Professional Documents
Culture Documents
CUSTOMER DETAILS
Customer Name Ramboll Customer Number 73
Address
Town
Postcode
Country
GENERAL DATA
Product Air handling unit Customer reference 1.AHU-E-12.01
Number off 1 AHU configuration Double deck (opposite)
Energy Efficiency Class A Altitude m 5
Location External Unit velocity m/s 1.62
SFPe kW/m³/s 3.66 SFPv kW/m³/s 3.40
Leakage rate at -400 Pa l/m²/s 0.28 Leakage rate at 700 Pa l/m²/s 0.40
Total weight (each) kg 1744.87 Roof type None
Radiated casework SWL 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz dB(A)
65 64 62 56 51 44 32 63
CASING DATA
Profile type Thermal break / Thermal Panel thickness mm 50 / 50
break
Panel insulation Polyurethane / Polyurethane Insulation density kg/m³ 45 / 45
Base frame material Galvanised steel Base frame height mm 100
EXHAUST DATA
Model TAH 2290 / 1220
Type Floor mounted Air volume m³/s 4.78
External static Pa 500
Internal skin material Galvanised plain 0.7mm External skin material Galv. precoated 0.7mm
SFPe kW/m³/s 1.66 SFPv kW/m³/s 1.60
Operating sound level 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz dB(A)
Inlet dB 84 87 91 89 83 80 74 70 90
Outlet dB 89 90 93 91 89 85 78 73 93
SUPPLY DATA
Model TAH 2290 / 1240
Type Floor mounted Air volume m³/s 4.59
External static Pa 500
Internal skin material Galvanised plain 0.7mm External skin material Galv. precoated 0.7mm
SFPe kW/m³/s 2.09 SFPv kW/m³/s 1.88
Operating sound level 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz dB(A)
Inlet dB 83 84 87 84 73 68 60 53 84
Outlet dB 92 90 92 92 89 85 79 74 94
DELIVERY SECTION(S)
Section Width (mm) Height (mm) Length (mm) Baseframe (mm) Weight (kg)
1 2400 1330 740 - 104.67
2 2400 1330 740 - 78.36
3 2400 1330 1233 - 126.11
4 2400 1330 740 - 78.36
5 2400 1330 1640 - 369.11
6 2400 1350 1683 Channel (100) 182.91
7 2400 1350 740 Channel (100) 75.62
8 2400 1350 1233 Channel (100) 280.28
9 2400 1350 740 Channel (100) 75.62
10 2400 1350 1640 Channel (100) 373.85
EXHAUST COMPONENTS
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
SUPPLY COMPONENTS
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
ACCESS 1
Access type Hinged Access side Right
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
ACCESS 1
Access type Hinged Access side Right
3000 kW 11
Air v olume 4.78 m³/s
8
Fan speed 1801 RPM
2000 6 Static pressure 900 Pa
Dy namic pressure 83 Pa
4 Total pressure 1074 Pa
3 Ef f iciency 76.8 %
Abs. power 6.69 kW
1000 2 Lw(A) 94 dB(A)
1.5
2900
1 2700
.8 105 2500
RPM
500
.6 2300
400
2100
100
300
1800
95
1600
200
1400
90
1200
100 85
80 Lw(A) in dB(A)
1000
900
1 2 3 4 5 10
Air Volume (m³/s)
3000 kW 11
Air v olume 4.59 m³/s
8
Fan speed 1949 RPM
2000 6 Static pressure 1240 Pa
Dy namic pressure 76 Pa
4 Total pressure 1400 Pa
3 Ef f iciency 79.5 %
Abs. power 8.08 kW
1000 2 Lw(A) 94 dB(A)
1.5
2900
1 2700
.8 105 2500
RPM
500
.6 2300
400
2100
100
300
1800
95
1600
200
1400
90
1200
100 85
80 Lw(A) in dB(A)
1000
900
1 2 3 4 5 10
Air Volume (m³/s)
Project :
AHU Ref : Date : 30 - Dec - 2018
S 34.0 32.0 87.0 29.8 110. S 21.4 21.3 99.9 17.4 62.4
M 40.6 23.9 24.6 11.8 71.3 M 36.7 20.6 22.1 8.5 58.9
W 34.0 32.0 87.0 29.8 110. W 21.4 21.3 99.9 17.4 62.4
S 29.4 28.3 92.1 24.1 91.4 S 16.0 15.6 96.1 10.9 43.9
M 39.2 22.6 23.4 10.3 66.1 M 35.0 18.7 19.4 6.8 52.7
W 29.4 28.3 92.1 24.1 91.4 W 16.0 15.6 96.1 10.9 43.9
Mechanical Details
Rotor : Cassette :
WHEEL DIA : 2000 mm DIMENSION : mm (Inch) 2130 (83.86) (W) 2130 (83.86) (H) 325 (12.80) (D)
WHEEL DEPTH 200 mm DRIVER MOTOR: 370 Watts
PURGE ANGLE 7.5 Deg WEIGHT : 345 / 760.38 KG / lbs (NET UNPACKED )
SubstrateThe substrate or wheel matrix should be only of pure aluminum foil, and not from any material,which is combustible or supports combustion,so as to
allow:a)quick and efficient uptake of thermal energy, b)suffi. mass for optimum heat transfer and c)maximum sensible heat recovery at a relatively
low rotational speed of 20 to 25 rpm.
DesiccantThe desiccant should be of 'Ecosorb 300 [3A] type*' belonging to the molecular sieve family ,which should maximize moisture uptake and therefore
maximize latent recovery.The desiccant, of sufficient mass, should be coated with non masking porous binder adhesive on the aluminum substrate
so as to allow quick and easy uptake and release of water vapor.
RotorThe rotor/wheel matrix shall have nearly equal sensible and latent recovery. The weight of desiccant coating and the mass of aluminum foil shall
be in a ratio so as to ensure nearly equal recovery of both sensible and latent heat over the operating range. The rotor shall be made of alternate
flat and corrugated aluminum foil of uniform width.The rotor honeycomb matrix foil should be so wound and adhered as to make a structurally very
strong and rigid media, which shall not get cracked,deformed etc.due to change of temperature or humidity.
CassetteThe DRI cassettes have modern state of the art folded sheet metal cassettes for smaller sizes (up to 2400 mm dia wheel) and epoxy coated
tubular frame work for larger sizes.
Project :
AHU Ref : Date : 30 - Dec - 2018
S 13.0 12.9 98.8 9.2 36.6 S 21.5 16.2 57.5 9.2 45.2
M 40.6 23.9 24.6 11.8 71.3 M 29.6 20.8 45.4 11.8 60.1
W 13.0 12.9 98.8 9.2 36.6 W 21.5 16.2 57.5 9.2 45.2
S 16.0 15.6 95.9 10.9 43.9 S 25.0 18.7 54.9 10.9 53.1
M 36.7 22.3 28.3 10.9 65.1 M 25.0 18.7 54.9 10.9 53.1
W 16.0 15.6 95.9 10.9 43.9 W 25.0 18.7 54.9 10.9 53.1
17350 - 73 0 28
Outdoor (O/A) .05
- 152
Supply (S/A) 16524 3.25
15531 3.05
75.03 0 28
Return (R/A) .05
143
Exhaust (E/A) 16357 - -
Mechanical Details
Rotor : Cassette :
WHEEL DIA : 2000 mm DIMENSION : mm (Inch) 2130 (83.86) (W) 2130 (83.86) (H) 325 (12.80) (D)
WHEEL DEPTH 200 mm DRIVER MOTOR: 370 Watts
PURGE ANGLE 7.5 Deg WEIGHT : 313 / 689.85 KG / lbs (NET UNPACKED )
SubstrateThe substrate or wheel matrix should be only of pure aluminum foil, and not from any material,which is combustible or supports combustion,so as to
allow:a)quick and efficient uptake of thermal energy, b)sufficient mass for optimum heat transfer and c)maximum sensible heat recovery at a relatively
low rotational speed of 17 to 20 rpm.
