Professional Documents
Culture Documents
9
STAINLESS STEEL BEARING
SSUCPAS200 SERIES
AND HOUSING
Even under the harshest conditions - sulfuric, nitric or acetic acids and in contaminated or uncontam- Two great options for severe conditions With an eye toward economy and in addition to contamination resistance, these PEER units are
inated water conditions, PEER’s all stainless steel units provide excellent corrosion resistance. designed with black oxide inserts and electroless nickel plated housings. The results are mounted ball
PEER Thermoplastic housings will cope with severe wash down conditions and
bearing units ideal for applications requiring corrosion resistance superior to the protection provided
n Stainless steel housings are designed with solid bases/backs and smooth surfaces to allow for temperatures to 285˚F and have a tensile strength of 17,300 PSI (ASTM D638).
by conventional painted cast or ductile iron housings.
complete and easy wash down. They are resistant to moisture absorption and have high mechanical properties.
These units maintain excellent chemical resistant ratings even in contact with n Housings plated with .001” thick electroless, high phosphorous (+10%) nickel.
n Stainless steel bearings are designed with extended inner rings for shaft stability and set screw hydrochloric, sulfuric, nitric and acetic acids. In addition, they can resist most
locking for bidirectional applications.* hydroxides and alcohols. n Electroless nickel plated over premium (Grade 30) cast iron or high strength 65-45-12 ductile iron.
n Standard closures include a stainless steel slinger over a full contact silicone seal to form a double n Housings are made from G.E. Valox® virgin PBT thermoplastic material and are n Bearing available in all standard locking devices; set screw, eccentric locking collars or premium
barrier of protection during operation and wash down. designed with solid bases/backs and smooth surfaces to allow for complete and GRIP-IT™ locking collars.
n Stainless steel bearings are filled with F A/USDA (approved for incidental food contact) water/ easy wash down. n Black oxide bearings designed with slingers and full
wash resistant, odorless, tasteless Mobilgrease FM102. n Stainless steel and stainless/zinc chromate bearings are designed contact metal shroud seals for maximum protection.
n Stainless steel units are available from stock:* with extended inner rings for shaft stability and set screw n Castings available in any style listed in the PEER catalog.
Pillow blocks (P) locking for bidirectional applications.*
Tapped base pillow blocks (PAS) n Black oxide bearings are available in all common inch
n Standard closures include a stainless steel slinger over and metric shaft sizes.
Two-bolt flange (F ) a full contact silicone seal to form a double barrier of
Three-bolt flange (FB) protection during operation and wash down.
Four-bolt flange (F
n Stainless steel and stainless/zinc chromate bearings
n Stainless steel bearings are available in common inch and metric are filled with F A/USDA (approved for incidental food
shaft sizes ranging from ½” to 1½” and 20mm to 40mm.* contact) water/wash resistant, odorless, tasteless
Mobilgrease FM102.
n Thermoplastic units are available from stock:*
Pillow blocks (P)
Tapped base pillow blocks (PAS)
Two-bolt flange (F )
Three-bolt flange (FB)
Four-bolt flange (F)
Hanger (HA)
Take-up (T)
*For alternative locking devices, additional housing styles and bore sizes,
please contact your PEER Bearing Sales Representative.
Corrosion Resistant Mounted Units... To operate in virtually any Corrosive Environment
Stainless Steel units… PBT Thermoplastic Housings with Stainless Steel Electroless Nickel plated…
The clear choice for EXTREME Bearings…or…PBT Thermoplastic Housings with for moderate contamination conditions
conditions with heavier loads. Stainless/Zinc Chromate Bearings…
Even under the harshest conditions - sulfuric, nitric or acetic acids and in contaminated or uncontam- Two great options for severe conditions With an eye toward economy and in addition to contamination resistance, these PEER units are
inated water conditions, PEER’s all stainless steel units provide excellent corrosion resistance. designed with black oxide inserts and electroless nickel plated housings. The results are mounted ball
PEER Thermoplastic housings will cope with severe wash down conditions and
bearing units ideal for applications requiring corrosion resistance superior to the protection provided
n Stainless steel housings are designed with solid bases/backs and smooth surfaces to allow for temperatures to 285˚F and have a tensile strength of 17,300 PSI (ASTM D638).
by conventional painted cast or ductile iron housings.
complete and easy wash down. They are resistant to moisture absorption and have high mechanical properties.
