Professional Documents
Culture Documents
Main features
Easy power management setup
The AGC 150 includes Easy Connect. This means:
• When gensets are connected via CANbus, the controllers auto-
matically detect each other.
• If later more gensets are connected via CANbus, these will also
be detected automatically.
• Application configuration possible via the display.
Hybrid support
Generator controller in a micro-grid system, together with DEIF
controllers ASC-4 (PV and Battery).
General description
The AGC 150 is an easy-to-use control unit containing all New design - Easy to mount
necessary functions for protection and control of a genset. Adaptive mimic, with easy switching between applications.
Compact design making it suitable for all applications.
It can be used as a single unit for one genset, or it can be
connected in a complete power management system with up to Guided experience
32 controllers for synchronizing projects, island or parallel to the Only buttons relevant for a function are visible to the user.
mains. The power management systems handles the load sharing
between gensets and the load dependant start and stop. User levels in settings
Configure three user levels with a password for each level:
AGC 150 contains all necessary 3-phase measuring circuits, and
Customer, Service and Master. Configure each parameter for
all values and alarms are presented on the sun-shine proof LCD
a user level, and only the parameters relevant for the user are
display. shown.
Shortcut menu
Configurable shortcuts gives the user easy access to commonly
Applications used functions.
The AGC 150 is a compact all-in-one unit designed for the
PLC functions
following applications: Programmable functions (M-Logic) in a user-friendly enviroment.
Plant mode Application Alarm and Event logging
View historical alarms and events on the display and with the
Island mode Power plant with synchronizing generators or
Utility Software (up to 500 alarms and 500 events).
a stand-alone generator. It can also be used in
critical power plants.
Graphical Display
Automatic Mains Critical power/emergency standby plants, black View important genset and/or system information on the easy-
Failure start generator.
to-read graphical display, shown as text, symbols, numbers, and
even a graphical synchroscope.
Fixed power Power plant with fixed kW setpoint (including
building load). Built-in analogue AVR and GOV control
Eliminates the need for external equipment (voltage and PWM).
Peak shaving Power plant where generator supplies peak load
demand paralleled to the mains. CIO support
AGC 150 supports CANbus based I/Os, which increases the
Load take-over Plant mode where the load is moved from mains
number of inputs and outputs.
to generator, e.g. peak demand periods or periods
with risk of power outages. Tier 4 final support
Mains power Power plant with fixed kW set point (excluding
AGC 150 can be used with the latest electrical Tier 4 Final
engines, and show values requested by the standard.
export building load).
• Graphical display:
Key functions and features • LCD, back-lit
• Engine start sequences. • High resolution, 240 x 120 pixels
• Engine and generator protections. • Six lines
• Enigne communication via CANbus. • Effective down to -40 °C
• Run coil and crank configurable when using Electric engine. • Five key navigation menu.
• Tier 4 Final support with clear alarm indications. • Event log with 500 entries (can be exported to a CSV file).
• Diesel and gas genset support. • Alarm log with 500 entries (can be exported to a CSV file).
• 3-phase generator and busbar sensing.
• Phase compensation for D/Y transformer.
• Four current sensing inputs.
Digital AVR support
• Built in governor and AVR outputs for control.
• State-of-the-art synchronization and loadsharing capabilities. Together with DEIF’s DVC 310 digital voltage controller, the AGC
• Synchroscope and sync check. 150 is supporting features as Engine AID (for the rental market)
• Digital voltage regulation support for different DVR. and fast and secure CBE critical power start-up (run-up syncing).
• Voltage and frequency matching.
• Three synchronisation methods: Dynamic, Static and Close
before excitation. Highly configurable
• 12 digital outputs (configurable).
• 12 digital inputs (configurable). • Controller configuration from the front panel (PIN code
• Two analogue outputs (-10 to 10 V). protected)or with free PC tool via USB, Ethernet & RS485.
• Four multi-inputs: • PC tool with trending and wizards helping the user with
• Resistor, 0 to 4000 Ω
configuration.
• Voltage, 0 to 10 V
• 20 configurable views.
• Current, 4 to 20 mA
• Four free configurable PID controllers.
• Digital input
• CAN flags between controllers.
• CANbus based extension module for Inputs/Outputs.
• Deadbus sensing. • Real time clock.
• Ground relay. • User configurable logic (lite PLC).
• Mains support for stand-alone system (AMF). • Ethernet communication for PLC, SCADA or BMS.
• Analogue load sharing with external box. • Multi-language support (incl. Chinese, Russian and other
• 128 genset support via digital loadsharing (CANshare). languages).
• ROCOF and Vector jump protection.
• Fuel usage monitoring.
• Maintenance alarms.
Three software packages
• Grid support.
The AGC 150 can be equipped with three different software
packages: Core, Premium and Extended.
Power management See the data sheet for a more detailed description of each
• A power management system can include up to 40 controllers package.
(32 genset or mains support and 8 Bustie breakers).
• ASC support (Solar, Battery).
• ALC support (load management).
• Load sharing support via PM with AGC-3, AGC-4, AGC 200
• Droop mode.
Easy overview
• Remote monitoring support with Insight.
• Weekly scheduler.
• Emulation for testing and frontload commissioning.
• Built-in Guided experience to help the user.
• Engine alarms in clear text on the display.
Typical wiring
L1 P1 P2 L1
s1 s2
G
L2 P1 P2 L2
s1 s2
L3 P1 P2 L3
s1 s2
N N
GB MB
K2 K1
P2 s2 ‐ ‐
‐
MB GB
P1 s1
+ K1 K2 feedback feedback
56 57 58 59 60 61 62 63 64 65 8 9 10 11 12 13 14 15 16 17 18 39 40 41 42 43 44 45 46 47 48 49 50 66 67 68 69
GB/TB on
GB/TB off
Com (s2)
GB/TB on
GB/TB off
L1 (s1)
L2 (s1)
L3 (s1)
L4 (s1)
L4 (s2)
MB on
MB off
DC (+)
MB on
MB off
Out
Out
Out
Out
Out
Out
L1
L2
L3
L1
L2
L3
In
In
In
In
In
In
In
In
N
N
AC voltage AC voltage
USB
AC current CT-side A-side DC output (configurable) Digital input (configurable) B-side
Supply Engine start Analogue input Tacho CAN A ECU CAN B PMS RS4851 RS4852 Analogue output
Eternet
Data (GND)
Data (GND)
Data (GND)
Data (GND)
Data + (A)
Data + (A)
GOV (+)
AVR (+)
Data - (B)
Data - (B)
Emerg.stop
GOV (-)
AVR (-)
Run coil
DC (+)
DC (-)
Crank
SCR
GND
High
High
Neg
Low
Low
Pos
D+
In
In
In
In
1 2 4 5 6 7 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 51 52 54 55
120 120
+ % P T
Tacho
Engine
+
GND
B+ GOV
Fuel M G D+
‐
ECU
AVR
120
+ -
Dimensions
173.9 mm (6.85 in)
44.2 mm
(1.74 in)
4 © Copyright DEIF A/S 2018. All rights reserved. Document no. 4189341187A