Professional Documents
Culture Documents
What Are the Properties of the Shengyi Q260 PCB Material - 副本
What Are the Properties of the Shengyi Q260 PCB Material - 副本
This article discusses what the Shengyi Q260 PCB material offers. These include its
general properties, which includes its temperature for glass transition, thermal stress,
coefficient of thermal expansion (Z-axis), volume resistivity, dielectric breakdown,
dissipation factor, dielectric constant, flexural strength, water absorption,
flammability, thermal conductivity, and more.
If you wish to widen your knowledge in this regard, please stay and continue reading.
Table of Contents
The Shengyi Q260 is a material for printed circuit boards, with lots of outstanding
uses. Some include its great thermal conductivity, great ability for mechanical
processes, and great thermal resistance.
Below are the main properties of the Shengyi Q260 PCB material.
Before Tg, the Shengyi Q260 PCB material has a CTE of 28 ppm/℃. After Tg, the
value changes, making it become 265 ppm/℃. Also, at a temperature of 50 to 260
degrees centigrade, the value stands at 3.5%.
Thermal Stress
Another property of this material is thermal stress, which stands at >30s. This value is
possible with two conditions. Also, it occurs at a temperature of 288 degrees
centigrade and with solder dip.
The temperature for glass transition of the Shengyi Q260 PCB material is 122 degrees
centigrade.
Dielectric constant
It also has a dielectric constant of 4.8 at 1MHz. The dielectric constant is dependent
on the frequency. This value is very important for impedance considerations
and signal integrity. Also, these factors are very important to ensure a high electrical
performance.
Dissipation Factor
For dissipation factor, the lower the value, the higher the efficiency of the insulating
system. Furthermore, the Shengyi Q260 PCB material’s dissipation factor or loss
tangent at 1MHz is 0.014. From the value it is clear that this material has a low
dissipation factor.
Also, this means that the ability of this material to serve as a material for insulation or
hold energy is high. Once again, this is one reason why it is very useful for printed
circuit boards.
Water Absorption
The water absorption is at 0.13%. This shows that the Shengyi Q260 PCB material
has a low rate of water absorption. Therefore, you can be sure that this material will
not absorb water easily and that is why it is very useful for different applications.
Thermal Conductivity
The Shengyi Q260 PCB material has a thermal conductivity of 1.0 W/m·K. Also, this
is the value at which the Shengyi Q260 PCB material transports energy as a result of
random molecular motion through a specific temperature gradient.
Arc Resistance
This material also has an arc resistance of 140s. This refers to the material’s resistance
to effects of low-current, high voltage, as well as resisting the formation of any
conducting path along the surface. Also, this value is affected by the ionization degree,
the arc’s cross section and the arc’s length.
This means that the rate at which the transfer of heat occurs by conduction via a
specific area is high. Also, there must be a temperature gradient exit that is
perpendicular to that specific area.
CTI, which means comparative tracking index, reveals the extent at which a printed
circuit board’s insulating material has the ability to resist the flow of any unwanted
current between the board’s traces. This also measures the ability of a PCB
substrate to be able to withstand breakdowns. Also, with the Shengyi Q260 PCB
material, you can be sure it has a high CTI or an Excellent tracking resistance.
Cost effective
This means that the Shengyi Q260 PCB material is very productive and effective with
respect to the amount it costs. It offers lots of great benefits that covers the overall
cost and even offers much more for printed circuit boards.
It is very easy to process Shengyi Q260 PCB material. Processability becomes simple
because of its closeness to the best possible temperatures necessary for processing.
Also, this means that with the Shengyi Q260 PCB material you will easily achieve the
necessary schedules for processing.
The Shengyi Q260 PCB material is applicable in various fields. These include power
base boards, led lighting and display, household electrical machines, and automotive
electronics.
The Shengyi Q260 PCB material is very useful in household electrical machines.
These machines aid household functions like food preservation, cleaning, and cooking.
Some of these household appliances include microwave, kettle, blender, and
refrigerator.
The Shengyi Q260 PCB material is also applicable in Led lighting and display. This
pcb material can be found in FLB capacitors. These capacitors aid in regulating the
quantity of electricity that flows into a specific lighting fixture.
This material is also useful in power base boards due to its high quality. It brings in all
these qualities into the power base boards, thereby ensuring its reliability. This is why
this heating system effectively controls your room’s temperature.
Automotive electronics
You can also apply the Shengyi Q260 PCB material into automotive electronics.
These include those electronic systems used in radios, vehicles, computers, ignition,
in-car entertainment, etc.
Conclusion
The Shengyi Q260 PCB material has a lot of great properties and it offers great value
for your money. Choosing the Shengyi Q260 material for your printed circuit board
also ensures the reliability of your product.
Related Posts:
https://www.raypcb.com/shengyi-q260-pcb/