements as detailed above. HSE Department will assess this Pre-start Checklist to ensure the supplier has verified compliance to HSE Legislative requirements and, to
register the plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from
commencing work on the site until the non-compliance is rectified. HSE Management will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.
This form does not remove any liability for the plant supplier to conform with the relevant HSE Legislation
Form: HSE-INSP-0014
Prestart Checklist
Download HSE Docs hseprof.com
Supplier Verification & Plant Details Verify CAB Verify Check WARNING DEVICES
Cleanliness
• Horn
Plant Supplier Seat Condition OK
• Reversing Alarm
Operator Restraint Provided
Phone Number Instruments Operational & Labelled
Levers / Controls Operational
WARNING SIGNS (In Cabin)
Verify Check
Plant Make Pedals in Good Condition
SEAT BELTS
ROPS (Roll Over Protective Structure)
Plant Model Windows / Wipers / Washers
Verify Check
Rear View Mirrors
Serial No. Verify Check
Pivots
Verify Check
Operator Instruction
Connecting Rods
Name (available on plant) Exhaust Exhaust
Safety Pins
(no excessive wear)
Signature:
Date
This is to certify that the plant being supplied conforms to the relevant HSE Legislation, and the requirements as detailed above. HSE Department will assess this Pre-start Checklist to ensure the supplier has verified compliance to HSE Legislative requirements and, to
register the plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from
commencing work on the site until the non-compliance is rectified. HSE Management will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.
This form does not remove any liability for the plant supplier to conform with the relevant HSE Legislation
Form: HSE-INSP-0015
Prestart Checklist
Download HSE Docs hseprof.com
Supplier Verification & Plant Details Verify Check CAB Verify Check WARNING DEVICES
Cleanliness • Horn
Plant Supplier Seat Condition OK • Reversing Alarm
Operator Restraint Provided
Phone Number Instruments Operational & Labelled WARNING SIGNS (In Cabin)
Verify Check
Levers / Controls Operational
SEAT BELTS
Plant Make Pedals in Good Condition
ROPS (Roll Over Protective Structure) Hydraulics Verify Check
Plant Model Windows / Wipers / Washers Rams
Rear View Mirrors Hoses
Serial No. Operator Instruction Connections
Verify Check
(available on plant) (check for excessive
Name Pivots
Verify Check Wear and leaks)
Connecting Rods
Signature: Exhaust
Safety Pins
(no excessive wear)
Date
This is to certify that the plant being supplied conforms to the relevant HSE Legislation, and the requirements as detailed above. HSE Department will check this Pre-start Checklist to ensure the supplier has verified compliance to HSE Legislative requirements and, to
register the plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from
commencing work on the site until the non-compliance is rectified. Company Management will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.
This form does not remove any liability for the plant supplier to conform with the relevant HSE Legislation
Form: HSE-INSP-0016
Prestart Checklist
Download HSE Docs hseprof.com
Supplier Verification & Plant Details Verify Check CAB Verify Check WARNING DEVICES
Cleanliness • Horn
Plant Supplier Seat • Amber Flashing Beacon
Operator Restraint • Reversing Alarm
Phone Number Instruments & Labelling
Levers / Controls WARNING SIGNS (In Cabin)
Plant Make Pedals Verify Check
This is to certify that the plant being supplied conforms to the relevant HSE Legislation, and the requirements as detailed above. HSE Department will assess this Pre-start Checklist to ensure the supplier has verified compliance to HSE Legislative requirements and, to
register the plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from
commencing work on the site until the non-compliance is rectified. Company Management will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.
This form does not remove any liability for the plant supplier to conform with the relevant HSE Legislation
Form: HSE-INSP-0017
Prestart Checklist
Download HSE Docs hseprof.com
Supplier Verification & Plant Details Verify Check CAB Verify Check WARNING DEVICES
Cleanliness • Horn
Plant Supplier Seat Condition OK • Amber Flashing Beacon
Operator Restraint Provided • Reversing Alarm
Phone Number Instruments Operational & Labelled
Levers / Controls Operational WARNING SIGNS (In Cabin)
Verify Check
Plant Make Pedals in Good Condition
SEAT BELTS
ROPS (Roll Over Protective Structure)
Plant Model Windows / Wipers / Washers
Verify Check
DANGER – BEWARE OVERHEAD WIRES
Rear View Mirrors & UNDERGROUND SERVICES
Serial No.
Operator Instruction
Name (available on plant)
Verify Check
Verify Check
Signature: Exhaust
Connecting Rods &
Safety Pins
Date
This is to certify that the plant being supplied conforms to the relevant HSE Legislation, and the requirements as detailed above. HSE will check this Pre-start Checklist to ensure the supplier has verified compliance to HSE Legislative requirements and, to register the
plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from commencing work on
the site until the non-compliance is rectified. HSE Management will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.
This form does not remove any liability for the plant supplier to conform with the relevant HSE Legislation
Form: HSE-INSP-0018
Date:
Supplier Verification & Plant Details Verify Check WARNING DEVICES WARNING SIGNS (In Cabin) Verify Check CABIN
Verify Check
• Horn Cleanliness
Plant Supplier • Amber Flashing Beacon (when onsite) SEAT BELTS Seat
• Reversing Alarm Seat Belts
Phone Number • Head, Tail & Turn Indicators Instruments & Labelling
Levers / Controls
Plant Make Pedals
Verify Check Air / Hydraulics Verify Check Windows / Wipers / Washers
Plant Model
Rams Exhaust Rear View Mirror
Serial No. Hoses Current Registration Sticker
Connections
Name (check for excessive wear and leaks)
Hoist Control from Cabin
Signature: Tail Gate Control from Cabin KEEP CLEAR
AIR OPERATED TAILGATE
Date
Verify Check
This is to certify that the plant being supplied conforms to the relevant HSE Legislation, and the requirements as detailed above. HSE Department will assess this Pre-start Checklist to ensure the supplier has verified compliance to HSE Legislative requirements and, to
register the plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from
commencing work on the site until the non-compliance is rectified. HSE Management will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.
This form does not remove any liability for the plant supplier to conform with the relevant HSE Legislation