You are on page 1of 3

Herbert Morrison Technical High School

Industrial Technology Department


Electrical Technology
LAB #3

COURSE: CONSTRUCTION

UNIT: Electrical & Electronic Drafting

This assignment is an individual assignment. The document must be Uploaded to GOOGLE


CLASSROOM on the due date specified. Please save the assignment as a PDF and use the
standard cover page for projects prior to uploading.

DESIGN SPECIFICATION:

Figure 1 shows a floor plan of a one- bedroom studio apartment. As a young Electrical
Engineers/ Electricians you are required to design an electrical system that will distribute power
to the client apartment.

 The client requires lights, plugs and a main breaker installed, along with the following
items listed in the table below.
ITEM# Item Description Quantity
1 220V, 2000W Washing machine 1
2 220V, 3000 W Range/ Stove 1
3 110V, 1.5 KW Microwave oven 1
4 110V, 2500W Refrigerator 1

FIG. 1- Showing floor plan for a one-bedroom apartment

Objectives:

The designer should produce the following diagrams adhering to JS21 standards.

1. Block diagram
2. One-line diagram

Page 1 of 3
Herbert Morrison Technical High School
Industrial Technology Department
Electrical Technology
LAB #3
3. Electrical Floor plan
4. Conduit-run diagram
5. Schematic diagrams for final circuit
6. Wiring diagrams for final circuits

Page 2 of 3
Herbert Morrison Technical High School
Industrial Technology Department
Electrical Technology
LAB #3

Electrical diagrams/drawings must be done using Cad soft. Drawing must be on letter size
paper.

NB# - Submitting other persons work as yours is called plagiarism and will result in a ZERO (0).

Late assignment will be accepted!!!

Page 3 of 3

You might also like