This document provides connection details for attaching a lintel to a raked truss roof. It specifies using Simpson Strong Tie HTTU4 ties on each side of the lintel, with M12 bolts and welded plates, to connect the lintel to the truss at a 160mm height. It also calls out using 90x45 steel studs underneath with Tylok plates on each side of the connection.
This document provides connection details for attaching a lintel to a raked truss roof. It specifies using Simpson Strong Tie HTTU4 ties on each side of the lintel, with M12 bolts and welded plates, to connect the lintel to the truss at a 160mm height. It also calls out using 90x45 steel studs underneath with Tylok plates on each side of the connection.
This document provides connection details for attaching a lintel to a raked truss roof. It specifies using Simpson Strong Tie HTTU4 ties on each side of the lintel, with M12 bolts and welded plates, to connect the lintel to the truss at a 160mm height. It also calls out using 90x45 steel studs underneath with Tylok plates on each side of the connection.