Professional Documents
Culture Documents
3.Outlines
< Update software contents >
(1) Correspondence for the updated standard (NCM-2150, CMJ-2250)
The software was updated because the following standards were updated.
・ETSI EN 300 338-1, ETSI EN 300 338-1 Version 1.3.1 -> Version 1.4.1
・IEC61162-1 Edition 4 -> Edition 5
a) Added an option for changing the work frequency when a DSC call is received.
b) Added the function to display the currently selected position information source and quality
information.
*Refer to attached document “APPENDIX 1 Information of the software modification” for details.
(2) Correspondence to discontinued parts (NDZ-227)
The software was updated to conform to the specifications of the substitute parts, because the Flash ROM
has been discontinued. The modified software can be used in the Flash ROM of discontinued parts /
substitute parts.
< Update software version >
Software version / Maintenance number
Item Unit Software version name
Before After
(1) Correspondence to the NCM-2150 6.00 / 6.15 6.01 / 6.19
WRC-12
updated standard CMJ-2250 4.00 / 4.02 4.01 / 4.08
(2) Correspondence to WRC-12 2.00 / 2.55 2.00 / 2.56
NDZ-227
discontinued parts non DSC AP / DSC AP 1.00 / 2.31 1.00 / 2.32
< Obtaining the software>
The new software can be downloaded from the Marine Service Dept. web site. Refer to the attached
document “APPENDIX 2 Latest software and document” for software combination details. Regarding a
software version mismatch, refer to the attached document “APPENDIX 3 WRC-12 software supplementary
information” for details.
4.Attached document
1) APPENDIX 1 Information of the software modification
2) APPENDIX 2 Latest software and document
3) APPENDIX 3 WRC-12 software supplementary information
JD19725A ( 1 / 3 )
APPENDIX 1 Information of the software modification
1. Summary
To Correspond to the ETSI update(EN 300 338-1 & -2: from Ver.1.31 to Ver.1.4.1), we have
modified the software of the JSS-2xxx series as follows.
3. Modified content
3.1 Modified list
The difference between V.1.3.1and V.1.4.1 is the following list.
Auto:
Priority1:GPS
Prioritr2:GLONASS
Priority3:Galileo
Priority4:Other
Manual:Operator can set the
priority.
Fig.1
JD19725A ( 2 / 3 )
Fig.2
3) New setting menu to display the position source and quality information.
Added the menu to select Normal or Quality on the screen as shown on Fig.3 for
displaying the position source information. When the Quality is selected the quality
information will be indicated as shown on Fig.4.
Fig.3
Position source information:
GPS :GPS
GL :GLONASS
GA :Galileo
OTH :Other
Quality information:
INVALID:Fix not available or invalid
STD :SPS (Standard Positioning Service) mode
DIFF (DGPS, DGL, DGA, DOTH)
:Differential mode
PREC :PRS (Precise Positioning Service) mode
Fig.4 RTK :Real Time Kinematic mode
FRTK :Float RTK mode
EST :Estimated (dead reckoning) mode
*Note: Refer to Instruction manual Chapter9.3(3) MAN :Manual input mode
“Indication about the positioning system and SIM :Simulator mode
the quality type” for details.
JD19725A ( 3 / 3 )
1) Added option to enable/disable automatic frequency change (EN300 338-2 clause 6.3-n)
Standby)
Added the menu to select ON/OFF for automatic frequency change as shown on Fig.5.
