Professional Documents
Culture Documents
Shooting Skull Targets - Benchrest Rules, Points and Training Targets Guide
Shooting Skull Targets - Benchrest Rules, Points and Training Targets Guide
NG AR
TI
17cm
OO
GE
Targ & A4
SH
TS
Inclu ets
ded
Permitted Airguns
You can use .177 .20 & .22 In Spring, Co2 and PCP format.
We suggest splitting into two groups, one group of springers and one group of CO2 / PCP airguns.
Sights
You can use either open or telescopic sights at any magnification level.
You can support the rear of the gun by hand or small sandbag.
You CANNOT use any support where the front and back rest are connected.
Scoring
Points run between 5 and 10.1 depending on where the target is hit.
If more than one hit is placed inside the target outer bounds, the target becomes void and zero points are
awarded.
On the Shooting Skulls Full Size A3 Target the maximum total of points is 252.5
The full size target is based on the world benchrest targets, for professional competitions we suggest using
the full size target. These targets must be printed on a A3 Printer on A3 Card or thick paper with the
Actual Size box ticked in the print settings.
For Home, training and non professional settings we suggest using the A4 or 17cm Targets.
On the Shooting Skulls 17cm Target the maximum total points is 90.9
Please Note:
The rules and targets are general and are not a full comprehensive set of rules and standards for all benchrest competitions.
If you require the full set of rules, standards and scoring for a benchrest competition you are taking part in please contact the event
organiser.
Shooting Skull Targets have designed the target and rules to give you an insight into the world of benchrest shooting.
HIT
5 6 789 10 5 6 789
1 Score 1 Score 5
If a shot is over the ten with white all the way If a shot touches or breaks the 8 ring then
around it and it does not touch any other lines only 10 is awarded.
award a x or 10.1
Score x Score 10
These targets have been designed for 17cm target holders and pellet catchers.
When printing ensure that Actual Size is ticked on the print dialogue page.
"
Shooting Skull Targets 25m Benchrest Training Target
Date:______/______/______.
X’s______________
CUT ALONG THE BLACK LINES TO FIT THIS TARGET IN A 17cm TARGET HOLDER
Competitor_____________________
Target#______________
SHOOTINGSKULLTARGETS.WORDPRESS.COM
This target has been designed for training only, each target is the same size as the competition targets..
1 Score 2 Score 3 Score 4 Score
SHOOTINGSKULLTARGETS.WORDPRESS.COM