RotorThe rotor/wheel matrix shall have high sensible recovery. The rotor shall be made of alternate flat and corrugated aluminum foil of uniform width.
The rotor honeycomb matrix foil should be so wound and adhered as to make a structurally very strong and rigid media, which shall not get cracked,
deformed etc.due to change of temperature or humidity.
CassetteThe DRI cassettes have modern state of the art folded sheet metal cassettes for smaller sizes (up to 2400 mm dia wheel) and epoxy coated
tubular frame work for larger sizes.
CUSTOMER DETAILS
Customer Name Ramboll Customer Number 73
Address
Town
Postcode
Country
GENERAL DATA
Product Air handling unit Customer reference 2.AHU-E-12.02
Number off 1 AHU configuration Double deck (opposite)
Energy Efficiency Class A Altitude m 5
Location External Unit velocity m/s 1.56
SFPe kW/m³/s 3.64 SFPv kW/m³/s 3.38
Leakage rate at -400 Pa l/m²/s 0.28 Leakage rate at 700 Pa l/m²/s 0.40
Total weight (each) kg 1774.22 Roof type None
Radiated casework SWL 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz dB(A)
65 65 62 56 51 44 32 63
CASING DATA
Profile type Thermal break / Thermal Panel thickness mm 50 / 50
break
Panel insulation Polyurethane / Polyurethane Insulation density kg/m³ 45 / 45
Base frame material Galvanised steel Base frame height mm 100
EXHAUST DATA
Model TAH 2290 / 1330
Type Floor mounted Air volume m³/s 4.85
External static Pa 500
Internal skin material Galvanised plain 0.7mm External skin material Galv. precoated 0.7mm
SFPe kW/m³/s 1.67 SFPv kW/m³/s 1.61
Operating sound level 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz dB(A)
Inlet dB 84 87 92 89 83 80 75 70 90
Outlet dB 89 91 94 92 89 85 79 73 94
SUPPLY DATA
Model TAH 2290 / 1280
Type Floor mounted Air volume m³/s 4.58
External static Pa 500
Internal skin material Galvanised plain 0.7mm External skin material Galv. precoated 0.7mm
SFPe kW/m³/s 2.09 SFPv kW/m³/s 1.87
Operating sound level 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz dB(A)
Inlet dB 83 84 87 84 73 68 60 53 84
Outlet dB 92 89 92 92 89 85 79 74 94
DELIVERY SECTION(S)
Section Width (mm) Height (mm) Length (mm) Baseframe (mm) Weight (kg)
1 2400 1440 740 - 109.09
2 2400 1440 740 - 80.67
3 2400 1440 1233 - 129.77
4 2400 1440 740 - 80.67
5 2400 1440 1640 - 376.01
6 2400 1390 1683 Channel (100) 185.54
7 2400 1390 740 Channel (100) 76.46
8 2400 1390 1233 Channel (100) 283.18
9 2400 1390 740 Channel (100) 76.46
10 2400 1390 1640 Channel (100) 376.36
EXHAUST COMPONENTS
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
SUPPLY COMPONENTS
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
ACCESS 1
Access type Hinged Access side Right
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
ACCESS 1
Access type Hinged Access side Right
3000 kW 11
Air v olume 4.85 m³/s
8
Fan speed 1812 RPM
2000 6 Static pressure 900 Pa
Dy namic pressure 85 Pa
4 Total pressure 1079 Pa
3 Ef f iciency 76.6 %
Abs. power 6.83 kW
1000 2 Lw(A) 95 dB(A)
1.5
2900
1 2700
.8 105 2500
RPM
500
.6 2300
400
2100
100
300
1800
95
1600
200
1400
90
1200
100 85
80 Lw(A) in dB(A)
1000
900
1 2 3 4 5 10
Air Volume (m³/s)
3000 kW 11
Air v olume 4.58 m³/s
8
Fan speed 1948 RPM
2000 6 Static pressure 1240 Pa
Dy namic pressure 76 Pa
4 Total pressure 1400 Pa
3 Ef f iciency 79.6 %
Abs. power 8.06 kW
1000 2 Lw(A) 94 dB(A)
1.5
2900
1 2700
.8 105 2500
RPM
500
.6 2300
400
2100
100
300
1800
95
1600
200
1400
90
1200
100 85
80 Lw(A) in dB(A)
1000
900
1 2 3 4 5 10
Air Volume (m³/s)
Project :
AHU Ref : Date : 30 - Dec - 2018
S 34.0 32.0 87.0 29.8 110. S 21.4 21.3 99.9 17.4 62.4
M 40.6 23.9 24.6 11.8 71.3 M 36.7 20.6 22.1 8.5 58.9
W 34.0 32.0 87.0 29.8 110. W 21.4 21.3 99.9 17.4 62.4
S 29.3 28.2 92.3 24.0 91.0 S 16.1 15.7 96.1 11.0 44.1
M 39.1 22.5 23.4 10.3 66.0 M 35.0 18.7 19.4 6.8 52.7
W 29.3 28.2 92.3 24.0 91.0 W 16.1 15.7 96.1 11.0 44.1
Mechanical Details
Rotor : Cassette :
WHEEL DIA : 2000 mm DIMENSION : mm (Inch) 2130 (83.86) (W) 2130 (83.86) (H) 325 (12.80) (D)
WHEEL DEPTH 200 mm DRIVER MOTOR: 370 Watts
PURGE ANGLE 7.5 Deg WEIGHT : 345 / 760.38 KG / lbs (NET UNPACKED )
SubstrateThe substrate or wheel matrix should be only of pure aluminum foil, and not from any material,which is combustible or supports combustion,so as to
allow:a)quick and efficient uptake of thermal energy, b)suffi. mass for optimum heat transfer and c)maximum sensible heat recovery at a relatively
low rotational speed of 20 to 25 rpm.
DesiccantThe desiccant should be of 'Ecosorb 300 [3A] type*' belonging to the molecular sieve family ,which should maximize moisture uptake and therefore
maximize latent recovery.The desiccant, of sufficient mass, should be coated with non masking porous binder adhesive on the aluminum substrate
so as to allow quick and easy uptake and release of water vapor.
RotorThe rotor/wheel matrix shall have nearly equal sensible and latent recovery. The weight of desiccant coating and the mass of aluminum foil shall
be in a ratio so as to ensure nearly equal recovery of both sensible and latent heat over the operating range. The rotor shall be made of alternate
flat and corrugated aluminum foil of uniform width.The rotor honeycomb matrix foil should be so wound and adhered as to make a structurally very
strong and rigid media, which shall not get cracked,deformed etc.due to change of temperature or humidity.
CassetteThe DRI cassettes have modern state of the art folded sheet metal cassettes for smaller sizes (up to 2400 mm dia wheel) and epoxy coated
tubular frame work for larger sizes.
Project :
AHU Ref : Date : 30 - Dec - 2018
S 13.0 12.9 98.8 9.2 36.6 S 21.5 16.2 57.5 9.2 45.2
M 40.6 23.9 24.6 11.8 71.3 M 29.5 20.9 45.7 11.8 60.0
W 13.0 12.9 98.8 9.2 36.6 W 21.5 16.2 57.5 9.2 45.2
S 16.1 15.7 95.5 10.9 44.0 S 25.0 18.7 54.9 10.9 53.1
M 36.6 22.2 28.4 10.9 65.0 M 25.0 18.7 54.9 10.9 53.1
W 16.1 15.7 95.5 10.9 44.0 W 25.0 18.7 54.9 10.9 53.1
17312 - 72.8 0 28
Outdoor (O/A) .05
- 152
Supply (S/A) 16488 3.24
15768 3.1
74.29 0 28
Return (R/A) .05
145
Exhaust (E/A) 16592 - -
Mechanical Details
Rotor : Cassette :
WHEEL DIA : 2000 mm DIMENSION : mm (Inch) 2130 (83.86) (W) 2130 (83.86) (H) 325 (12.80) (D)
WHEEL DEPTH 200 mm DRIVER MOTOR: 370 Watts
PURGE ANGLE 7.5 Deg WEIGHT : 313 / 689.85 KG / lbs (NET UNPACKED )
SubstrateThe substrate or wheel matrix should be only of pure aluminum foil, and not from any material,which is combustible or supports combustion,so as to
allow:a)quick and efficient uptake of thermal energy, b)sufficient mass for optimum heat transfer and c)maximum sensible heat recovery at a relatively
low rotational speed of 17 to 20 rpm.
