Professional Documents
Culture Documents
® GREASE INTERCEPTOR
WITH USER NOTIFICATION SYSTEM TAG _____
Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice
PREFIXES
_____ Z Acid Resistant Coated Fabricated Steel*
_____ ZS All Type 304 Fabricated Stainless Steel
SUFFIXES
_____ -AL Aluminum Cover
_____ -L Angle type (Z1108-L) flow control device with plunger.
NOTE:
* 1. Factory installed sensor box is mounted on the left or right hand side of the unit when facing inlet (must be specified).
2. Power supply 120V GFCI.
3. Recommended Installations: Sitting on the floor or recessed in a pit only. (A pit installation requires that a drain or
sump pump be installed to keep the pit relatively dry).
4. Location of inlet/outlet from bottom of interceptor cannot be changed.
*REGULARLY FURNISHED UNLESS OTHERWISE SPECIFIED DWG. NO. 82335 PRODUCT NO. Z1170-UN
ZURN INDUSTRIES, LLC. ♦ SPECIFICATION DRAINAGE OPERATION ♦ 1801 Pittsburgh Ave. ♦ Erie, PA 16514
Phone: 814\455-0921 ♦ Fax: 814\454-7929 ♦ World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED ♦ 3544 Nashua Drive ♦ Mississauga, Ontario L4V1L2 ♦ Phone: 905\405-8272 Fax: 905\405-1292