You are on page 1of 6

FIREPAK-E21 &

FIREPAK-ED21

Fire
Pumps Set

Designation of Fire Pumps Set The first pump to be triggered is the jockey pump in the set. If this pump
cannot restore the pressure level, then one of main pumps starts.
FIREPAK - E 2 1 - 120 / 80 - WTM 80-250 / 55 + DJ MV Since there is more than one main pump, the pumps start in cascade
FIREPAK: Package Type Fire Pumps Set sequence with the starting pressure switches set at different pressure
E: All pumps in the set electric driven levels.
2: No. main pumps
1: no. jockey pump The pressure switches of the main pumps are used for automatic starting
120: Rated Flow per main pump (m3/h) and adjustable time automatic stopping. Weekly test system is included
80: Rated Pressure (Hm) in the sets which are above 7,5 kW main pumps’ power. The membrane
WTM 80-250/55: 1 main + 1 stand by pump type of expansion tank with the capacity of 24 liters-16 bar execution is
DJ MV: Jockey Pump Set being mounted in fire pumps set for the absorbtion of water hammer.

FIREPAK - ED 2 1 - 120 / 80 - WTM 80-250 / 55 + EKM 4102 + DJ MV Pumps


FIREPAK: Package Type Fire Pumps Set
ED: 1 electric main + 1 diesel driven stand by pump Main pumps are:
2: No. main pumps NMD Series: Horizontal, Monoblock, end-suction, bronze fitted
1: no. jockey pump centrifugal pumps
120: Rated Flow per main pump (m3/h) WTM Series: Horizontal, close-coupled, end-suction, centrifugal pumps
80: Rated Pressure (Hm) For NMS and WTM pumps; our standard delivery is cast iron execution.
WTM 80-250/55: Electric driven main pump Bronze fitted executions are optional.
EKM 4102: Diesel Driven Main Pump
DJ MV: Jockey Pump Set Jockey Pump is:
TP Series: Horizontal, monoblock, peripheral constructed centrifugal
Construction pumps
MV series: Vertical, multi-staged, stainless steel constructed off-line
Fire pumps set constructed for feeding water to automatic fire fighting centrifugal pumps.
systems and units with hydrants and sprinklers.
All pumps are mechanical sealed.
Units are composed of 2 main pumps and one jockey pump set with The maximum pressure developed by the jockey pump is always greater
which the system pressure level can be maintained without having to than the pressure of the main pumps.
start the main pumps.
Electric Motors:
The main pumps are always one active + 100% one stand by, and stand • 2-pole induction type, 50 Hz, n=2900 rpm, IEC standardized, TEFC Type
by main pump can be either electric driven or diesel driven. • Three-phase 230/400V +/-10% up to 3 kW, 400/690V +/-10% 4kW and
higher
Operation • Insulation Class F
The pumps start operating after a fall in the pressure level in the fire • Protection Class IP55
extinguishing system. • Construction in accordance with IEC 60034

