Professional Documents
Culture Documents
Lightning Monitoring
System LM-S
Acquiring and evaluation
of lightning currents
Optimum maintenance planning with Acquiring and evaluation
the LM-S lightning monitoring system The sensors are mounted on the lightning arrester cables.
They record the magnetic field that occurs around the
conductor due to the lightning surge current. The measured
result is transmitted to the optoelectronic module of the
evaluation unit via fiber optics, where the optical signal
is converted into an electrical signal. Based on the values
You can be informed online of lightning obtained, the evaluation unit determines the lightning
characteristic with the typical parameters, such as the
strikes in your system and benefit from the maximum lightning current strength, lightning current rise
option of adaptive maintenance. time, charge, and energy.
Rugged IP67 sensor
Order No. 2800616
LM-S detects and analyzes all the important
parameters of lightning surge currents.
The actual system load can be derived
from this. Based on this information you
can determine whether any checks or
maintenance are required. LM-S connecting cable
with variable cable length
Order No. 1402190/BFOC/PPCME/cable length[m] Remote monitoring in realtime
• Building
• Telecommunications technology
• High and peak voltage technology
• Traffic engineering
• Industry
Further information on the products
presented here and on the world of solutions
from Phoenix Contact can be found at
www.phoenixcontact.net/catalog
Or contact us directly.
Connection Technology for
Field Devices and Field Cabling
Pluscon
Device Connection T
echnology
and Electronic Housings
Combicon
Printed in Germany
Automation Components
and Systems
Automation
MNR 52006556/27.02.2012-01