Professional Documents
Culture Documents
No :
Attch : 1 file
Subject: Test results of shear wall components b-panel PT. Beton Elemenindo Putra
I. Introduction
1.1 Types / number of samples : Test object is a component of shear wall structure Rigid full wall panels
(without openings) is mounted on a concrete cradle (parallel to the
direction of lateral loading), 2 object test
1.2 Dimensional test object : 2444 mm x 115 mm x 3005 mm
1.3 Concrete mounting dimensions : 2700 mm x 595 mm x 305 mm
1.4 Type of test : Pseudo lateral load test of dynamic back and forth
1.5 Test date : 25th Januari 2008 (test object 1)
1st Februari 2008 (test object 2)
All the test results data, curves and crack patterns due to the load can be seen in appendix
Note: The data is valid only up to 0.25% drift, this is because the next cycle is affected by the upward
movement of the end walls, suspended by a hydraulic vertical jack so that load would increase again.