Professional Documents
Culture Documents
Drive Design X-2306
Drive Design X-2306
INPUT
Known Belt: PowerGrip HTD DriveR DriveN
2000-8M - 30.00 mm Known Size: 40 Grooves 140 Grooves
Speed Ratio: 3.50 Down RPM: 1447.0 413.4
Input Load: 7.5 kW, Efficiency: 92.00 % Maximum Rim Speed: 33 m/s 33 m/s
Service Factor: 2.0 Shaft Diameter: 38 mm 2.5 in
Design Power: 15 kW
Center Distance: 627.0 mm Bushings Checked: TL, MPB
Motor Standards: Electric Motor, 3-Phase Belts Checked: PowerGrip HTD
SELECTED DRIVE
Belt Type: PowerGrip HTD - 8M Belt DriveR DriveN
Part No: 2000-8M-30 40-8M-30 140 Grooves
Speed Ratio: 3.50 Down Product No: 9293-12200 Non-Stock Item
dN RPM: 413.4 Top Width: -- 60.00 mm --
Rated Load: 12.33 kW Weight: 372 g -- --
Belt Pull: 1239 N Rim/Belt Speed: 7.7 m/s 7.6 m/s 7.7 m/s
Center Distance: 627.0 mm RPM: 231.5 1447.0 413.4
Install/Take-Up Range: 602.9 mm to 628.3 mm Bushing Part No: -- 1615*38mm --
Bore: -- 38 mm --
Bolt Torque -- -- --
Pitch Diameter: -- 101.9 mm 356.5 mm
This report: (1) only applies to Gates’ products; (2) contains confidential information; (3) may only be disclosed to support
the sale or maintenance of our products; and (4) is not a guarantee of performance.
Gates products are not designed, manufactured, or tested for use on aircraft applications, including aircraft propeller or
rotor drive systems, and all manned or unmanned airborne applications of any type. Lift and Braking systems have special
considerations. Buyer has sole responsibility for the selection and testing of products for any intended use.
This Report and any product referred to in this Report are subject to Gates Standard Terms and Conditions of Sale, including
all disclaimers, exclusions and limitations of warranties, express and implied. These Terms may be found at
ww2.gates.com/termsofsale.