Professional Documents
Culture Documents
5 2
6
Notes
6
4
2
5 Bypass valve RO 2
6 Pool sensor TS 4
Notes
1
3
4
5 6
Notes
5
3
4
5 Bypass valve RO 2
Notes
3
4
5 Bypass valve RO 2
Notes
4 3
5 2
Notes
5
4
2
6
Notes
3
5
2
4 Bypass valve RO 2
Notes
5
4
6 Bypass valve RO 2
Notes
6
5
4
2
6 Discharge pump RO 2
Notes
3
4 2
I2 PWM feedback
Notes
3
5 2
Notes
3
4 2
5 Bypass valve RO 2
Notes
5 3
2
6 Bypass valve RO 2
Notes
2
4 5
I2 PWM feedback
Notes
4 2
5 Bypass valve RO 2
Notes
5 2
4 Collector sensor 2 TS 4
6 Bypass valve RO 2
Notes
5 2 3 4
6 7
6 Bypass valve RO 2
Notes
2
4
Notes
1 2
3 4
5 6
4 Pool sensor TS 4
Notes
1 2
3 4
5
7
6
4 Pool sensor TS 4
Notes
2 3
4
5 6
Notes
2 3
5
4
6
Notes
Notes
Notes
2. Changes to this schematic diagram are reserved! The reproduction of this sketch,
even in part, is permitted only with the written consent of Vaillant GmbH
3. Observe the planning, installation and subsequent operation necessarily all instal-
lation and operation instructions that were created for the device, or the respective ac-
cessories for other components and the system.
4. Claims for damages against the Vaillant GmbH, for whatever legal reason, including
for violation of an obligation arising from an obligation or tort, are excluded. This does
not, unless mandatory statutory liability, in cases of intent or gross negligence, injury to
life, body or health or the breach of contractual obligation, provided there is a contract
concluded with the user of this sketch. Material contractual obligations are those obli-
gations which the contract has to grant to its content or its purpose; substantially re-
lates to those contractual obligations the fulfillment of which makes the proper execu-
tion of the contract and on which the customer regularly trusts and may trust. The
damages for breach of contract is limited to the typical, foreseeable damage, unless
intent or gross negligence or liability for injury of life, body or health. A change in the
burden of proof to the detriment of the user of this sketch is not connected with the
above regulations.
Notes
Notes
Notes
Notes
Notes
Notes
Notes
Notes
Notes
Hydraulic with bivalent cylinder, solid and fossil boiler, and anti-legionella protection
Notes
Notes
4 Functional description
Boiler
LEG-P
Anti-legionella function
The anti-legionella functions checks if the minimum heating for reduction of legionella
has been achieved in the tank due to heating activity or solar heat within a set interval.
If no sufficient heating has been achieved by these means the controller starts a reheat
cycle, specifically for reduction of legionella.
The fitter must set the parameters based on the applicable general directives and local
requirements. The time of the disinfection cycle can be determined freely.