Professional Documents
Culture Documents
AGRI-CROPS 10
Name:___________________________ Grade & Section:________
Teacher:__________________________ Date:___________
Direction: Read carefully the questions. Encircle the letter of the correct answer.
1.What are hollow tubes with circular cross-section designed to carry fluids from one location to another?
A. drainage B. filters C. hoses D. pumps
2. What type of fitting has opening on four of its end?
A. cross B. tee C. coupling D. wire
3. What irrigation device is used to control the flow of water by partially or fully obstructing the flow of water?
A. elbow B. plug and cap C. reducer D. valves
4. When do you conduct a pre-operational check-up?
A. after operation B. before operation C. during operation D. after an equipment breakdown.
5. What is the reason why check-up of tools and equipment is done?
A. It prevents downtime and accidents at work. B. It is a scheduled activity. C. The user’s manual said so. D. It organizes things.
6.What type of fitting connect pipes that are not the same type. It can be male or female on one end, it can turn a pipe male or female
A. Barb B. Wie c. Adaptor d. Nipple.
7. These are irrigation materials used to eliminate debris from clogging pipes, nozzles and damaging water pump impellers.
A. Fitting B. Filters C.Valves d. Hoses
8. These are objects which are operated by hand to carry out tasks with ease making work efficient and safe.
A. Hand Tools B. Irrigation Materials C. Farm Equipment D. Pre-operational Tools
9. These are substances applied to one surface or both surfaces of materials to be joined together and resist their separation?
A.Valves B. Sealant and Adhesive c. Cross d. Coupling
10. These used to join two hoses, pipes or tapes of the same diameter and type.
A. Coupling B. Tee C. Elbow D.Cross
11. A short fitting made of metals such as copper, brass or steel or chlorinated polyvinyl chloride (CPVC).
A. Cross B. Plug and Cap C. Nipple D. Barb
12. A common farm equipment used in various farm activities including efficient installation of irrigation pipes, hoses and drip
tapes.
A. Tractors B. Excavator C.Water Pump D.Generator
13.These are machines used in digging canals, construction of water reservoirs and installation of culverts.
A. Tractors B. Excavator C.Water Pump D.Generator
14. It is used to cut pipes. It produces a square cut ad much cleaner than hacksaw.
A. Vernier Caliper B. Scissors C. Spade D. Pipe Cutter
15. A measuring tool that ca remain stiff and straight when extended, but retracts into a coil for convenient storage.
A. Ruler B. Vernier Caliper C. Steel Tape Measure D. Pipe Wrench
16. After performing checking of tools and equipment, it is important to tag the defective ones to inform other users that the
tool is defective and is not safe to use.
A. True B. False C. Maybe D. Not all the time
II- ENUMERATION: Choose the correct answer on the box. Write only the letter.
16-19-Guide to prolong the service life of tools (Preventive Maintenance of Farm Tools)
20-24- Pre-operational Inspection of Irrigation Pumps