997
FIREPAK-E21 & FIREPAK-ED21
Fire Pumps Set

Specifications

• Other voltage and frequency ratings and ambient temperatures available • Mains input 3~50/60 Hz 400V+/-10%
on request. • 400V/24V transformer for auxiliary circuits
• Very low voltage input for control via 1 caller/running pressure switches
Diesel Engines: (NO contact with pressure system and electric pump stationary: on
Diesel engines are equipped with NMD, NMS and WTM series of our pumps. closure of the contact the pump starts up)
They are direct-injection types fitted with electric control box, fuel tank, • Very low voltage input MIN LEVEL FLOAT SWITCH
starter battery and exhaust silencer. • AUTOMATIC-0-MANUAL (EMERGENCY) selector: in AUTOMATIC position
The cooling of engine can be by air, or water cooled by internal cooling electric pump start-up via signals from caller pressure switch; in
system loop. MANUAL(EMERGENCY) position electric pump start-up manual by means
of START/STOP buttons; in “0” position, pump start-up disabled.
Hydraulic Components • Pump MANUAL START selector for manual test
• All pumps in fire system are being delivered on a common base plate • Voltmeter and ammeter
with suction and discharge manifolds as a package type, ready for use. • Green light for motor on
• The controllers of pumps are also being mounted ın this common base • Red light for THERMAL PROTECTION
plate complete with internal cabling between controllers and motors/ • Blue light for POWER SUPPLY
engines. • Settable timed delay of pump shutdown
• Each main pump in the system has its own eccentric reducer + butterfly • Electric pump control contactors sized to AC3
valve at suction side and concentric reducer + butterfly valve + check • Timed, settable Star-Delta contactor switching
valve at discharge side. • Timer for weekly test (optional)
• Manometer is fitted on discharge manifold. • Motor protection fuses
• Pressures switch one for each pump in the set, and expansion tank is • Current transformer for 1 phase
being mounted on discharge manifold. • Auxiliary protection fuses
• Jockey pump is fitted with inlet/outlet valves and check valve and • General disconnect switch with door lock
dry running protection float switch equipped in its controller on the • Alarm output with contact for signal “MOTOR ON”(C-NC-NO)
common base plate of fire pumps set. • Alarm output with contact for signal “THERMAL PROTECTION” (C-NC-NO)
• For jockey pump
Electric Boxes - Control input from NO contact (pressure switch)
Firepak -E21 Fire Pumps Set Electric Controller features are as follows; - Alarm control input from NO contact (float/pressure switch)
This equipment enables automatic or manual management of an electric - Input for motor winding thermal protection
Start-delta starting pump according. They are assembled in painted sheet - Push buttons for operating motor in “Automatic-Off-Manual” modes
metal housing with IP55 protection class and made in accordance with the - “Mains power on” LED
CEI standards in force. - “Alarm” LED for min/max water level
• Electric Star-Delta starting pump electromechanical panel. - “Motor on” LED

998
FIREPAK-E21 & FIREPAK-ED21
Fire Pumps Set

Specifications

- “Motor protection enabled” LED - Battery voltmeter


- “Automatic” LED (this is on the AUTOMATIC push-button) - Totalhour meter
- Restore protection button - Partial hourmeter
- Adjustable motor protection (motor current trimmer: 2 <> 22A or 20 - Starting counter
<>44A) - Starting failures counter
- Protection activation time: 5” - Fuel level indicator
- Alarm output with switching NO-C-NC contacts, capacity 16A 250V (resi - Tachometer
stive load) • Simultaneous reading of the instruments with the running engine, fuel
- Single phase version adapted for the insertion of a capacitor (not level indicator, tachometer, hour-meter
included) • Automatic faults surveillance with messages on the display
• Metal casing • Texts in 6 languages: Italian, English, French, German, Spanish and
• Output with cable holder Portuguese
• IP55 Protection rating • Glow plugs preheating management or engine heating cooling
• Ambient temperature: -5/+40°C • Preventive maintenance warning
• Relative humidity 50% at 40°C (condensate free) • Programmable weekly selftest
• Available fully programmable input for anomaly or water pump
Diesel Engine Pump Controller-Firepak ED21 protection (Protection device used in irrigation systems)
• Electromechanical control panel for diesel pump • CAN Bus SAE J1939
• Input voltage 1~50/60 Hz 230V 8A max • Possibility of starting the engine when the charge of the battery is low
• Input from 1 piece external lead batteries for control of the starting • Anomaly historical record (including data from the last 100 occurred
motor and supply of auxiliary circuits anomalies)
• Very low voltage input for control from 1 pieces call/start pressure • Signaling lights
switches in series • With timer for delay of stop of the pump adjustable
• Electronic unit for diesel pump control • Auxiliary protection fuses
• Selector with push button AUT-MAN, in automatic position starting of • Main switch with interlocking door
the diesel pump by electronic unit in MANUAL position starting of the • General alarm output contact
diesel pump by start push button of the electronic unit • Box in ABS or metallic box
• Pushbuttons for manual start of the diesel pump • Output with cable holder
• Pushbutton for manual shut off of the diesel pump • Protection IP54
• Pushbutton for scrolling the functions of the unit • Ambient temperature: -5°C/+40°C
• With the running engine, the engine instruments are in the event of a • Relative humidity 50% at 40°C (not condensed)
fault instead of the measurement, the display shows the message of the
occurred fault.