RotorThe rotor/wheel matrix shall have high sensible recovery. The rotor shall be made of alternate flat and corrugated aluminum foil of uniform width.
The rotor honeycomb matrix foil should be so wound and adhered as to make a structurally very strong and rigid media, which shall not get cracked,
deformed etc.due to change of temperature or humidity.
CassetteThe DRI cassettes have modern state of the art folded sheet metal cassettes for smaller sizes (up to 2400 mm dia wheel) and epoxy coated
tubular frame work for larger sizes.
CUSTOMER DETAILS
Customer Name Ramboll Customer Number 73
Address
Town
Postcode
Country
GENERAL DATA
Product Air handling unit Customer reference 3.AHU-E-1.01
Number off 1 AHU configuration Double deck (opposite)
Energy Efficiency Class A Altitude m 5
Location External Unit velocity m/s 1.56
SFPe kW/m³/s 3.65 SFPv kW/m³/s 3.39
Leakage rate at -400 Pa l/m²/s 0.28 Leakage rate at 700 Pa l/m²/s 0.40
Total weight (each) kg 1747.98 Roof type None
Radiated casework SWL 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz dB(A)
65 64 62 56 51 44 32 63
CASING DATA
Profile type Thermal break / Thermal Panel thickness mm 50 / 50
break
Panel insulation Polyurethane / Polyurethane Insulation density kg/m³ 45 / 45
Base frame material Galvanised steel Base frame height mm 100
EXHAUST DATA
Model TAH 2290 / 1180
Type Floor mounted Air volume m³/s 4.84
External static Pa 500
Internal skin material Galvanised plain 0.7mm External skin material Galv. precoated 0.7mm
SFPe kW/m³/s 1.68 SFPv kW/m³/s 1.62
Operating sound level 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz dB(A)
Inlet dB 84 87 91 89 83 80 75 70 90
Outlet dB 89 91 94 92 89 85 78 73 94
SUPPLY DATA
Model TAH 2290 / 1280
Type Floor mounted Air volume m³/s 4.57
External static Pa 500
Internal skin material Galvanised plain 0.7mm External skin material Galv. precoated 0.7mm
SFPe kW/m³/s 2.09 SFPv kW/m³/s 1.87
Operating sound level 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz dB(A)
Inlet dB 83 84 87 84 73 68 60 53 84
Outlet dB 92 89 92 92 89 85 79 74 94
DELIVERY SECTION(S)
Section Width (mm) Height (mm) Length (mm) Baseframe (mm) Weight (kg)
1 2400 1290 740 - 103.57
2 2400 1290 740 - 77.51
3 2400 1290 1233 - 124.77
4 2400 1290 740 - 77.51
5 2400 1290 1640 - 366.60
6 2400 1390 1683 Channel (100) 185.54
7 2400 1390 740 Channel (100) 76.46
8 2400 1390 1233 Channel (100) 283.18
9 2400 1390 740 Channel (100) 76.46
10 2400 1390 1640 Channel (100) 376.36
EXHAUST COMPONENTS
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
SUPPLY COMPONENTS
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
ACCESS 1
Access type Hinged Access side Right
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
ACCESS 1
Access type Hinged Access side Right
3000 kW 11
Air v olume 4.84 m³/s
8
Fan speed 1812 RPM
2000 6 Static pressure 905 Pa
Dy namic pressure 85 Pa
4 Total pressure 1083 Pa
3 Ef f iciency 76.7 %
Abs. power 6.83 kW
1000 2 Lw(A) 94 dB(A)
1.5
2900
1 2700
.8 105 2500
RPM
500
.6 2300
400
2100
100
300
1800
95
1600
200
1400
90
1200
100 85
80 Lw(A) in dB(A)
1000
900
1 2 3 4 5 10
Air Volume (m³/s)
3000 kW 11
Air v olume 4.57 m³/s
8
Fan speed 1946 RPM
2000 6 Static pressure 1240 Pa
Dy namic pressure 76 Pa
4 Total pressure 1399 Pa
3 Ef f iciency 79.6 %
Abs. power 8.04 kW
1000 2 Lw(A) 94 dB(A)
1.5
2900
1 2700
.8 105 2500
RPM
500
.6 2300
400
2100
100
300
1800
95
1600
200
1400
90
1200
100 85
80 Lw(A) in dB(A)
1000
900
1 2 3 4 5 10
Air Volume (m³/s)
Project :
AHU Ref : Date : 30 - Dec - 2018
S 34.0 32.0 87.0 29.8 110. S 21.4 21.3 99.9 17.4 62.4
M 40.6 23.9 24.6 11.8 71.3 M 36.7 20.6 22.1 8.5 58.9
W 34.0 32.0 87.0 29.8 110. W 21.4 21.3 99.9 17.4 62.4
S 29.3 28.2 92.3 24.0 91.0 S 16.1 15.7 96.1 11.0 44.1
M 39.1 22.5 23.4 10.3 66.0 M 35.0 18.7 19.4 6.8 52.7
W 29.3 28.2 92.3 24.0 91.0 W 16.1 15.7 96.1 11.0 44.1
Mechanical Details
Rotor : Cassette :
WHEEL DIA : 2000 mm DIMENSION : mm (Inch) 2130 (83.86) (W) 2130 (83.86) (H) 325 (12.80) (D)
WHEEL DEPTH 200 mm DRIVER MOTOR: 370 Watts
PURGE ANGLE 7.5 Deg WEIGHT : 345 / 760.38 KG / lbs (NET UNPACKED )
SubstrateThe substrate or wheel matrix should be only of pure aluminum foil, and not from any material,which is combustible or supports combustion,so as to
allow:a)quick and efficient uptake of thermal energy, b)suffi. mass for optimum heat transfer and c)maximum sensible heat recovery at a relatively
low rotational speed of 20 to 25 rpm.
DesiccantThe desiccant should be of 'Ecosorb 300 [3A] type*' belonging to the molecular sieve family ,which should maximize moisture uptake and therefore
maximize latent recovery.The desiccant, of sufficient mass, should be coated with non masking porous binder adhesive on the aluminum substrate
so as to allow quick and easy uptake and release of water vapor.
RotorThe rotor/wheel matrix shall have nearly equal sensible and latent recovery. The weight of desiccant coating and the mass of aluminum foil shall
be in a ratio so as to ensure nearly equal recovery of both sensible and latent heat over the operating range. The rotor shall be made of alternate
flat and corrugated aluminum foil of uniform width.The rotor honeycomb matrix foil should be so wound and adhered as to make a structurally very
strong and rigid media, which shall not get cracked,deformed etc.due to change of temperature or humidity.
CassetteThe DRI cassettes have modern state of the art folded sheet metal cassettes for smaller sizes (up to 2400 mm dia wheel) and epoxy coated
tubular frame work for larger sizes.
