Professional Documents
Culture Documents
CAD/CAM (ME4007)
Class: CC01
Group: 01
Instructor: PhD. Tôn Thiện Phương
LIST OF MEMBER
Group 1 i
Instructor: Ph.D Ton Thien Phuong Table of content
TABLE OF CONTENTS
List of member......................................................................................................................i
Table of Contents................................................................................................................ii
COMPARISON BETWEEN MANUFACTURING VERSION........................................1
First version:....................................................................................................................1
Second version:................................................................................................................1
Third version:..................................................................................................................2
Fourth version:.................................................................................................................2
Fifth version:....................................................................................................................3
MANUFACTURING..........................................................................................................4
FIRST OPERATION: cAVITY MILL WITH END-MILL 10mm.....................................9
SECOND OPERATION: FIXED CONTOUR WITH BALL-END-MILL 6mm.............12
THIRD OPERATION: CONTOUR AREA WITH BALL-END-MILL 4mm.................15
FOURTH OPERATION: CONTOUR AREA WITH BALL-END-MILL 4mm.............18
REFERENCE....................................................................................................................21
Group 1 ii
Instructor: Ph.D Ton Thien Phuong Part 7: Manufacturing
Second version:
Total time: 04 hrs 33 mins 59 secs
Maximum height: 1.6142 mm
Group 1 1
Instructor: Ph.D Ton Thien Phuong Part 7: Manufacturing
Third version:
Total time: 09 hrs 58 mins 31 secs
Maximum height: 2.1693 mm
Fourth version:
Total time: 11 hrs 06 mins 56 secs
Maximum height: 1.6142 mm
Group 1 2
Instructor: Ph.D Ton Thien Phuong Part 7: Manufacturing
Fifth version:
Total time: 08 hrs 41 mins 29 secs
Maximum height: 2.1323 mm
Group 1 3
Instructor: Ph.D Ton Thien Phuong Part 7: Manufacturing
MANUFACTURING
We choose 1st version due to the machining time.
First, we choose the MCS mill for the part
Group 1 4
Instructor: Ph.D Ton Thien Phuong Part 7: Manufacturing
We will select the part by click on this and select the part we want
Then we will choose the blank for the part base on what we have which have the size is
100x100 mm and 30mm depth. The type we choose is Bounding block
Group 1 5
Instructor: Ph.D Ton Thien Phuong Part 7: Manufacturing
After that we will create a tool by clicking on this icon and choose which type of tools we
want. For example, we got the parameter of the tool like this:
Group 1 6
Instructor: Ph.D Ton Thien Phuong Part 7: Manufacturing
Group 1 7
Instructor: Ph.D Ton Thien Phuong Part 7: Manufacturing
Click ok and after that we will choose the diameter for the tool
Group 1 8
Instructor: Ph.D Ton Thien Phuong Part 7: Manufacturing
Next, we select the part is the workpiece and the cut area is all the object on the surface
of MCS plane
Group 1 9
Instructor: Ph.D Ton Thien Phuong Part 7: Manufacturing
After hitting the generate and specify button below the Action bar we can create a 3D
Dynamic visualization of the product
Group 1 10
Instructor: Ph.D Ton Thien Phuong Part 7: Manufacturing
Then we click on the Analyze button to observe the Range Colors and Limits
Group 1 11
Instructor: Ph.D Ton Thien Phuong Part 7: Manufacturing
Next, we select the part is the workpiece and the cut area is all the object on the surface
of MCS plane
Group 1 12
Instructor: Ph.D Ton Thien Phuong Part 7: Manufacturing
After hitting the generate and specify button below the Action bar we can create a 3D
Dynamic visualization of the product
Group 1 13
Instructor: Ph.D Ton Thien Phuong Part 7: Manufacturing
Then we click on the Analyze button to observe the Range Colors and Limits
Group 1 14
Instructor: Ph.D Ton Thien Phuong Part 7: Manufacturing
Next, we select the part is the workpiece and the cut area is all the object on the surface
of MCS plane
Group 1 15
Instructor: Ph.D Ton Thien Phuong Part 7: Manufacturing
Group 1 16
Instructor: Ph.D Ton Thien Phuong Part 7: Manufacturing
After hitting the generate and specify button below the Action bar we can create a 3D
Dynamic visualization of the product
Then we click on the Analyze button to observe the Range Colors and Limits
Group 1 17
Instructor: Ph.D Ton Thien Phuong Part 7: Manufacturing
Next, we select the part is the workpiece and the cut area is all the object on the surface
of MCS plane
Group 1 18
Instructor: Ph.D Ton Thien Phuong Part 7: Manufacturing
Group 1 19
Instructor: Ph.D Ton Thien Phuong Part 7: Manufacturing
After hitting the generate and specify button below the Action bar we can create a 3D
Dynamic visualization of the product
Then we click on the Analyze button to observe the Range Colors and Limits
Group 1 20
Instructor: Ph.D Ton Thien Phuong Reference
REFERENCE
[1] Joze Duhovnik, Ivan Demsar, Primoz Dresar, 2014, “Space modeling with
SolidWorks and NX”, Springers.
[2] P. Nageswara Rao, 2010, “CAD/CAM: Principles and Applications”, The McGraw
Hill Companies.
[3] P. Radhakrishnan, S. Subramanyan, V. Raju, 2008, “CAD/CAM, CIM”, New Age
International Publishers.
Group 1 21