999
FIREPAK-E21 & FIREPAK-ED21
Fire Pumps Set

Specifications

1000
FIREPAK-E21 & FIREPAK-ED21
Fire Pumps Set

Specifications

Main Pump Standby Pump Jockey Pump Diameter


Q H
Model Power Power Power
(m3/h) (mWC) Model Model Model Suction Discharge
(kW) (kW) (kW)
12 45 FIREPAK-E21 12/45 WTM 32-200 4 WTM 32-200 4 DJ-MV 705 1,8 DN100 DN65
12 65 FIREPAK-E21 12/65 WTM 32-250 5,5 WTM 32-250 5,5 DJ-MV 708 3 DN100 DN65
12 75 FIREPAK-E21 12/75 WTM 32-250 7,5 WTM 32-250 7,5 DJ-MV 708 3 DN100 DN65
12 85 FIREPAK-E21 12/85 WTM 32-250 7,5 WTM 32-250 7,5 DJ-MV 708 3 DN100 DN65
18 40 FIREPAK-E21 18/40 WTM 32-200 4 WTM 32-200 4 DJ-MV 705 1,8 DN100 DN65
18 55 FIREPAK-E21 18/55 WTM 32-250 5,5 WTM 32-250 5,5 DJ-MV 708 3 DN100 DN65
18 65 FIREPAK-E21 18/65 WTM 32-250 7,5 WTM 32-250 7,5 DJ-MV 708 3 DN100 DN65
18 75 FIREPAK-E21 18/75 WTM 32-250 7,5 WTM 32-250 7,5 DJ-MV 708 3 DN100 DN65
24 40 FIREPAK-E21 24/40 WTM 40-200 5,5 WTM 40-200 5,5 DJ-MV 705 1,8 DN125 DN80
24 50 FIREPAK-E21 24/50 WTM 40-200 7,5 WTM 40-200 7,5 DJ-MV 705 1,8 DN125 DN80
24 55 FIREPAK-E21 24/55 WTM 40-250 9,2 WTM 40-250 9,2 DJ-MV 706 2,2 DN125 DN80
24 65 FIREPAK-E21 24/65 WTM 40-250 11 WTM 40-250 11 DJ-MV 708 3 DN125 DN80
24 75 FIREPAK-E21 24/75 WTM 40-250 15 WTM 40-250 15 DJ-MV 708 3 DN125 DN80
36 45 FIREPAK-E21 36/45 WTM 40-200 7,5 WTM 40-200 7,5 DJ-MV 705 1,8 DN125 DN80
36 55 FIREPAK-E21 36/55 WTM 40-250 11 WTM 40-250 11 DJ-MV 706 2,2 DN125 DN80
36 70 FIREPAK-E21 36/70 WTM 40-250 15 WTM 40-250 15 DJ-MV 708 3 DN125 DN80
48 40 FIREPAK-E21 48/40 WTM 50-250 9,2 WTM 50-250 9,2 DJ-MV 705 1,8 DN125 DN100
48 50 FIREPAK-E21 48/50 WTM 50-250 11 WTM 50-250 11 DJ-MV 705 1,8 DN125 DN100
48 60 FIREPAK-E21 48/60 WTM 50-250 15 WTM 50-250 15 DJ-MV 706 2,2 DN125 DN100
48 70 FIREPAK-E21 48/70 WTM 50-250 18,5 WTM 50-250 18,5 DJ-MV 708 3 DN125 DN100
48 80 FIREPAK-E21 48/80 WTM 50-250 22 WTM 50-250 22 DJ-MV 708 3 DN125 DN100
66 40 FIREPAK-E21 66/40 WTM 50-250 11 WTM 50-250 11 DJ-MV 705 1,8 DN125 DN100
66 50 FIREPAK-E21 66/50 WTM 50-250 15 WTM 50-250 15 DJ-MV 706 2,2 DN125 DN100
66 60 FIREPAK-E21 66/60 WTM 50-250 18,5 WTM 50-250 18,5 DJ-MV 708 3 DN125 DN100
66 70 FIREPAK-E21 66/70 WTM 50-250 22 WTM 50-250 22 DJ-MV 708 3 DN125 DN100
80 45 FIREPAK-E21 80/45 WTM 65-200 18,5 WTM 65-200 18,5 DJ-MV 705 1,8 DN150 DN125
80 55 FIREPAK-E21 80/55 WTM 65-200 22 WTM 65-200 22 DJ-MV 706 2,2 DN150 DN125
80 70 FIREPAK-E21 80/70 WTM 65-250 30 WTM 65-250 30 DJ-MV 708 3 DN150 DN125
80 80 FIREPAK-E21 80/80 WTM 65-250 37 WTM 65-250 37 DJ-MV 708 3 DN150 DN125
90 50 FIREPAK-E21 90/50 WTM 65-250 22 WTM 65-250 22 DJ-MV 706 2,2 DN150 DN125
90 60 FIREPAK-E21 90/60 WTM 65-250 30 WTM 65-250 30 DJ-MV 708 3 DN150 DN125
90 69 FIREPAK-E21 90/69 WTM 65-250 30 WTM 65-250 30 DJ-MV 708 3 DN150 DN125
90 80 FIREPAK-E21 90/80 WTM 65-250 37 WTM 65-250 37 DJ-MV 708 3 DN150 DN125
115 45 FIREPAK-E21 115/45 WTM 65-250 22 WTM 65-250 22 DJ-MV 706 2,2 DN150 DN125
115 60 FIREPAK-E21 115/60 WTM 65-250 30 WTM 65-250 30 DJ-MV 708 3 DN150 DN125
115 75 FIREPAK-E21 115/75 WTM 65-250 37 WTM 65-250 37 DJ-MV 708 3 DN150 DN125
126 55 FIREPAK-E21 126/55 WTM 80-200 30 WTM 80-200 30 DJ-MV 706 2,2 DN150 DN125
126 64 FIREPAK-E21 126/64 WTM 80-250 37 WTM 80-250 37 DJ-MV 708 3 DN150 DN125
126 75 FIREPAK-E21 126/75 WTM 80-250 45 WTM 80-250 45 DJ-MV 708 3 DN150 DN125
126 85 FIREPAK-E21 126/85 WTM 80-250 55 WTM 80-250 55 DJ-MV 708 3 DN150 DN125

