Professional Documents
Culture Documents
25-The gauge used to measure the thickness of sheet as, plate and paper is:
a. Dial thickness gauge c. Dial bore gauge
b. Dial indictor d. All of these
26-Least count of dial indictor is _____mm.
a. 0.02 c. 0.001
b. 0.01 d. 0.1
27-Dial instruments are easy to use than:
a. Inside calliper c. Vernier instrument
b. Divider d. None of these
28-one revolution of pointer of dial thickness gauge equal to _______mm
a. 0.1 b. 1 c. 2 d. 3
29-Zero error may be removed in:
a. Dial calliper c. Inside calliper
b. Vernier calliper d. Depth gauge
30-Depth bar is the part of:
a. Dial indicator c. Dial thickness gauge
b. Vernier depth gauge d. Dial bore gauge
31-These are mostly used by machinists to measure the inner diameter of bore in motor
engine:
a. Dial indicator c. Dial thickness gauge
b. Dial calliper d. Dial bore gauge
32-It is fixed to the frame indicates the linear displacement of a movable anvil with high
degree of precision:
a. Dial micrometre c. Dial thickness gauge
b. Dial calliper d. Dial bore gauge
e.
33-A vital aid inspection process is the:
a. Co-ordinate measuring machine c. Gear manufacturing machine
b. Gear machine d. Gear testing machine
34-Gear testing machine can help to control:
a. Size of gear c. Type of gear
b. Shape of gear d. Quantity of gear
35-The amount of play between the teeth of mating gear is called:
a. Spur gear c. Standard gear
b. Back lash d. Helical gear
36-If gear are not properly inspected it is obvious that gear will:
a. Not effected c. Failed and effected
b. Effected d. Passed
37- For the proper identification of damaged area during inspection following is used for
best results
a. Standard gear c. Magnifying glass
b. Rack and pinion d. Spur gear
38-Average amount of backlash is:
a. 0.02x module c. 0.06x module
b. 0.04x module d. 0.08x module
39-For checking flatness of a surface, tool used is called:
a. Try square c. Optical flat
b. Straight edge d. Tool maker’s microscope
40-Optical flat are made of:
a. Piece of glass c. Piece of steel
b. Piece of wood d. Piece of metal
21 D 25 A 29 A 33 D 37 C
22 D 26 B 30 B 34 A 38 B
23 A 27 C 31 D 35 B 39 C
24 B 28 B 32 A 36 C 40 A
45-Which one is a metrological tool of the most fundamental importance and greatest
integrity:
a. Try square c. Optical flat
b. Straight edge d. Tool maker microscope
46-an optical projector is a versatile:
a. Micrometre c. Comparators
b. Microscope d. Optical
47-Optical flat are used with a:
a. Monochromatic light c. Fluorescent light
b. Magnifying light d. Clear light
48-Optical flats have uses in:
a. Images c. Vernier
b. Spectrophotometry d. Micrometres
49-Amicroscope couples two stages of:
a. Illumination c. magnification
b. Lighting d. parallelism
50-Electro mechanical device which converts a mechanical displacement in electrical signal
is called:
a. electrical comparator c. both a& b
b. mechanical comparator d. None of these
41 B 43 B 45 D 47 A 49 C
42 B 44 C 46 C 48 B 50 B
(MCQS)CHAPTER # 9 (GEAR INSPECTION AND MEASURMENT)
1-A vital aid inspection process is the:
a. Co-ordinate measuring machine. c. Gear manufacturing machine
b. Gear machine d. Gear testing machine
2-Gear testing machine can help to control:
a. Size of gear c. Type of gear
b. Shape of gear d. Quantity of gear
3-The amount of play between the teeth of mating gear is called:
a. Spur gear c. Standard gear
b. Back lash d. Helical gear
4-if gear are not properly inspected it is obvious that gear will
a. Not effected
b. Effected
c. Failed and effected
d. Passed
5- For a proper identification of damaged area during inspection following is used for best
result:
a. Standard of gear
b. Rack and pinion
c. Magnifying glass
d. Spur gear
6-Average amount of backlash is:
a. 0.02x modules
b. 0.04x modules
c. 0.06x modules
d. 0.08x modules
1 D 3 B 5 C
2 A 4 C 6 B