Professional Documents
Culture Documents
4.15 Power Supply Unit (#50001 or Later) 4. Release the clamps, and remove the screws.
{SP:INDEX}
Removal Procedures
1. Remove the Power Supply Assembly.
{MC:4.14_Power Supply Assembly (#50001 or Later)}
Reinstallation Procedures
u NOTE u
To install the power supply unit, securely attach the ground wire.
For reinstallation, reverse the removal steps.
Measure the voltage in accordance with the table in “l#50001 or Later and #60001 or Later”.
{MT:8.2.2_Checking the Voltage on Test Pins}
{MT:8.3.2_Checking the Voltage on Test Pins}
{MT:8.5.2_Checking the Voltage on Test Pins}
MC-30
4.16 PSU29A Board (#50001 or Later) 3. Remove the screws.
{SP:INDEX}
CAUTION
When servicing any printed circuit board, be sure to wear an anti-static
wristband to ground your body. If your body is not grounded, static electricity
built on your body may cause damage to electronic parts on the board.
Removal Procedures
1. Remove the Power Supply Assembly.
{MC:4.14_Power Supply Assembly (#50001 or Later)}
Reinstallation Procedures
For reinstallation, reverse the removal steps.
Measure the voltage in accordance with the table in “l#50001 or Later and #60001 or Later”.
{MT:8.2.2_Checking the Voltage on Test Pins}
{MT:8.3.2_Checking the Voltage on Test Pins}
{MT:8.5.2_Checking the Voltage on Test Pins}
011-201-11E
06.29.2012 FM6046