Project :
AHU Ref : Date : 30 - Dec - 2018
S 13.0 12.9 98.8 9.2 36.6 S 21.5 16.2 57.5 9.2 45.2
M 40.6 23.9 24.6 11.8 71.3 M 29.5 20.9 45.7 11.8 60.0
W 13.0 12.9 98.8 9.2 36.6 W 21.5 16.2 57.5 9.2 45.2
S 16.1 15.7 95.5 10.9 44.0 S 25.0 18.7 54.9 10.9 53.1
M 36.6 22.2 28.4 10.9 65.0 M 25.0 18.7 54.9 10.9 53.1
W 16.1 15.7 95.5 10.9 44.0 W 25.0 18.7 54.9 10.9 53.1
17292 - 72.8 0 28
Outdoor (O/A) .05
- 152
Supply (S/A) 16469 3.24
15720 3.09
74.29 0 28
Return (R/A) .05
145
Exhaust (E/A) 16543 - -
Mechanical Details
Rotor : Cassette :
WHEEL DIA : 2000 mm DIMENSION : mm (Inch) 2130 (83.86) (W) 2130 (83.86) (H) 325 (12.80) (D)
WHEEL DEPTH 200 mm DRIVER MOTOR: 370 Watts
PURGE ANGLE 7.5 Deg WEIGHT : 313 / 689.85 KG / lbs (NET UNPACKED )
SubstrateThe substrate or wheel matrix should be only of pure aluminum foil, and not from any material,which is combustible or supports combustion,so as to
allow:a)quick and efficient uptake of thermal energy, b)sufficient mass for optimum heat transfer and c)maximum sensible heat recovery at a relatively
low rotational speed of 17 to 20 rpm.
RotorThe rotor/wheel matrix shall have high sensible recovery. The rotor shall be made of alternate flat and corrugated aluminum foil of uniform width.
The rotor honeycomb matrix foil should be so wound and adhered as to make a structurally very strong and rigid media, which shall not get cracked,
deformed etc.due to change of temperature or humidity.
CassetteThe DRI cassettes have modern state of the art folded sheet metal cassettes for smaller sizes (up to 2400 mm dia wheel) and epoxy coated
tubular frame work for larger sizes.
CUSTOMER DETAILS
Customer Name Ramboll Customer Number 73
Address
Town
Postcode
Country
GENERAL DATA
Product Air handling unit Customer reference 4.AHU-E-12.03
Number off 1 AHU configuration Double deck (opposite)
Energy Efficiency Class A Altitude m 5
Location External Unit velocity m/s 1.14
SFPe kW/m³/s 3.94 SFPv kW/m³/s 3.60
Leakage rate at -400 Pa l/m²/s 0.28 Leakage rate at 700 Pa l/m²/s 0.40
Total weight (each) kg 850.72 Roof type None
Radiated casework SWL 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz dB(A)
65 58 59 54 52 45 31 60
CASING DATA
Profile type Thermal break / Thermal Panel thickness mm 50 / 50
break
Panel insulation Polyurethane / Polyurethane Insulation density kg/m³ 45 / 45
Base frame material Galvanised steel Base frame height mm 100
EXHAUST DATA
Model TAH 1490 / 820
Type Floor mounted Air volume m³/s 1.52
External static Pa 500
Internal skin material Galvanised plain 0.7mm External skin material Galv. precoated 0.7mm
SFPe kW/m³/s 1.91 SFPv kW/m³/s 1.84
Operating sound level 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz dB(A)
Inlet dB 80 86 80 86 82 83 78 70 89
Outlet dB 85 88 82 87 85 89 83 74 93
SUPPLY DATA
Model TAH 1490 / 810
Type Floor mounted Air volume m³/s 1.38
External static Pa 500
Internal skin material Galvanised plain 0.7mm External skin material Galv. precoated 0.7mm
SFPe kW/m³/s 2.24 SFPv kW/m³/s 1.94
Operating sound level 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz dB(A)
Inlet dB 83 86 83 81 70 63 58 50 80
Outlet dB 94 94 91 87 83 82 77 71 90
DELIVERY SECTION(S)
Section Width (mm) Height (mm) Length (mm) Baseframe (mm) Weight (kg)
1 1600 930 290 - 46.23
2 1600 930 740 - 53.09
3 1600 930 1233 - 86.13
4 1600 930 740 - 53.09
5 1600 930 1190 - 133.61
6 1600 920 1233 Channel (100) 94.99
7 1600 920 740 Channel (100) 49.71
8 1600 920 1233 Channel (100) 145.58
9 1600 920 740 Channel (100) 49.71
10 1600 920 1190 Channel (100) 138.58
EXHAUST COMPONENTS
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
SUPPLY COMPONENTS
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
ACCESS 1
Access type Hinged Access side Right
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
ACCESS 1
Access type Hinged Access side Right
RPM
.2 4300
500
4000
400
3600
300 95 3200
2800
200 75
90
2400
85 2000
100 Lw(A) in dB(A) 1800
80 1600
.2 .3 .4 .5 1 2 3 4
Air Volume (m³/s)
RPM
.4
500 3600
100
400 3200
300 2800
95
2400
200 75
90
2000
85 1800
100 Lw(A) in dB(A) 1600
80 1400
.3 .4 .5 1 2 3 4 5
Air Volume (m³/s)
Project :
AHU Ref : Date : 30 - Dec - 2018
S 34.0 32.0 87.0 29.8 110. S 20.8 20.7 99.9 16.7 60.3
M 40.6 23.9 24.6 11.8 71.3 M 36.5 20.5 21.8 8.3 58.2
W 34.0 32.0 87.0 29.8 110. W 20.8 20.7 99.9 16.7 60.3
S 29.3 28.3 92.7 24.1 91.3 S 16.1 15.7 96.1 11.0 44.1
M 39.1 22.5 23.4 10.3 66.0 M 35.0 18.7 19.4 6.8 52.7
W 29.3 28.3 92.7 24.1 91.3 W 16.1 15.7 96.1 11.0 44.1
Mechanical Details
Rotor : Cassette :
WHEEL DIA : 1200 mm DIMENSION : mm (Inch) 1330 (52.36) (W) 1330 (52.36) (H) 295 (11.61) (D)
WHEEL DEPTH 200 mm DRIVER MOTOR: 180 Watts
PURGE ANGLE 7.5 Deg WEIGHT : 152 / 335.01 KG / lbs (NET UNPACKED )
SubstrateThe substrate or wheel matrix should be only of pure aluminum foil, and not from any material,which is combustible or supports combustion,so as to
allow:a)quick and efficient uptake of thermal energy, b)suffi. mass for optimum heat transfer and c)maximum sensible heat recovery at a relatively
low rotational speed of 20 to 25 rpm.
DesiccantThe desiccant should be of 'Ecosorb 300 [3A] type*' belonging to the molecular sieve family ,which should maximize moisture uptake and therefore
maximize latent recovery.The desiccant, of sufficient mass, should be coated with non masking porous binder adhesive on the aluminum substrate
so as to allow quick and easy uptake and release of water vapor.
RotorThe rotor/wheel matrix shall have nearly equal sensible and latent recovery. The weight of desiccant coating and the mass of aluminum foil shall
be in a ratio so as to ensure nearly equal recovery of both sensible and latent heat over the operating range. The rotor shall be made of alternate
flat and corrugated aluminum foil of uniform width.The rotor honeycomb matrix foil should be so wound and adhered as to make a structurally very
strong and rigid media, which shall not get cracked,deformed etc.due to change of temperature or humidity.
CassetteThe DRI cassettes have modern state of the art folded sheet metal cassettes for smaller sizes (up to 2400 mm dia wheel) and epoxy coated
tubular frame work for larger sizes.
Project :
AHU Ref : Date : 30 - Dec - 2018
S 13.0 12.9 98.8 9.2 36.6 S 21.9 16.2 56.2 9.2 45.6
M 40.6 23.9 24.6 11.8 71.3 M 29.0 20.7 47.0 11.8 59.5
W 13.0 12.9 98.8 9.2 36.6 W 21.9 16.2 56.2 9.2 45.6
S 16.1 15.7 95.5 10.9 44.0 S 25.0 18.7 54.9 10.9 53.1
M 36.6 22.2 28.4 10.9 65.0 M 25.0 18.7 54.9 10.9 53.1
W 16.1 15.7 95.5 10.9 44.0 W 25.0 18.7 54.9 10.9 53.1
5220 - 74.1 0 28
Outdoor (O/A) .05
- 132
Supply (S/A) 4971 2.78
4971 2.78
74.1 0 28
Return (R/A) .05
132
Exhaust (E/A) 5220 - -
Mechanical Details
Rotor : Cassette :
WHEEL DIA : 1200 mm DIMENSION : mm (Inch) 1330 (52.36) (W) 1330 (52.36) (H) 295 (11.61) (D)
WHEEL DEPTH 200 mm DRIVER MOTOR: 180 Watts
PURGE ANGLE 7.5 Deg WEIGHT : 138 / 304.15 KG / lbs (NET UNPACKED )
SubstrateThe substrate or wheel matrix should be only of pure aluminum foil, and not from any material,which is combustible or supports combustion,so as to
allow:a)quick and efficient uptake of thermal energy, b)sufficient mass for optimum heat transfer and c)maximum sensible heat recovery at a relatively
low rotational speed of 17 to 20 rpm.