Fig.6
JD19801A (1/4)
CAH-2415 2150_PA_0210.P1M
CMJ-2250 2150_MODEM_0408.M1M ✓
CMN-2250 2150_TRX_0200.T1M
NDZ-227 NDZ227J_0256.BIN ✓
CMC2425/2450 2250-2500_PA_0240.P1M
CMJ-2250 2150_MODEM_0408.M1M ✓
CMN-2250 2150_TRX_0200.T1M
NDZ-227 NDZ227J_0256.BIN ✓
CAH-2415 2150_PA_0028.P1M
CMJ-2250 2150_MODEM_0065.M1M
CMN-2250 2150_TRX_0020.T1M
NDZ-227 NDZ227J_0232.BIN ✓
CMC2425/2450 2250-2500_PA_0040.P1M
CMJ-2250 2150_MODEM_0065.M1M
CMN-2250 2150_TRX_0020.T1M
NDZ-227 NDZ227J_0232.BIN ✓
CAH-2415 2150_PA_0028.P1M
CMJ-2250 2150_MODEM_0056.M1M
CMN-2250 2150_TRX_0020.T1M
NDZ-227 NDZ227J_0232.BIN ✓
CMC2425/2450 2250-2500_PA_0040.P1M
CMJ-2250 2150_MODEM_0056.M1M
CMN-2250 2150_TRX_0020.T1M
NDZ-227 NDZ227J_0232.BIN ✓
JD19801A (3/4)
3. Software mounting unit
JSS-2150 150W MF/HF Radio Equipment
NTD-2150 MF/HF Transceiver
NBDP option
CMJ-2250 CAH-2415
NDZ-227 NCM-2150 WKR MODEM PA unit
DTE Controller
NFC-2150
ATU
NDF-369 CMN-2250 CBD-2415
Keyboard TRX unit PS unit
(*1) 2019.04.22 Revision of controller, WKR Modem and DTE software, refer to the technical information JD-1391-19.
■ Procedure ■
(1) Press the MENU key, and through hierarchical menus, select 7.3 My controller. 7.3)My controller
1.LCD adjustment
(2) Move the cursor to 8. Frequency digits with the numeric keypad or jog dial, and 2.Sound
3.User key assign
press ENT. 4.Tx meter :PWR
5.Data transfer
6.Menu shutdown :10min
(3) Select the digit with the jog dial, and press ENT. 7.CH search ref :40
8.Frequency digits :7 only
7 only:
The frequency indication is always 7 digits. 7.3)My controller
(E.g. 12,345.67kHz)
3.User key assign
6 & 7: 4.Tx meter :PWR
5.Data transfer
The frequency indication is normally 6 digits. 6.Menu shutdown :OFF
7.CH search ref :40
(E.g. 12,345.6kHz) 8.Frequency digits :7 only
Frequency setting by the numeric keypad is 6 digits only. 9.Freq dial step :0.01kHz
0.Back
In the following case, the frequency is indicated by 7 digits.
・ Setting of 7 digits of ITU channel number by the data terminal
・ Receiving of 7 digits of frequency in the DSC message.
■ Procedure ■
(1) Press the MENU key, and through hierarchical menus, select 5. Radio
operation.
Move the cursor to the right as shown in the figure at right to select a
communication mode.
(3) Select the CH setting with the jog dial, and press ENT.
Apply: Telex channel is set to new channeling arrangement of amended Appendix 17 by the first radio
survey after January 2017.
Note In the new channel, some of the old channel cannot be used, and the channel number has also
changed from the old channel.
If you want to use the old channel, please select "Not apply".
Not apply: Telex channel is set to old channeling arrangement of amended Appendix 17 by the first radio survey
before January 2017.
JD19X11A ( 3 / 4)
2. Mismatch example of a combination as correspondence
2.1. Mismatch of Controller and Transceiver
LCD screen on mismatch selection (example)
Mismatch selection NCM-2150 LCD screen Correspondence
WRC-12:
1. Upgrade Data terminal to WRC-12 software.
2. Connect PC to Controller.
Controller: NCM-2150 3. Upgrade each unit of Transceiver to WRC-12
CDJ3775W MNo.6.10 or later software.
Transceiver: NTD-2150/2250/2500
CAH2415 MNo:0.28 or before Non-DSC AP/DSC AP:
CMC2425 MNo:0.06 or before 1. Connect PC to Controller.
CMC2450 MNo:0.06 or before 2. Downgrade Controller to Non-DSC AP / DSC
CMJ2250P MNo:0.65 or before AP software.
CMN2250 MNo:0.20 or before 3. Downgrade each unit of Transceiver to
Non-DSC AP / DSC AP software.
4. Downgrade Data terminal to Non-DSC AP /
DSC AP software.
Controller: NCM-2150
Non-DSC AP/DSC AP:
CDJ3775W MNo.6.10 or later
1. Turn off power supply of Transceiver.
2. After removing RS-232 cable between Controller
Data terminal: NDZ-227
and Data terminal, turn on power supply.
CDC1346DR MNo:2.32 or before
3. Connect PC to Controller.
4. Downgrade Controller to Non-DSC AP / DSC AP
software.