Professional Documents
Culture Documents
Technology Grade 9 March 2017 Test 1
Technology Grade 9 March 2017 Test 1
TECHNOLOGY
TERM 1 TEST
MARCH 2024
GRADE 9
MARKS : 55
DURATION : 2HRS
NAME OF LEARNER:
CLASS :
INSTRUCTIONS:
1. Answer all questions.
2. Write neatly and legibly.
3. All answers must be written in the space provided in the question paper.
4. Follow instructions promptly.
5. All drawings should be in pencil, neat and fully labled.
6. Coloured pencils may be used only for shading where such is required.
QUESTION 1
1.1. In Technology, drawing can be produced using enlarging scale, reducing scale or actual scale.
A. 1:2
B. 1:1
C. 1:0
D. 2:1
1.3. A member of a structure that support the structure on the side of stress is .
A. Column
B. Guy
C. Strut
D. Beam
(1 X 5 = 5)
RAMOTSHERE MOILOA AO TECHNOLOGY GRADE 9 3 MARCH 2017 COMMON TEST
QUESTION 2
2.2. Strength of the material is the degree to which the force can be applied to the
2.4. Corrosion is a chemical term that refers to the gradual destruction of a material.
2.5. An entrance that can accommodate both disabled and abled people is the one with
(1 X 5 = 5)
QUESTION 3
3.1 Match the properties of materials in column A with their properties in column C. Just write the
letter of the correct property in column B
6. Malleability
(1 X 6 = 6)
RAMOTSHERE MOILOA AO TECHNOLOGY GRADE 9 4 MARCH 2017 COMMON TEST
3.2 The arrows on FIGURE 1 below show the direction of forces exerted by the tank and the
direction of the movement of the truck respectively. Use this picture to answer the
question that follows.
Force
Movement
Tank
3.2.1 What is the difference between the force exerted on the truck by the tank and the
force exerted by the moving truck on the ground? (2)
3.2.2 What is the name of the force that is exerted by the tank on the truck? (1)
3.2.3 The tank is said to be exerting an uneven load on the truck. Explain why? (2)
RAMOTSHERE MOILOA AO TECHNOLOGY GRADE 9 5 MARCH 2017 COMMON TEST
3.3 Use the pictures in FIGURE 2 and FIGURE 3 below to answer the questions that follow.
FIGURE 3
3.3.1 Which Figure above experiences uneven load? Give reason for your answer (3)
3.3.2 Do you think the force exerted by the child on the swing is dynamic or static? Give
reason for your answer. (3)
RAMOTSHERE MOILOA AO TECHNOLOGY GRADE 9 6 MARCH 2017 COMMON TEST
3.4 Study FIGURE 4 below and answer the questions that follow.
3.4.1 Which type of force is demonstrated by the two men in FIGURE 4? (1)
3.4.2 What would happen if these two men could keep applying the force until they
overcome the strength of the rope? (2)
RAMOTSHERE MOILOA AO TECHNOLOGY GRADE 9 7 MARCH 2017 COMMON TEST
3.5 Which forces are represented by FIGURE 5 and FIGURE 6 below? (2)
FIGURE 5 FIGURE 6
[ 22 ]
QUESTION 4
Study the following picture and answer the questions that follow.
4.2 Suggest one ways in which this problem can be solved (1)
4.3 What is the indigenous/oldest ways of solving a problem like this? (1)
b) (1)
[6]
RAMOTSHERE MOILOA AO TECHNOLOGY GRADE 9 9 MARCH 2017 COMMON TEST
RAMOTSHERE MOILOA AO TECHNOLOGY GRADE 9 10 MARCH 2017 COMMON TEST
RAMOTSHERE MOILOA AO TECHNOLOGY GRADE 9 11 MARCH 2017 COMMON TEST
RAMOTSHERE MOILOA AO TECHNOLOGY GRADE 9 12 MARCH 2017 COMMON TEST