RotorThe rotor/wheel matrix shall have high sensible recovery. The rotor shall be made of alternate flat and corrugated aluminum foil of uniform width.
The rotor honeycomb matrix foil should be so wound and adhered as to make a structurally very strong and rigid media, which shall not get cracked,
deformed etc.due to change of temperature or humidity.
CassetteThe DRI cassettes have modern state of the art folded sheet metal cassettes for smaller sizes (up to 2400 mm dia wheel) and epoxy coated
tubular frame work for larger sizes.
CUSTOMER DETAILS
Customer Name Ramboll Customer Number 73
Address
Town
Postcode
Country
GENERAL DATA
Product Air handling unit Customer reference 5.AHU-E-1.02
Number off 1 AHU configuration Double deck (opposite)
Energy Efficiency Class A Altitude m 5
Location External Unit velocity m/s 0.96
SFPe kW/m³/s 3.72 SFPv kW/m³/s 3.30
Leakage rate at -400 Pa l/m²/s 0.28 Leakage rate at 700 Pa l/m²/s 0.40
Total weight (each) kg 713.41 Roof type None
Radiated casework SWL 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz dB(A)
63 52 55 48 47 39 26 56
CASING DATA
Profile type Thermal break / Thermal Panel thickness mm 50 / 50
break
Panel insulation Polyurethane / Polyurethane Insulation density kg/m³ 45 / 45
Base frame material Galvanised steel Base frame height mm 100
EXHAUST DATA
Model TAH 025 TFM
Type Floor mounted Air volume m³/s 0.93
External static Pa 500
Internal skin material Galvanised plain 0.7mm External skin material Galv. precoated 0.7mm
SFPe kW/m³/s 1.69 SFPv kW/m³/s 1.59
Operating sound level 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz dB(A)
Inlet dB 80 84 77 81 75 76 70 64 82
Outlet dB 82 85 78 80 79 82 74 67 86
SUPPLY DATA
Model TAH 025 TFM
Type Floor mounted Air volume m³/s 0.85
External static Pa 500
Internal skin material Galvanised plain 0.7mm External skin material Galv. precoated 0.7mm
SFPe kW/m³/s 2.23 SFPv kW/m³/s 1.88
Operating sound level 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz dB(A)
Inlet dB 77 83 76 77 66 64 55 47 76
Outlet dB 84 88 81 83 79 82 75 68 87
DELIVERY SECTION(S)
Section Width (mm) Height (mm) Length (mm) Baseframe (mm) Weight (kg)
1 1300 850 290 - 37.22
2 1300 850 740 - 45.08
3 1300 850 1233 - 73.47
4 1300 850 740 - 45.08
5 1300 850 1190 - 117.36
6 1300 850 1233 Channel (100) 79.35
7 1300 850 740 Channel (100) 41.92
8 1300 850 1233 Channel (100) 111.46
9 1300 850 740 Channel (100) 41.92
10 1300 850 1190 Channel (100) 120.54
EXHAUST COMPONENTS
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
SUPPLY COMPONENTS
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
ACCESS 1
Access type Hinged Access side Right
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
ACCESS 1
Access type Hinged Access side Right
RPM
.2 4300
500
4000
400
3600
300 95 3200
2800
200 75
90
2400
85 2000
100 Lw(A) in dB(A) 1800
80 1600
.2 .3 .4 .5 1 2 3 4
Air Volume (m³/s)
RPM
.2 4300
500
4000
400
3600
300 95 3200
2800
200 75
90
2400
85 2000
100 Lw(A) in dB(A) 1800
80 1600
.2 .3 .4 .5 1 2 3 4
Air Volume (m³/s)
Project :
AHU Ref : Date : 30 - Dec - 2018
S 34.0 32.0 87.0 29.8 110. S 21.1 21.0 99.9 16.9 61.4
M 40.6 23.9 24.6 11.8 71.3 M 36.5 20.5 22.1 8.4 58.5
W 34.0 32.0 87.0 29.8 110. W 21.1 21.0 99.9 16.9 61.4
S 29.1 28.0 92.5 23.8 90.3 S 16.2 15.7 95.1 10.9 44.1
M 39.1 22.5 23.2 10.2 65.8 M 35.0 18.7 19.4 6.8 52.7
W 29.1 28.0 92.5 23.8 90.3 W 16.2 15.7 95.1 10.9 44.1
Mechanical Details
Rotor : Cassette :
WHEEL DIA : 900 mm DIMENSION : mm (Inch) 1030 (40.55) (W) 1030 (40.55) (H) 295 (11.61) (D)
WHEEL DEPTH 200 mm DRIVER MOTOR: 90 Watts
PURGE ANGLE 7.5 Deg WEIGHT : 91 / 200.56 KG / lbs (NET UNPACKED )
SubstrateThe substrate or wheel matrix should be only of pure aluminum foil, and not from any material,which is combustible or supports combustion,so as to
allow:a)quick and efficient uptake of thermal energy, b)suffi. mass for optimum heat transfer and c)maximum sensible heat recovery at a relatively
low rotational speed of 20 to 25 rpm.
DesiccantThe desiccant should be of 'Ecosorb 300 [3A] type*' belonging to the molecular sieve family ,which should maximize moisture uptake and therefore
maximize latent recovery.The desiccant, of sufficient mass, should be coated with non masking porous binder adhesive on the aluminum substrate
so as to allow quick and easy uptake and release of water vapor.
RotorThe rotor/wheel matrix shall have nearly equal sensible and latent recovery. The weight of desiccant coating and the mass of aluminum foil shall
be in a ratio so as to ensure nearly equal recovery of both sensible and latent heat over the operating range. The rotor shall be made of alternate
flat and corrugated aluminum foil of uniform width.The rotor honeycomb matrix foil should be so wound and adhered as to make a structurally very
strong and rigid media, which shall not get cracked,deformed etc.due to change of temperature or humidity.
CassetteThe DRI cassettes have modern state of the art folded sheet metal cassettes for smaller sizes (up to 2400 mm dia wheel) and epoxy coated
tubular frame work for larger sizes.
Project :
AHU Ref : Date : 30 - Dec - 2018
S 13.0 12.9 98.8 9.2 36.6 S 21.8 16.2 56.5 9.2 45.5
M 40.6 23.9 24.6 11.8 71.3 M 29.2 20.8 46.6 11.8 59.7
W 13.0 12.9 98.8 9.2 36.6 W 21.8 16.2 56.5 9.2 45.5
S 16.2 15.7 94.8 10.9 44.1 S 25.0 18.7 54.9 10.9 53.1
M 36.4 22.3 28.7 10.9 64.8 M 25.0 18.7 54.9 10.9 53.1
W 16.2 15.7 94.8 10.9 44.1 W 25.0 18.7 54.9 10.9 53.1
3194 - 73 0 28
Outdoor (O/A) .05
- 144
Supply (S/A) 3042 3.06
3042 3.06
73 0 28
Return (R/A) .05
144
Exhaust (E/A) 3194 - -
Mechanical Details
Rotor : Cassette :
WHEEL DIA : 900 mm DIMENSION : mm (Inch) 1030 (40.55) (W) 1030 (40.55) (H) 295 (11.61) (D)
WHEEL DEPTH 200 mm DRIVER MOTOR: 90 Watts
PURGE ANGLE 7.5 Deg WEIGHT : 83 / 182.93 KG / lbs (NET UNPACKED )
SubstrateThe substrate or wheel matrix should be only of pure aluminum foil, and not from any material,which is combustible or supports combustion,so as to
allow:a)quick and efficient uptake of thermal energy, b)sufficient mass for optimum heat transfer and c)maximum sensible heat recovery at a relatively
low rotational speed of 17 to 20 rpm.