These units maintain excellent chemical resistant ratings even in contact with n Housings plated with .001” thick electroless, high phosphorous (+10%) nickel.
n Stainless steel bearings are designed with extended inner rings for shaft stability and set screw hydrochloric, sulfuric, nitric and acetic acids. In addition, they can resist most
locking for bidirectional applications.* hydroxides and alcohols. n Electroless nickel plated over premium (Grade 30) cast iron or high strength 65-45-12 ductile iron.
n Standard closures include a stainless steel slinger over a full contact silicone seal to form a double n Housings are made from G.E. Valox® virgin PBT thermoplastic material and are n Bearing available in all standard locking devices; set screw, eccentric locking collars or premium
barrier of protection during operation and wash down. designed with solid bases/backs and smooth surfaces to allow for complete and GRIP-IT™ locking collars.
n Stainless steel bearings are filled with F A/USDA (approved for incidental food contact) water/ easy wash down. n Black oxide bearings designed with slingers and full
wash resistant, odorless, tasteless Mobilgrease FM102. n Stainless steel and stainless/zinc chromate bearings are designed contact metal shroud seals for maximum protection.
n Stainless steel units are available from stock:* with extended inner rings for shaft stability and set screw n Castings available in any style listed in the PEER catalog.
Pillow blocks (P) locking for bidirectional applications.*
Tapped base pillow blocks (PAS) n Black oxide bearings are available in all common inch
n Standard closures include a stainless steel slinger over and metric shaft sizes.
Two-bolt flange (F ) a full contact silicone seal to form a double barrier of
Three-bolt flange (FB) protection during operation and wash down.
Four-bolt flange (F
n Stainless steel and stainless/zinc chromate bearings
n Stainless steel bearings are available in common inch and metric are filled with F A/USDA (approved for incidental food
shaft sizes ranging from ½” to 1½” and 20mm to 40mm.* contact) water/wash resistant, odorless, tasteless
Mobilgrease FM102.
n Thermoplastic units are available from stock:*
Pillow blocks (P)
Tapped base pillow blocks (PAS)
Two-bolt flange (F )
Three-bolt flange (FB)
Four-bolt flange (F)
Hanger (HA)
Take-up (T)
*For alternative locking devices, additional housing styles and bore sizes,
please contact your PEER Bearing Sales Representative.
Corrosion Resistant Mounted Units... To operate in virtually any Corrosive Environment
Stainless Steel units… PBT Thermoplastic Housings with Stainless Steel Electroless Nickel plated…
The clear choice for EXTREME Bearings…or…PBT Thermoplastic Housings with for moderate contamination conditions
conditions with heavier loads. Stainless/Zinc Chromate Bearings…
Even under the harshest conditions - sulfuric, nitric or acetic acids and in contaminated or uncontam- Two great options for severe conditions With an eye toward economy and in addition to contamination resistance, these PEER units are
inated water conditions, PEER’s all stainless steel units provide excellent corrosion resistance. designed with black oxide inserts and electroless nickel plated housings. The results are mounted ball
PEER Thermoplastic housings will cope with severe wash down conditions and
bearing units ideal for applications requiring corrosion resistance superior to the protection provided
n Stainless steel housings are designed with solid bases/backs and smooth surfaces to allow for temperatures to 285˚F and have a tensile strength of 17,300 PSI (ASTM D638).
by conventional painted cast or ductile iron housings.
complete and easy wash down. They are resistant to moisture absorption and have high mechanical properties.
These units maintain excellent chemical resistant ratings even in contact with n Housings plated with .001” thick electroless, high phosphorous (+10%) nickel.
n Stainless steel bearings are designed with extended inner rings for shaft stability and set screw hydrochloric, sulfuric, nitric and acetic acids. In addition, they can resist most
locking for bidirectional applications.* hydroxides and alcohols. n Electroless nickel plated over premium (Grade 30) cast iron or high strength 65-45-12 ductile iron.
n Standard closures include a stainless steel slinger over a full contact silicone seal to form a double n Housings are made from G.E. Valox® virgin PBT thermoplastic material and are n Bearing available in all standard locking devices; set screw, eccentric locking collars or premium
barrier of protection during operation and wash down. designed with solid bases/backs and smooth surfaces to allow for complete and GRIP-IT™ locking collars.
n Stainless steel bearings are filled with F A/USDA (approved for incidental food contact) water/ easy wash down. n Black oxide bearings designed with slingers and full
wash resistant, odorless, tasteless Mobilgrease FM102. n Stainless steel and stainless/zinc chromate bearings are designed contact metal shroud seals for maximum protection.
n Stainless steel units are available from stock:* with extended inner rings for shaft stability and set screw n Castings available in any style listed in the PEER catalog.