1001
FIREPAK-E21 & FIREPAK-ED21
Fire Pumps Set

Specifications

Main Pump Standby Pump Jockey Pump Diameter


Q H
Model Power Power Power
(m3/h) (mWC) Model Model Engine Model Suction Discharge
(kW) (kW) (kW)
12 45 FIREPAK-ED21 12/45 WTM 32-200 4 WTM 32-200 EKM 186 5,9 DJ-MV 705 1,8 DN100 DN65
12 65 FIREPAK-ED21 12/65 WTM 32-250 5,5 WTM 32-250 EKM 186 5,9 DJ-MV 708 3 DN100 DN65
12 75 FIREPAK-ED21 12/75 WTM 32-250 7,5 WTM 32-250 EKM 12DL 7,5 DJ-MV 708 3 DN100 DN65
12 85 FIREPAK-ED21 12/85 WTM 32-250 7,5 WTM 32-250 EKM 12DL 7,5 DJ-MV 708 3 DN100 DN65
18 40 FIREPAK-ED21 18/40 WTM 32-200 4 WTM 32-200 EKM 186 5,9 DJ-MV 705 1,8 DN100 DN65
18 55 FIREPAK-ED21 18/55 WTM 32-250 5,5 WTM 32-250 EKM 186 5,9 DJ-MV 708 3 DN100 DN65
18 65 FIREPAK-ED21 18/65 WTM 32-250 7,5 WTM 32-250 EKM 12DL 7,5 DJ-MV 708 3 DN100 DN65
18 75 FIREPAK-ED21 18/75 WTM 32-250 7,5 WTM 32-250 EKM 12DL 7,5 DJ-MV 708 3 DN100 DN65
24 40 FIREPAK-ED21 24/40 WTM 40-200 5,5 WTM 40-200 EKM 186 5,9 DJ-MV 705 1,8 DN125 DN80
24 50 FIREPAK-ED21 24/50 WTM 40-200 7,5 WTM 40-200 EKM 12DL 7,5 DJ-MV 705 1,8 DN125 DN80
24 55 FIREPAK-ED21 24/55 WTM 40-250 9,2 WTM 40-250 EKM 290 13,5 DJ-MV 706 2,2 DN125 DN80
24 65 FIREPAK-ED21 24/65 WTM 40-250 11 WTM 40-250 EKM 290 13,5 DJ-MV 708 3 DN125 DN80
24 75 FIREPAK-ED21 24/75 WTM 40-250 15 WTM 40-250 EKM 290 13,5 DJ-MV 708 3 DN125 DN80
36 45 FIREPAK-ED21 36/45 WTM 40-200 7,5 WTM 40-200 EKM 12DL 7,5 DJ-MV 705 1,8 DN125 DN80
36 55 FIREPAK-ED21 36/55 WTM 40-250 11 WTM 40-250 EKM 290 13,5 DJ-MV 706 2,2 DN125 DN80
36 70 FIREPAK-ED21 36/70 WTM 40-250 15 WTM 40-250 EKM 290 13,5 DJ-MV 708 3 DN125 DN80
48 40 FIREPAK-ED21 48/40 WTM 50-250 9,2 WTM 50-250 EKM 290 13,5 DJ-MV 705 1,8 DN125 DN100
48 50 FIREPAK-ED21 48/50 WTM 50-250 11 WTM 50-250 EKM 290 13,5 DJ-MV 705 1,8 DN125 DN100
48 60 FIREPAK-ED21 48/60 WTM 50-250 15 WTM 50-250 EKM 290 13,5 DJ-MV 706 2,2 DN125 DN100