RotorThe rotor/wheel matrix shall have high sensible recovery. The rotor shall be made of alternate flat and corrugated aluminum foil of uniform width.
The rotor honeycomb matrix foil should be so wound and adhered as to make a structurally very strong and rigid media, which shall not get cracked,
deformed etc.due to change of temperature or humidity.
CassetteThe DRI cassettes have modern state of the art folded sheet metal cassettes for smaller sizes (up to 2400 mm dia wheel) and epoxy coated
tubular frame work for larger sizes.
CUSTOMER DETAILS
Customer Name Ramboll Customer Number 73
Address
Town
Postcode
Country
GENERAL DATA
Product Air handling unit Customer reference 6.AHU-E-B1.01
Number off 1 AHU configuration Double deck (opposite)
Energy Efficiency Class A Altitude m 5
Location External Unit velocity m/s 1.66
SFPe kW/m³/s 4.00 SFPv kW/m³/s 3.71
Leakage rate at -400 Pa l/m²/s 0.28 Leakage rate at 700 Pa l/m²/s 0.40
Total weight (each) kg 1327.87 Roof type None
Radiated casework SWL 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz dB(A)
61 59 59 55 49 42 28 60
CASING DATA
Profile type Thermal break / Thermal Panel thickness mm 50 / 50
break
Panel insulation Polyurethane / Polyurethane Insulation density kg/m³ 45 / 45
Base frame material Galvanised steel Base frame height mm 100
EXHAUST DATA
Model TAH 1890 / 1070
Type Floor mounted Air volume m³/s 3.36
External static Pa 500
Internal skin material Galvanised plain 0.7mm External skin material Galv. precoated 0.7mm
SFPe kW/m³/s 1.69 SFPv kW/m³/s 1.63
Operating sound level 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz dB(A)
Inlet dB 82 83 85 85 81 77 72 65 86
Outlet dB 87 85 86 86 87 82 76 68 90
SUPPLY DATA
Model TAH 1890 / 1070
Type Floor mounted Air volume m³/s 3.35
External static Pa 500
Internal skin material Galvanised plain 0.7mm External skin material Galv. precoated 0.7mm
SFPe kW/m³/s 2.31 SFPv kW/m³/s 2.09
Operating sound level 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz dB(A)
Inlet dB 80 81 82 81 73 67 59 50 81
Outlet dB 91 86 87 87 89 84 77 71 92
DELIVERY SECTION(S)
Section Width (mm) Height (mm) Length (mm) Baseframe (mm) Weight (kg)
1 2000 1180 290 - 60.38
2 2000 1180 740 - 66.77
3 2000 1180 1233 - 107.78
4 2000 1180 740 - 66.77
5 2000 1180 1490 - 270.12
6 2000 1180 1533 Channel (100) 143.42
7 2000 1180 740 Channel (100) 63.61
8 2000 1180 1233 Channel (100) 223.40
9 2000 1180 740 Channel (100) 63.61
10 2000 1180 1490 Channel (100) 262.00
EXHAUST COMPONENTS
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
SUPPLY COMPONENTS
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
ACCESS 1
Access type Hinged Access side Right
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
ACCESS 1
Access type Hinged Access side Right
100 85 1200
80 Lw(A) in dB(A)
1100
1000
.5 1 2 3 4 5 10
Air Volume (m³/s)
100 85 1200
80 Lw(A) in dB(A)
1100
1000
.5 1 2 3 4 5 10
Air Volume (m³/s)
Project :
AHU Ref : Date : 30 - Dec - 2018
S 34.0 32.0 87.0 29.8 110. S 21.9 21.8 99.9 18.1 64.2
M 40.6 23.9 24.6 11.8 71.3 M 36.9 20.8 22.4 8.7 59.7
W 34.0 32.0 87.0 29.8 110. W 21.9 21.8 99.9 18.1 64.2
S 29.3 28.2 92.0 23.9 90.8 S 16.0 15.6 96.1 10.9 43.9
M 39.1 22.5 23.2 10.2 65.8 M 35.0 18.7 19.4 6.8 52.7
W 29.3 28.2 92.0 23.9 90.8 W 16.0 15.6 96.1 10.9 43.9
Mechanical Details
Rotor : Cassette :
WHEEL DIA : 1600 mm DIMENSION : mm (Inch) 1730 (68.11) (W) 1730 (68.11) (H) 325 (12.80) (D)
WHEEL DEPTH 200 mm DRIVER MOTOR: 180 Watts
PURGE ANGLE 7.5 Deg WEIGHT : 246 / 542.18 KG / lbs (NET UNPACKED )
SubstrateThe substrate or wheel matrix should be only of pure aluminum foil, and not from any material,which is combustible or supports combustion,so as to
allow:a)quick and efficient uptake of thermal energy, b)suffi. mass for optimum heat transfer and c)maximum sensible heat recovery at a relatively
low rotational speed of 20 to 25 rpm.
DesiccantThe desiccant should be of 'Ecosorb 300 [3A] type*' belonging to the molecular sieve family ,which should maximize moisture uptake and therefore
maximize latent recovery.The desiccant, of sufficient mass, should be coated with non masking porous binder adhesive on the aluminum substrate
so as to allow quick and easy uptake and release of water vapor.
RotorThe rotor/wheel matrix shall have nearly equal sensible and latent recovery. The weight of desiccant coating and the mass of aluminum foil shall
be in a ratio so as to ensure nearly equal recovery of both sensible and latent heat over the operating range. The rotor shall be made of alternate
flat and corrugated aluminum foil of uniform width.The rotor honeycomb matrix foil should be so wound and adhered as to make a structurally very
strong and rigid media, which shall not get cracked,deformed etc.due to change of temperature or humidity.
CassetteThe DRI cassettes have modern state of the art folded sheet metal cassettes for smaller sizes (up to 2400 mm dia wheel) and epoxy coated
tubular frame work for larger sizes.
Project :
AHU Ref : Date : 30 - Dec - 2018
S 13.0 12.9 98.8 9.2 36.6 S 21.1 15.9 59.1 9.2 44.8
M 40.6 23.9 24.6 11.8 71.3 M 30.1 21.0 44.2 11.8 60.6
W 13.0 12.9 98.8 9.2 36.6 W 21.1 15.9 59.1 9.2 44.8
S 16.0 15.6 95.9 10.9 43.9 S 25.0 18.7 54.9 10.9 53.1
M 36.7 22.3 28.3 10.9 65.1 M 25.0 18.7 54.9 10.9 53.1
W 16.0 15.6 95.9 10.9 43.9 W 25.0 18.7 54.9 10.9 53.1
12671 - 71.5 0 27
Outdoor (O/A) .05
- 177
Supply (S/A) 12068 3.79
10871 3.42
74.87 0 28
Return (R/A) .05
160
Exhaust (E/A) 11474 - -
Mechanical Details
Rotor : Cassette :
WHEEL DIA : 1600 mm DIMENSION : mm (Inch) 1730 (68.11) (W) 1730 (68.11) (H) 325 (12.80) (D)
WHEEL DEPTH 200 mm DRIVER MOTOR: 180 Watts
PURGE ANGLE 7.5 Deg WEIGHT : 222 / 489.29 KG / lbs (NET UNPACKED )
SubstrateThe substrate or wheel matrix should be only of pure aluminum foil, and not from any material,which is combustible or supports combustion,so as to
allow:a)quick and efficient uptake of thermal energy, b)sufficient mass for optimum heat transfer and c)maximum sensible heat recovery at a relatively
low rotational speed of 17 to 20 rpm.