Pillow blocks (P) locking for bidirectional applications.*
Tapped base pillow blocks (PAS) n Black oxide bearings are available in all common inch
n Standard closures include a stainless steel slinger over and metric shaft sizes.
Two-bolt flange (F ) a full contact silicone seal to form a double barrier of
Three-bolt flange (FB) protection during operation and wash down.
Four-bolt flange (F
n Stainless steel and stainless/zinc chromate bearings
n Stainless steel bearings are available in common inch and metric are filled with F A/USDA (approved for incidental food
shaft sizes ranging from ½” to 1½” and 20mm to 40mm.* contact) water/wash resistant, odorless, tasteless
Mobilgrease FM102.
n Thermoplastic units are available from stock:*
Pillow blocks (P)
Tapped base pillow blocks (PAS)
Two-bolt flange (F )
Three-bolt flange (FB)
Four-bolt flange (F)
Hanger (HA)
Take-up (T)
*For alternative locking devices, additional housing styles and bore sizes,
please contact your PEER Bearing Sales Representative.
MATERIAL SPECIFICATIONS Interchange for PEER’s Corrosion-Resistant Mounted Units
Available in a full range of popular sizes PEER Corrosion-Resistant
Bearing Units
SSUCP200 Series** SSUCP200-PBT Series**
All Stainless Steel Bearing/ Housing Unit Stainless Steel Bearing w/PBT BEARING STYLE DESCRIPTION PEER MRC AMI
1. Stainless steel AISI 440C (Thermoplastic) Housing
2. Stainless steel AISI 440C 1. Stainless steel AISI 440C STAINLESS STEEL BEARING
SSUCP200 SERIES MUCP200 SERIES
AND HOUSING
3. Stainless steel AISI 302 2. Stainless steel AISI 440C
4. Stainless steel AISI 420 3. Stainless steel AISI 302 PILLOW BLOCK STAINLESS BEARING AND
SUCP200-PBT SERIES CPB100-SSG SERIES MUCPPL200 SERIES
THERMOPLASTIC HOUSING
5. FDA compliant silicone rubber (-10ºF to 220ºF) 4. Stainless steel AISI 420
6. Stainless steel AISI 302 5. FDA compliant silicone rubber (-10ºF to 220ºF) ZINC BEARING AND
ZUCP200-PBT SERIES CPB100-ZM SERIES UCPPL200 MZ SERIES
THERMOPLASTIC HOUSING
7. Solid base stainless steel AISI 304 6. Stainless steel AISI 302
8. Stainless steel AISI 304 7. G.E. Valox® 420 glass filled P T (thermoplastic) solid base STAINLESS STEEL BEARING
SSUCF200 SERIES
AND HOUSING
8. Stainless steel zerk and stainless steel lined zerk hole for
added strength STAINLESS BEARING AND
4-BOLT FLANGE THERMOPLASTIC HOUSING
SUCF200-PBT SERIES C4F100-SSG SERIES MUCFPL200 SERIES
9. Stainless steel bolt bushing for added strength
ZINC BEARING AND
ZUCF200-PBT SERIES C4F100-ZM SERIES UCFPL200 MZ SERIES
THERMOPLASTIC HOUSING
ZERK & INNER/OUTER
RING SLINGER STAINLESS STEEL BEARING
SSUCFT200 SERIES MUCFL200 SERIES
ZERK HOLE 8 6 AND HOUSING
1
2-BOLT FLANGE STAINLESS BEARING AND
SUCFT200-PBT SERIES C2F100-SSG SERIES MUCNFL200 SERIES
THERMOPLASTIC HOUSING
SEAL
3 RETAINER 5 ZINC BEARING AND
ZUCFT200-PBT SERIES C2F100-ZM SERIES UCNFL200 MZ SERIES
THERMOPLASTIC HOUSING
2 BALLS
STAINLESS STEEL BEARING
SSUCFB200 SERIES
AND HOUSING
9
STAINLESS STEEL BEARING
SSUCPAS200 SERIES
AND HOUSING
9
STAINLESS STEEL BEARING
SSUCPAS200 SERIES
AND HOUSING