48 70 FIREPAK-ED21 48/70 WTM 50-250 18,5 WTM 50-250 EKM 380Q 22 DJ-MV 708 3 DN125 DN100
48 80 FIREPAK-ED21 48/80 WTM 50-250 22 WTM 50-250 EKM 380Q 22 DJ-MV 708 3 DN125 DN100
66 40 FIREPAK-ED21 66/40 WTM 50-250 11 WTM 50-250 EKM 290 13,5 DJ-MV 705 1,8 DN125 DN100
66 50 FIREPAK-ED21 66/50 WTM 50-250 15 WTM 50-250 EKM 380Q 22 DJ-MV 706 2,2 DN125 DN100
66 60 FIREPAK-ED21 66/60 WTM 50-250 18,5 WTM 50-250 EKM 380Q 22 DJ-MV 708 3 DN125 DN100
66 70 FIREPAK-ED21 66/70 WTM 50-250 22 WTM 50-250 EKM 380Q 22 DJ-MV 708 3 DN125 DN100
80 45 FIREPAK-ED21 80/45 WTM 65-200 18,5 WTM 65-200 EKM 380Q 22 DJ-MV 705 1,8 DN150 DN125
80 55 FIREPAK-ED21 80/55 WTM 65-200 22 WTM 65-200 EKM 380Q 22 DJ-MV 706 2,2 DN150 DN125
80 70 FIREPAK-ED21 80/70 WTM 65-250 30 WTM 65-250 EKM 480Q 29 DJ-MV 708 3 DN150 DN125
80 80 FIREPAK-ED21 80/80 WTM 65-250 37 WTM 65-250 EKM 490 37 DJ-MV 708 3 DN150 DN125
90 50 FIREPAK-ED21 90/50 WTM 65-250 22 WTM 65-250 EKM 380Q 22 DJ-MV 706 2,2 DN150 DN125
90 60 FIREPAK-ED21 90/60 WTM 65-250 30 WTM 65-250 EKM 480Q 29 DJ-MV 708 3 DN150 DN125
90 69 FIREPAK-ED21 90/69 WTM 65-250 30 WTM 65-250 EKM 480Q 29 DJ-MV 708 3 DN150 DN125
90 80 FIREPAK-ED21 90/80 WTM 65-250 37 WTM 65-250 EKM 490 37 DJ-MV 708 3 DN150 DN125
115 45 FIREPAK-ED21 115/45 WTM 65-250 22 WTM 65-250 EKM 380Q 22 DJ-MV 706 2,2 DN150 DN125
115 60 FIREPAK-ED21 115/60 WTM 65-250 30 WTM 65-250 EKM 480Q 29 DJ-MV 708 3 DN150 DN125
115 75 FIREPAK-ED21 115/75 WTM 65-250 37 WTM 65-250 EKM 490 37 DJ-MV 708 3 DN150 DN125
126 55 FIREPAK-ED21 126/55 WTM 80-200 30 WTM 80-200 EKM 480Q 29 DJ-MV 706 2,2 DN150 DN125
126 64 FIREPAK-ED21 126/64 WTM 80-250 37 WTM 80-250 EKM 490 37 DJ-MV 708 3 DN150 DN125
126 75 FIREPAK-ED21 126/75 WTM 80-250 45 WTM 80-250 EKM 490Q 42 DJ-MV 708 3 DN150 DN125
126 85 FIREPAK-ED21 126/85 WTM 80-250 55 WTM 80-250 EKM 4102 55 DJ-MV 708 3 DN150 DN125

1002

You might also like