RotorThe rotor/wheel matrix shall have high sensible recovery. The rotor shall be made of alternate flat and corrugated aluminum foil of uniform width.
The rotor honeycomb matrix foil should be so wound and adhered as to make a structurally very strong and rigid media, which shall not get cracked,
deformed etc.due to change of temperature or humidity.
CassetteThe DRI cassettes have modern state of the art folded sheet metal cassettes for smaller sizes (up to 2400 mm dia wheel) and epoxy coated
tubular frame work for larger sizes.
CUSTOMER DETAILS
Customer Name Ramboll Customer Number 73
Address
Town
Postcode
Country
GENERAL DATA
Product Air handling unit Customer reference 7.AHU-E-B1.02
Number off 1 AHU configuration Double deck (opposite)
Energy Efficiency Class A Altitude m 5
Location External Unit velocity m/s 1.37
SFPe kW/m³/s 3.88 SFPv kW/m³/s 3.60
Leakage rate at -400 Pa l/m²/s 0.28 Leakage rate at 700 Pa l/m²/s 0.40
Total weight (each) kg 1102.07 Roof type None
Radiated casework SWL 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz dB(A)
67 59 60 55 51 45 31 61
CASING DATA
Profile type Thermal break / Thermal Panel thickness mm 50 / 50
break
Panel insulation Polyurethane / Polyurethane Insulation density kg/m³ 45 / 45
Base frame material Galvanised steel Base frame height mm 100
EXHAUST DATA
Model TAH 1790 / 1010
Type Floor mounted Air volume m³/s 2.52
External static Pa 500
Internal skin material Galvanised plain 0.7mm External skin material Galv. precoated 0.7mm
SFPe kW/m³/s 1.66 SFPv kW/m³/s 1.58
Operating sound level 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz dB(A)
Inlet dB 85 80 81 85 80 78 71 66 86
Outlet dB 89 82 83 86 86 84 75 69 90
SUPPLY DATA
Model TAH 1790 / 980
Type Floor mounted Air volume m³/s 2.41
External static Pa 500
Internal skin material Galvanised plain 0.7mm External skin material Galv. precoated 0.7mm
SFPe kW/m³/s 2.32 SFPv kW/m³/s 2.11
Operating sound level 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz dB(A)
Inlet dB 88 89 84 83 74 69 63 53 83
Outlet dB 99 99 94 90 89 88 82 75 95
DELIVERY SECTION(S)
Section Width (mm) Height (mm) Length (mm) Baseframe (mm) Weight (kg)
1 1900 1120 290 - 55.86
2 1900 1120 740 - 63.41
3 1900 1120 1233 - 102.45
4 1900 1120 740 - 63.41
5 1900 1120 1340 - 185.57
6 1900 1090 1383 Channel (100) 125.39
7 1900 1090 740 Channel (100) 59.61
8 1900 1090 1233 Channel (100) 190.34
9 1900 1090 740 Channel (100) 59.61
10 1900 1090 1340 Channel (100) 196.44
EXHAUST COMPONENTS
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
SUPPLY COMPONENTS
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
ACCESS 1
Access type Hinged Access side Right
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
ACCESS 1
Access type Hinged Access side Right
1400
100 85
Lw(A) in dB(A)
1200
.5 1 2 3 4 5 10
Air Volume (m³/s)
RPM
500 3300
.4
400 .3 100
2800
300
2400
95
200 2000
75 90
1800
1600
85
100 Lw(A) in dB(A) 1400
80 1200
.4 .5 1 2 3 4 5
Air Volume (m³/s)
Project :
AHU Ref : Date : 30 - Dec - 2018
S 34.0 32.0 87.0 29.8 110. S 21.2 21.1 99.9 17.1 61.7
M 40.6 23.9 24.6 11.8 71.3 M 36.6 20.6 22.2 8.5 58.8
W 34.0 32.0 87.0 29.8 110. W 21.2 21.1 99.9 17.1 61.7
S 29.4 28.3 92.5 24.2 91.7 S 15.9 15.5 96.1 10.8 43.6
M 39.2 22.6 23.4 10.3 66.1 M 35.0 18.7 19.4 6.8 52.7
W 29.4 28.3 92.5 24.2 91.7 W 15.9 15.5 96.1 10.8 43.6
Mechanical Details
Rotor : Cassette :
WHEEL DIA : 1500 mm DIMENSION : mm (Inch) 1630 (64.17) (W) 1630 (64.17) (H) 295 (11.61) (D)
WHEEL DEPTH 200 mm DRIVER MOTOR: 180 Watts
PURGE ANGLE 7.5 Deg WEIGHT : 211 / 465.04 KG / lbs (NET UNPACKED )
SubstrateThe substrate or wheel matrix should be only of pure aluminum foil, and not from any material,which is combustible or supports combustion,so as to
allow:a)quick and efficient uptake of thermal energy, b)suffi. mass for optimum heat transfer and c)maximum sensible heat recovery at a relatively
low rotational speed of 20 to 25 rpm.
DesiccantThe desiccant should be of 'Ecosorb 300 [3A] type*' belonging to the molecular sieve family ,which should maximize moisture uptake and therefore
maximize latent recovery.The desiccant, of sufficient mass, should be coated with non masking porous binder adhesive on the aluminum substrate
so as to allow quick and easy uptake and release of water vapor.
RotorThe rotor/wheel matrix shall have nearly equal sensible and latent recovery. The weight of desiccant coating and the mass of aluminum foil shall
be in a ratio so as to ensure nearly equal recovery of both sensible and latent heat over the operating range. The rotor shall be made of alternate
flat and corrugated aluminum foil of uniform width.The rotor honeycomb matrix foil should be so wound and adhered as to make a structurally very
strong and rigid media, which shall not get cracked,deformed etc.due to change of temperature or humidity.
CassetteThe DRI cassettes have modern state of the art folded sheet metal cassettes for smaller sizes (up to 2400 mm dia wheel) and epoxy coated
tubular frame work for larger sizes.
Project :
AHU Ref : Date : 30 - Dec - 2018
S 13.0 12.9 98.8 9.2 36.6 S 21.5 16.2 57.5 9.2 45.2
M 40.6 23.9 24.6 11.8 71.3 M 29.5 20.9 45.7 11.8 60.0
W 13.0 12.9 98.8 9.2 36.6 W 21.5 16.2 57.5 9.2 45.2
S 15.9 15.5 96.5 10.9 43.8 S 25.0 18.7 54.9 10.9 53.1
M 36.8 22.3 28.1 10.9 65.2 M 25.0 18.7 54.9 10.9 53.1
W 15.9 15.5 96.5 10.9 43.8 W 25.0 18.7 54.9 10.9 53.1
9110 - 73.5 0 28
Outdoor (O/A) .05
- 145
Supply (S/A) 8676 3.09
8183 2.92
75.46 0 29
Return (R/A) .05
138
Exhaust (E/A) 8617 - -
Mechanical Details
Rotor : Cassette :
WHEEL DIA : 1500 mm DIMENSION : mm (Inch) 1630 (64.17) (W) 1630 (64.17) (H) 295 (11.61) (D)
WHEEL DEPTH 200 mm DRIVER MOTOR: 180 Watts
PURGE ANGLE 7.5 Deg WEIGHT : 191 / 420.96 KG / lbs (NET UNPACKED )
SubstrateThe substrate or wheel matrix should be only of pure aluminum foil, and not from any material,which is combustible or supports combustion,so as to
allow:a)quick and efficient uptake of thermal energy, b)sufficient mass for optimum heat transfer and c)maximum sensible heat recovery at a relatively
low rotational speed of 17 to 20 rpm.
RotorThe rotor/wheel matrix shall have high sensible recovery. The rotor shall be made of alternate flat and corrugated aluminum foil of uniform width.
The rotor honeycomb matrix foil should be so wound and adhered as to make a structurally very strong and rigid media, which shall not get cracked,
deformed etc.due to change of temperature or humidity.
CassetteThe DRI cassettes have modern state of the art folded sheet metal cassettes for smaller sizes (up to 2400 mm dia wheel) and epoxy coated
tubular frame work for larger sizes.
CUSTOMER DETAILS
Customer Name Ramboll Customer Number 73
Address
Town
Postcode
Country
GENERAL DATA
Product Air handling unit Customer reference 8.AHU-E-B1.03
Number off 1 AHU configuration Double deck (opposite)
Energy Efficiency Class A Altitude m 5
Location External Unit velocity m/s 1.27
SFPe kW/m³/s 3.94 SFPv kW/m³/s 3.66
Leakage rate at -400 Pa l/m²/s 0.28 Leakage rate at 700 Pa l/m²/s 0.40
Total weight (each) kg 911.14 Roof type None
Radiated casework SWL 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz dB(A)
68 63 62 55 51 46 31 62
CASING DATA
Profile type Thermal break / Thermal Panel thickness mm 50 / 50
break
Panel insulation Polyurethane / Polyurethane Insulation density kg/m³ 45 / 45
Base frame material Galvanised steel Base frame height mm 100
EXHAUST DATA
Model TAH 1590 / 860
Type Floor mounted Air volume m³/s 1.90
External static Pa 500
Internal skin material Galvanised plain 0.7mm External skin material Galv. precoated 0.7mm
SFPe kW/m³/s 1.86 SFPv kW/m³/s 1.79
Operating sound level 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz dB(A)
Inlet dB 88 90 86 89 83 80 77 70 89
Outlet dB 95 95 91 91 88 87 82 74 94
SUPPLY DATA
Model TAH 1590 / 860
Type Floor mounted Air volume m³/s 1.74
External static Pa 500
Internal skin material Galvanised plain 0.7mm External skin material Galv. precoated 0.7mm
SFPe kW/m³/s 2.28 SFPv kW/m³/s 2.04
Operating sound level 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz dB(A)
Inlet dB 82 87 88 83 72 67 61 52 83
Outlet dB 92 96 96 89 85 85 80 73 93
DELIVERY SECTION(S)
Section Width (mm) Height (mm) Length (mm) Baseframe (mm) Weight (kg)
1 1700 970 290 - 49.52
2 1700 970 740 - 56.03
3 1700 970 1233 - 90.79
4 1700 970 740 - 56.03
5 1700 970 1190 - 143.82
6 1700 970 1233 Channel (100) 101.63
7 1700 970 740 Channel (100) 52.87
8 1700 970 1233 Channel (100) 161.12
9 1700 970 740 Channel (100) 52.87
10 1700 970 1190 Channel (100) 146.45
EXHAUST COMPONENTS
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
SUPPLY COMPONENTS
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
ACCESS 1
Access type Hinged Access side Right
Sound Reduction Data 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
0 0 0 0 0 0 0 0
ACCESS 1
Access type Hinged Access side Right
RPM
.4
500 3600
100
400 3200
300 2800
95
2400
200 75
90
2000
85 1800
100 Lw(A) in dB(A) 1600
80 1400
.3 .4 .5 1 2 3 4 5
Air Volume (m³/s)
RPM
.4
500 3600
100
400 3200
300 2800
95
2400
200 75
90
2000
85 1800
100 Lw(A) in dB(A) 1600
80 1400
.3 .4 .5 1 2 3 4 5
Air Volume (m³/s)
Project :
AHU Ref : Date : 30 - Dec - 2018
S 34.0 32.0 87.0 29.8 110. S 21.2 21.1 99.9 17.0 61.7
M 40.6 23.9 24.6 11.8 71.3 M 36.6 20.6 21.9 8.4 58.6
W 34.0 32.0 87.0 29.8 110. W 21.2 21.1 99.9 17.0 61.7
S 29.2 28.2 92.6 23.9 90.7 S 16.2 15.7 95.1 10.9 44.1
M 39.1 22.5 23.2 10.2 65.8 M 35.0 18.7 19.4 6.8 52.7
W 29.2 28.2 92.6 23.9 90.7 W 16.2 15.7 95.1 10.9 44.1
Mechanical Details
Rotor : Cassette :
WHEEL DIA : 1300 mm DIMENSION : mm (Inch) 1430 (56.30) (W) 1430 (56.30) (H) 295 (11.61) (D)
WHEEL DEPTH 200 mm DRIVER MOTOR: 180 Watts
PURGE ANGLE 7.5 Deg WEIGHT : 177 / 390.11 KG / lbs (NET UNPACKED )
SubstrateThe substrate or wheel matrix should be only of pure aluminum foil, and not from any material,which is combustible or supports combustion,so as to
allow:a)quick and efficient uptake of thermal energy, b)suffi. mass for optimum heat transfer and c)maximum sensible heat recovery at a relatively
low rotational speed of 20 to 25 rpm.
DesiccantThe desiccant should be of 'Ecosorb 300 [3A] type*' belonging to the molecular sieve family ,which should maximize moisture uptake and therefore
maximize latent recovery.The desiccant, of sufficient mass, should be coated with non masking porous binder adhesive on the aluminum substrate
so as to allow quick and easy uptake and release of water vapor.
RotorThe rotor/wheel matrix shall have nearly equal sensible and latent recovery. The weight of desiccant coating and the mass of aluminum foil shall
be in a ratio so as to ensure nearly equal recovery of both sensible and latent heat over the operating range. The rotor shall be made of alternate
flat and corrugated aluminum foil of uniform width.The rotor honeycomb matrix foil should be so wound and adhered as to make a structurally very
strong and rigid media, which shall not get cracked,deformed etc.due to change of temperature or humidity.
CassetteThe DRI cassettes have modern state of the art folded sheet metal cassettes for smaller sizes (up to 2400 mm dia wheel) and epoxy coated
tubular frame work for larger sizes.
Project :
AHU Ref : Date : 30 - Dec - 2018
S 13.0 12.9 98.8 9.2 36.6 S 21.7 16.2 56.9 9.2 45.4
M 40.6 23.9 24.6 11.8 71.3 M 29.2 20.8 46.6 11.8 59.7
W 13.0 12.9 98.8 9.2 36.6 W 21.7 16.2 56.9 9.2 45.4
S 16.2 15.7 94.8 10.9 44.1 S 25.0 18.7 54.9 10.9 53.1
M 36.5 22.2 28.5 10.9 64.9 M 25.0 18.7 54.9 10.9 53.1
W 16.2 15.7 94.8 10.9 44.1 W 25.0 18.7 54.9 10.9 53.1
6564 - 73.2 0 28
Outdoor (O/A) .05
- 142
Supply (S/A) 6251 3.03
6185 3
73.57 0 28
Return (R/A) .05
141
Exhaust (E/A) 6498 - -
Mechanical Details
Rotor : Cassette :
WHEEL DIA : 1300 mm DIMENSION : mm (Inch) 1430 (56.30) (W) 1430 (56.30) (H) 295 (11.61) (D)
WHEEL DEPTH 200 mm DRIVER MOTOR: 180 Watts
PURGE ANGLE 7.5 Deg WEIGHT : 161 / 354.84 KG / lbs (NET UNPACKED )
SubstrateThe substrate or wheel matrix should be only of pure aluminum foil, and not from any material,which is combustible or supports combustion,so as to
allow:a)quick and efficient uptake of thermal energy, b)sufficient mass for optimum heat transfer and c)maximum sensible heat recovery at a relatively
low rotational speed of 17 to 20 rpm.
RotorThe rotor/wheel matrix shall have high sensible recovery. The rotor shall be made of alternate flat and corrugated aluminum foil of uniform width.
The rotor honeycomb matrix foil should be so wound and adhered as to make a structurally very strong and rigid media, which shall not get cracked,
deformed etc.due to change of temperature or humidity.
CassetteThe DRI cassettes have modern state of the art folded sheet metal cassettes for smaller sizes (up to 2400 mm dia wheel) and epoxy coated
tubular frame work for larger sizes.